基于双目视觉的返回舱着陆横向速度测量

通过分析返回舱在着陆时所具有的水平速度也可能对着陆安全构成威胁的事实，论述了为返回舱增加横向缓冲装置的必要性，由此提出亟需解决的问题——在返回舱着陆下降过程中测量其水平运动速度。提出了全新概念的以视觉图像为唯一信息来源的返回舱水平速度测量方法，仅以双目摄像机系统作为传感器，避免了对返回舱原有传感器系统的改造。通过对着陆区域地面图像的采集和在线处理，利用双目交会测量原理得到返回舱当前的大地坐标和姿态。仿真实验证明，方法简单易行，测量结果可靠。     

海洋大气环境下微动开关触点回跳时间增大故障的试验复现与分析

结合某型微动开关触点回跳时间增大导致某系统故障问题,设计了由干湿交替酸性盐雾试验和湿热试验组成的海洋大气环境效应加速模拟试验剖面,选取与外场故障件型号一致的微动开关为研究对象,通过实验室加速模拟试验,成功复现了外场故障现象,并结合试验结果对腐蚀性环境、电烧蚀等因素对触点回跳时间增大的影响机制进行了分析。     

Application of the Method of Integral Manifolds for Construction of Resonant Curves for the Problem of Spacecraft Entry into the Atmosphere

The separation of motions into slow (precession) and fast (nutation) components in the problem of the entry of a spacecraft (SC) with a small asymmetry into the atmosphere is considered. For the separation of the slow and fast motions the method of integral manifolds is used together with the asymptotic method for singularly perturbed systems. The separation of motions allows one to isolate the frequencies that are functions of the slow variables of a system, and further on, after determining the integer relations between them, to construct the resonant curves (surfaces). This method gives the possibility to analyze the conditions of the emergence of resonances for a SC at angles of attack that are not small and when aerodynamic characteristics are nonlinear. Examples of the construction of resonant curves for a SC with typical aerodynamic characteristics are considered.     

环月轨道一体式星敏感器热设计及仿真验证

文章提出了一种适用于环月轨道条件下的一体式星敏感器的复合热设计方案。一体式星敏感器自身热耗集中,在环月轨道条件下受太阳辐射和月球红外辐射共同影响,散热条件恶劣。利用热管、热控涂层、多层和电加热器等热控措施相结合的方法,解决了环月轨道条件下的一体式星敏感器的散热问题。通过仿真分析,星敏感器最高温度36.7℃,满足单机温度要求。     

一种弹目遭遇点预测方法

为充分利用舰空导弹中制导段所获信息并减小导弹中制导段的弹道曲率,给出一种弹目预测遭遇点的解算方法,并据此设计比例导引制导律。在初始发射坐标系中,假设目标由当前位置以当前速度大小沿当前速度方向匀速运动至遭遇点,导弹由当前位置以当前速度大小按照一定的导引规律匀速运动至遭遇点。在该假设条件下,导弹到达遭遇点的总航路大小一方面...     

不同气体对涡流管能量分离效果的影响

通过实验的方法,分别对以空气、氮气、氩气和二氧化碳等气体为工质的涡流管的能量分离效应进行了研究,得出了涡流管的冷热效应、制冷量、单位制冷量和COP(性能系数,CoefficientofPerformance)随冷流率变化的特性曲线.研究表明:涡流管的冷热效应与工质的摩尔质量有着重要的关系,摩尔质量越大,其制冷和制热性能就越好;另外,在一定程度上还受气体本身的焦耳-汤姆逊系数的影响.对于制冷量和COP,除了跟工质的制冷效应和比热容有关外,跟摩尔质量也存在着相应的正比关系.      

基于数字近景摄影测量的天线变形测量

文章介绍了基于数字近景摄影测量原理的天线变形测量方法。该方法利用2台CCD相机交会摄影来获取被测面图像,并对被测面上特殊标志点进行中心坐标提取,然后利用光束法平差解算标志点中心坐标。测量精度可达到1:50000,可用于卫星天线研制过程中空间环境模拟试验的检验,为卫星天线在轨正常工作提供可靠性保证。     

Approximate analytical solutions of stability problems for skew plates under combined loading

The known analytical solutions of the linearized stability problems for rectangular hinged plates under the combined loading are generalized to the similar problems for skew plates, the deformation mechanics of which is described by the equations of the classical theory formed in the oblique Cartesian coordinates.     

A lower bound estimate of the critical load for helicopter main rotor composite blade according to the limit equilibrium theory. The basic steps of an algorithm

The basic steps of an algorithm are given for calculating the parameters of the limiting state of a helicopter main rotor blade. To estimate the static strength, a technique of elastic constants variation is used; it is based on the limit equilibrium theory and enables us to obtain the upper and lower bounds for the critical load simultaneously. An iterative technique is proposed to determine the lower bound of the allowable load on the root section of the composite blade depending on the azimuthal angle of its turn in the helicopter hovering mode.     

Application of high-order accurate methods to solve the computational gas dynamics and aeroacoustics problems

The application of the low dissipative high-order accurate scheme for numerical solution of the Euler and Navier-Stokes equations in the two-dimensional statement is considered. The scheme of calculating space derivatives is the seven-point central-difference approximation of the fourth order with the coefficients optimized to reduce the dispersion errors. The optimized six-step Runge-Kutta method is used for evaluating the time derivatives. By means of filtration, spurious pulsations are suppressed and shocks are processed. The results of verifying the calculation scheme realized on the stationary problem of flow around the model turbine blades are presented.