Measuring the matter distribution within z = 0.2 cluster lenses with XMM-Newton

We present an analysis of seven clusters observed by XMM-Newton as part of our survey of 17 most X-ray luminous clusters of galaxies at z  0.2 selected for a comprehensive and unbiased study of the mass distribution in massive clusters. Using the public software FTOOLS and XMMSAS we have set up an automated pipeline to reduce the EPIC MOS and pn spectro-imaging data, optimized for extended sources analysis. We also developped a code to perform intensive spectral and imaging analysis particularly focussing on proper background estimate and removal. XMM-Newton deep spectro-imaging of these clusters allowed us to fit a standard β-model to their gas emission profiles as well as a standard MEKAL emission model to their extracted spectra, and test their inferred characteristics against already calibrated relations.     

材料非线性对复合材料层板损伤的影响

根据Hahn-Tsai非线性应力应变关系,用有限元方法对受拉伸载荷作用的含孔复合材料层板损伤演变进行了模拟计算,由非线性有限元方法得到的应力、应变以及最终载荷与以往线性分析方法得到的结果比较表明:考虑材料非线性可以提高计算精度;参数研究表明非线性系数的变化对正交各向异性板的影响较大,而对准各向同性板的影响较少.     

Seasonal-to-interannual variability of chlorophyll-a bloom timing associated with physical forcing in the Gulf of Cádiz

Seasonal-to-interannual variability of the winter-spring bloom in the Gulf of Cádiz, eastern North Atlantic, has been investigated using chlorophyll-a remote sensing (CHL). These data have been obtained from the GlobColour project; the temporal coverage extends from September 1997 to December 2010. In this study we develop a generic quantitative approach for describing the temporal variability in the shape of the winter-spring bloom within a region. Variability in both the timing and magnitude of the bloom in the basin has been evaluated as a function of physical properties in the water column such as Mixed Layer Depth (MLD, GODAS model), sea surface temperature (SST, from AVHRR radiometers), photosynthetically-active radiation (PAR, from ocean color data) and euphotic depth (Z_eu, from ocean color data). The analysis indicated that the timing, size and duration of the phytoplankton bloom in this area are largely controlled by both meteorological and oceanographic conditions at different scales; this means that it is likely to vary widely from one year to another.     

Relativistic electron fluxes and dose rate variations during April–May 2010 geomagnetic disturbances in the R3DR data on ISS

Space radiation has been monitored successfully using the Radiation Risks Radiometer-Dosimeter (R3D) installed at the ESA EXPOSE-R (R3DR) facility outside of the Russian Zvezda module of the International Space Station (ISS) between March 2009 and January 2011. R3DR is a Liulin type spectrometer–dosimeter with a single Si PIN detector 2 cm² of area and 0.3 mm thick. The R3DR instrument accumulated about 2 million measurements of the absorbed dose rate and flux of 10 s resolution. The total external and internal shielding before the detector of R3DR device is 0.41 g cm⁻². The calculated stopping energy of normally incident particles to the detector is 0.78 MeV for electrons and 15.8 MeV for protons. After the Coronal Mass Ejection (CME) at 09:54 UTC on 3 April 2010, a shock was observed at the ACE spacecraft at 0756 UTC on 5 April, which led to a sudden impulse on Earth at 08:26 UTC. Nevertheless, while the magnetic substorms on 5 and 6 of April were moderate; the second largest in history of GOES fluence of electrons with energy >2 MeV was measured. The R3DR data show a relatively small amount of relativistic electrons on 5 April. The maximum dose rate of 2323 μGy day⁻¹ was reached on 7 April; by 9 April, a dose of 6600 μGy was accumulated. By the end of the period on 7 May 2010 a total dose of 11,587 μGy was absorbed. Our data were compared with AE-8 MIN, CRESS and ESA-SEE1 models using SPENVIS and with similar observations on American, Japanese and Russian satellites.     

空间目标一维距离像重构的线性规划方法

高分辨一维距离像是空间目标故障诊断与识别的重要手段。针对典型的空间目标 ,文章采用稀疏成份分析法研究了一维距离像的超分辨重构和特征提取问题。将处理实信号的基寻踪方法推广到复信号 ,并利用约束最小二乘解提出了一种次优的距离像重构算法 ,实现了空间目标散射中心的有效分离。数值结果验证了其合理性和有效性。     

直接数字式合成技术之研究

直接数字式合成(DDS)技术,是近几年来发展迅速的一种频率合成新技术。DDS具有输出相对带宽宽、频率转换时间短、频率分辨力高且输出相位连续、可产生宽带正交信号,易集成等优点。在通信、雷达、遥控遥测、电子对抗、电子扩频以及现代化的仪器仪表工业等许多电子领域显示出广泛的应用前景。本文介绍了直接数字式合成技术的特点及其应用情况,阐述了DDS的基本原理并对其在应用中的一些合成方法做了相互对比。     

8802超低频标准相位产生器

８８０２超低频标准相位产生器采用数字技术，用Ｄ／Ａ变换方法产生正弦信号，由单片机控制频率和相位，频率由晶振综合产生，相位可数字预置，频率准确度高至±５×１０￣（－６），相位准确度高至±０．０００２°。介绍了主要技术指标、工作原理、技术特点和误差分析等。     

辅助平面法评定平面对平面倾斜度误差的数学模型

提出一种评定平面对平面倾斜度误差的新算法。该算法是通过确定辅助测量平面，在不含原理误差的条件下，快速、准确地确定符合其定义的倾斜度误差值。     

Radiation risk of the crew members of the expeditions on the "MIR" station during the 22nd solar activity cycle.

The radiation risk at the end of the flight was calculated for the members of the main expeditions on the "Mir" station. It was based on the absorbed dose dynamics data measured by the board dosimeter. The radiation damage models created for standards of the radiation safety of the space flights were used in the calculations. The analysis of the obtained values of the risk and its dynamics for some cosmonauts are presented in the topic. The risk values delta P are close to the limited levels given by equation of delta P = 0.6 x 10 x T(-4), [this equation appears also as delta RHrad = 0.6 x 10(-4) x T later in the text] where T--is flight duration in months.