智能天线结构模糊自适应变形控制实验研究

基于dSPACE半物理仿真系统和所研制的压电作动器,设计并构建了智能天线结构实验平台,进行了结构变形控制实验研究。实验中采用常规PID作为基本控制方法,并在此基础上设计了一种模糊自适应PID控制器,将两种方法对应的不同控制效果进行了对比。结果表明:在所给的实验条件下,基于压电材料可实现对智能天线结构变形的控制,作动器控制变形量最大可达166μm;两种控制方法均可对结构变形进行控制,模糊自适应方法的绝对位置控制精度达到±0.5μm;应用模糊自适应PID控制方法对结构进行变形控制,较之常规PID控制方法能够降低系统响应的超调量,缩短稳定时间,提高控制精度,得到更好的控制过程。     

Transport Characteristics of Macroparticles in Dusty Plasma Induced by Solar Radiation under Microgravity Conditions

The transport characteristics of macroparticles, charged by the solar radiation under microgravity conditions, were investigated by analyzing the videorecords of experiments carried out onboard the Mirorbital station. The temperature, distributions of velocities, charge, friction coefficient, and diffusion coefficient were obtained for bronze particles.     

The Solution of Some Problems of Optimizing the Processes of a Flexible Correction of Motion of Satellite Systems: I

The first of a series of problems of the optimization of correction of satellite systems, moving over near-circular orbits, is considered. The correction is accomplished by means of low-thrust engines and is supposed to be flexible, where only the parameters of the relative motion of satellites must be corrected. The problem has a large dimension, but is invariant with respect to renumbering of satellites. This allows us to decompose the problem, i.e., to find new variables, linearly dependent on old ones, in which the problem breaks down into a series of independent subproblems of low dimension. The decomposition is accomplished by means of the technique [1] based on the theory of linear representations of groups.     

Numerical Simulation of Impact Loading on Solid Propellant Within an Orthotropic Shell

The strain–stress state of the solid propellant rocket engines (SPREs) is simulated under impact. The effect of orientation of elastic and strength properties of orthotropic organoplastic shell material on the strain–stress state of the solid propellant is investigated. Normal and oblique impact of single steel cylinder projectiles, both simultaneous and at different times of multiple, converging steel spheric particles with SPRE are investigated in this study. The investigation is conducted numerically. The numerical modeling was carried out in a three-dimensional formulation by the method of finite elements for the continuous approach of the mechanics of a deformable solid. The destruction of the anisotropic material is described by the tensor-polynomial criterion of the fourth degree, which takes into account the influence of hydrostatic pressure.     

基于双目视觉的返回舱着陆横向速度测量

通过分析返回舱在着陆时所具有的水平速度也可能对着陆安全构成威胁的事实，论述了为返回舱增加横向缓冲装置的必要性，由此提出亟需解决的问题——在返回舱着陆下降过程中测量其水平运动速度。提出了全新概念的以视觉图像为唯一信息来源的返回舱水平速度测量方法，仅以双目摄像机系统作为传感器，避免了对返回舱原有传感器系统的改造。通过对着陆区域地面图像的采集和在线处理，利用双目交会测量原理得到返回舱当前的大地坐标和姿态。仿真实验证明，方法简单易行，测量结果可靠。     

On the dynamics of a novel manipulator with slewing and deployable links

Using a novel space platform-based manipulator with slewing and deployable links, the paper addresses two issues of considerable importance: (a) How important is it to model flexibility of the system? (b) How many modes are needed to adequately represent the elastic character? Results suggest that the fundamental mode is able to capture physics of the response quite accurately. Due to its massive character, the platform dynamics is virtually unaffected, even by severe maneuvers of the manipulator. Hence, treating the platform as rigid would save the computational cost without affecting the accuracy. Although the link flexibility does affect the manipulator's tip vibration, the joint and platform vibrations remain negligible. The revolute joint flexibility appears to be an important parameter affecting both the joint as well as tip responses. The information should prove useful in the design of this new class of manipulators.     

Influence of Trapped Plasma on the Structure of Collisionless Thin Current Sheets

Using both analytical and numerical models of the collisionless anisotropic current sheet generated by the impinging flows of transient ions, we have studied the self-consistent solutions taking the plasma trapped in the sheet into account. It is demonstrated that there exists a limited window in the space of system parameters where self-consistent solutions can exist. When the density of the quasi-trapped plasma is sufficiently large, a redistribution of the total current can be a cause of the sheet decay, when the local current of the trapped particles compensate (totally or in part) the main current in the center and at the edges of the sheet, while the total current generated by ions on the trapped trajectories vanishes.     

Using the PROGRESS transport spacecraft in structure of the International Space Station for realization of scientific experiments under microgravity conditions

The problem is considered of using the PROGRESS transport spacecraft, which will deliver the payload on the ISS, as a free flying platform for realization of space experiments. For maintenance of the ISS 5-6 PROGRESS flights per year are planned. Usually after delivery of the payload the PROGRESS undocks from the ISS and burns down in the Earth atmosphere. However, the operating conditions of its onboard systems allow to prolong operation and to make free flight near to the station and repeatedly to be docked to it. It is offered to use this possibility for performing experiments on Material Science.     

某改型导弹折叠舵的设计

详细介绍了××改型导弹折叠舵研究课题的成果。内容包括：主要设计要求、研制程序、方案的拟定、设计、试验及结果分析、结论等部分。通过试制及试验，证明把高强度扭力杆应用于折叠舵的展开机构具有展开能量大、展开时间短、重量轻、体积小、结构简单等优点。该项技术不但使××改型导弹折叠舵课题获得成功，而且可以推广应用到需要折叠与展开的其他飞行器上     

Optimum Number of Stages in a Staged Vehicle

The problem of optimum partitioning of a staged vehicle (SV) and determination of the minimal number of stages to provide for a maximum velocity in the vertical SV motion in a homogeneous gravity field is considered at a given value of payload mass.