柔性绳网动力学建模与天地差异性分析

采用有限元模型研究了柔性绳网系统的动力学特性。针对空间绳网直接弹射展开方式,首先将绳网离散为若干单元,各单元处理为非线性“半阻尼弹簧”模型,然后分别计算各单元所受气动力和重力,最终建立绳网系统多柔体动力学模型。基于所建立的动力学模型分别对柔性绳网在地面和太空展开的动力学过程进行了仿真分析,研究了绳网在展开面积、空间位形和飞行距离等方面的天地差异性及其动力学机理,为未来空间绳网系统的分析设计提供理论参考。     

风洞模型-支撑系统涡激振动测量与分析

以0.55m×0.4m低湍流航空声学风洞某模型及其支撑系统为研究对象,采用基于加速度传感器直接测量支撑系统和热线间接测量模型尾流相结合的方法,测量并分析了风洞模型-支撑系统的涡激振动模态,给出了测量方案和数据处理方法。采用基于加速度传感器的功率谱分析方法,获得了模型-支撑系统的三阶振动频率分别为31.1、120.9和221.4Hz;采用基于加速度传感器的频域滤波和频域积分方法,提高了有效信号的信噪比,获得了模型-支撑系统振动的振型和振动节点位置;采用热线测量模型尾流分离涡脱落频率的方法,获得了模型一阶和二阶振动的尾流涡激频率分别为31.1和124.1 Hz,并从测量尾流速度脉动量获得了模型振幅变化和抖振边界信息。实验结果表明,采用热线测量模型尾流从而分析模型振动的方法,有利于小尺度的模型振动测量,而且相对于加速度传感器装于模型表面的直接测量方法而言,对试验模型的绕流流场干扰较小,为测量风洞试验模型的涡激振动模态提供了一种方法。     

Challenges and perspectives of transport cargo vehicles utilization for performing research in free flight

Russian Progress transport cargo vehicles have successfully been used in different space station programs since 1978. At present time, they play an important role in the International Space Station (ISS) project. Main tasks performed by the transport cargo vehicle (TCV) in the station program are the following: refueling of the station, delivery of consumables and equipment, waste removal, station attitude control and orbit correction maneuver execution.     

New one-axis one-sensor magnetic attitude control theoretical and in-flight performance

New one-axis magnetic attitude control is proposed. Only one attitude sensor providing any inertial direction measurements is necessary, magnetometer is not used. The control may be used as a backup capability in case main actuators or some attitude sensors fail. Sun pointing is achievable using only three-axis Sun sensor, so the control may be used to lower the power consumption during battery charging. Asymptotic stability of different equilibria depending on the satellite inertia tensor is summarized. In-flight results from “Chibis-M” microsatellite are provided proving general control performance.     

Numerical investigation of the impact of asymmetric fuel injection on shock train characteristics

Numerical simulations are carried out to investigate the impact of asymmetric fuel injection on shock train characteristics using the commercial-code FLUENT. The asymmetry of fuel injection is examined by changing the fuel flow rates of the upper and lower wall fuel injectors. The numerical approach solves the two-dimensional Reynolds-averaged Navier–Stokes (RANS) equations, supplemented with a k-ω model of turbulence. As a result, different ways of fuel injections will always lead to shock train transitions, with the variations of shock train structure, strength and leading edge position. For symmetric fuel injection, the flowfield of the isolator is quite asymmetric with the boundary layer of the upper wall side developing much stronger than that of the lower wall, which is due to the heterogeneity of the incoming flow. Regarding to asymmetric fuel injection with more of lower wall side, though the pressures in the combustor are nearly the same, the first shock of the shock train converts between ‘Distinct symmetric X type shock’ and ‘Obscure and weaker asymmetric shock’ and the shock train leading edge moves upstream with the increase of the asymmetry level. With regard to asymmetric fuel injection with more of upper wall side, ‘incomplete asymmetric X type shock’ occurs and the shock train structures keep nearly the same with low level of fuel injection asymmetry. Unexpected results like unstart will happen when increasing the level of fuel injection asymmetry. And the isolator will come back to normal state by decreasing the differential of upper and lower wall sides fuel injections.     

载人航天器放电调节器稳定性研究

电源系统的稳定性是保证载人航天器在轨飞行可靠安全的要素之一。文章研究了应用混合型功率调节技术的电源系统放电调节器的建模方法,获得了系统开环传递函数,进行了仿真验证,在此基础上分析了影响放电调节器稳定性的因素,表明系统中存在过大的延迟会使系统的稳定性大幅降低甚至造成不稳定,地面试验结果验证了此结论的正确性。     

航天器热故障诊断专家系统推理机的设计

航天器在飞行过程中,经常发生各种故障,因此需要充分进行地面模拟试验.在航天器地面热试验的故障分析过程中,除了形成了可供故障诊断用的规则以外,还得到了许多具体的事例.后者很难用规则来准确地描述,但却是人类专家最珍贵的经验,必须加以利用.据此提出了基于事例推理和基于规则推理的混合推理机制,给出了具体的流程图,并就两种推理给出了相应的冲突消解策略.     

一种新型的基于预测的卫星资源分配方法

针对传统的按需分配方式所造成的长时延问题,提出了一种新型的基于业务预测的按需分配方法。该方法通过预测业务在等待队列中的长度,将预测信息发送给网络资源控制中心,再由控制中心动态地分配带宽资源,达到服务质量的要求。在阐述了按需分配和业务预测的基本算法后,通过仿真分析了不同的业务类型采用不同的预测信息发送间隔时间的时延性能,分析中考虑了实时业务比非实时业务享有更高的优先权,并且比较了常规按需分配与基于业务预测的按需系统分配方法的时延性能。仿真结果表明利用业务预测,选择合适的预测信息发送间隔时间,能够有效地改善带宽资源分配的时延性能,相比一般的按需分配方式服务质量有了明显的提高。     

基于建构主义理论抛锚式教学模型的ESP教学设计——以《客舱乘务英语》为例

基于建构主义理论指导下的抛锚式教学,强调以真实事件或真实问题作为教学活动的基础。本文针对当前高校ESP课堂教学的现状,简要分析了存在的问题及原因,由此引入建构主义学习理论的观点,并对将抛锚式教学方法融入到客舱乘务英语课的教学进行例析,以期改变传统ESP课堂教学的弊端,实现ESP以学习为中心的教学原则。     

GPS在气象火箭遥测跟踪上的应用

利用GPS全球定位系统、天线云台和宽波瓣天线组成的跟踪系统, 研究了接收位置信息与跟踪之间的时间差, 气象火箭理论弹道误差导致的中断跟踪,气象火箭探空仪分离后至初次定位前的跟踪, 天线云台转到359°位置后反转359°及跟踪过程中跟踪中断后的继续跟踪等关键问题,成功实现了气象火箭探空仪的遥测跟踪. 该跟踪系统在子午工程气象火箭试验中得到较好的应用, 此种跟踪方式相比传统雷达跟踪方式具有体积小、重量轻、操作简单、成本低、机动性强、跟踪可靠性强等诸多优点.