宽温域连续润滑的Ni3 Al 基自润滑复合材料

报道了一种从室温到1 000℃能够连续润滑的Ni3Al基自润滑复合材料.该材料选用高温强度和抗氧化性优异的Ni3Al金属间化合物为基体材料,利用多种高、低温固体润滑剂的复合和协同效应实现了宽温域连续润滑.本文介绍了利用真空热压烧结方法制备该自润滑复合材料的简要过程,研究了材料的高温力学性能,并在球盘式高温摩擦试验机(HT-1000型)和销盘式高速摩擦试验机上分别测试了不同温度和转速下Ni3Al基自润滑复合材料的摩擦磨损性能.结果表明,材料在1 000℃时具有优异的力学性能(压缩强度40～45 MPa)和自润滑性能(摩擦因数0.28 ～0.25),在高载和高速条件下具有稳定的更低的摩擦因数.     

基于自适应混合高斯模型的运动目标检测

随着智能视频监控应用领域的不断拓展,为了在各种复杂场景下都能快速稳定地检测出运动目标,众多研究者提出了很多解决方法。鉴于背景减除法自身在算法理论的复杂度小,且对不同场景适应性强的优点,成为运动目标检测研究领域的基础方法。而在背景减除法的各种背景建模方法中,混合高斯模型方法以其适应性强、灵活高效的优点成为该领域的经典方法。详细介绍了背景更新机制中常用的混合高斯模型,并据此研究了基于自适应更新率的高斯背景建模方法,经过对比试验,论证了改进方法在建模速度上的大幅度提升。     

氟聚物基含能反应材料研究进展

对氟聚物基含能反应材料进行了概述,介绍了反应材料的组分、结构特点以及制备关键技术,并对反应材料各项性能指标进行了综述,对氟聚物基反应材料的应用现状和前景进行了归纳和展望.     

催化点火气氢气氧推力器试验研究

为探索催化点火气氢气氧推力器的点火规律和相关性能,设计并搭建了1N催化点火气氢气氧推力器试验系统,进行了冷热试试验。试验成功实现了不同工况下的多次催化点火。结果表明:供给氧氢混合比控制在100时,推力器预燃室产生的点火温度为700℃,能够满足燃烧室点火要求;催化剂面积体积比对催化氢氧点火具有决定性影响,采用面积体积比大的催化载体可以实现常温(8℃)下的催化点火;另外,试验中氢氧燃烧产生的高温和试验结束后推力器内残留的液态水也对催化组件提出了一定的耐温性和防水性要求。     

表面热流可辨识性初步分析

表面热流的可辨识性分析可用于飞行器防热层内温度测量精度和测温点位置的确定,在工程上有较强的实用意义。从无量纲分析和仿真辨识出发,根据防热层材料热物性系数、测点位置、表面热流的频域特性等参数对表面热流辨识结果的影响规律,总结出了表面热流辨识问题的相似参数：基于表面热流频率参数的傅立叶数。此后,以这一傅立叶数为判据,针对不同测量误差值的情况初步建立起了表面热流可辨识性的准则和分析方法。     

Analysis of geometrically nonlinear shells of revolution based on the finite element method with the vector interpolation of desired quantities

In this paper, we present an algorithm for geometrically nonlinear finite element analysis of the shells of revolution. Use is made of the most proper algorithms for vector interpolation of displacements through the nodal unknowns and an efficient algorithm for obtaining the stress-strain increment relation at a step of loading. By comparing the results of analyzing a geometrically nonlinear shell of revolution obtained on the basis of the ANSYS software with the scalar interpolation of displacements with those obtained on the basis of an author-developed finite element, it has been shown that application of the FEM vector displacement interpolation leads to increasing the accuracy of the finite element solutions in analyzing the stress-strain state of the geometrically nonlinear shells.     

圆度仪的数字化测量

介绍了对圆度仪的数字化改造方法。讨论了测量数据的数字化处理的方法及利用单纯形法对测量对象圆度进行评定，给出了实际的测量结果。     

大迎角细长旋成体绕流结构演变过程实验研究

 通过烟流显示和测压实验, 系统地观察和分析了尖拱头细长旋成体绕流结构随迎角的演变过程。实验发现在不同迎角下, 不仅细长旋成体绕流结构形态不同, 而且不同流态结构的演变过程所含迎角范围较小,几乎在几度迎角内就可完成。     

Modelling of the electromagnetic field in the interplanetary space and in the Earth's magnetosphere

A magnetohydrodynamic model of the solar wind flow is constructed using a kinematic approach. It is shown that a phenomenological conductivity of the solar wind plasma plays a key role in the forming of the interplanetary magnetic field (IMF) component normal to the ecliptic plane. This component is mostly important for the magnetospheric dynamics which is controlled by the solar wind electric field. A simple analytical solution for the problem of the solar wind flow past the magnetosphere is presented. In this approach the magnetopause and the Earth's bow shock are approximated by the paraboloids of revolution. Superposition of the effects of the bulk solar wind plasma motion and the magnetic field diffusion results in an incomplete screening of the IMF by the magnetopause. It is shown that the normal to the magnetopause component of the solar wind magnetic field and the tangential component of the electric field penetrated into the magnetosphere are determined by the quarter square of the magnetic Reynolds number. In final, a dynamic model of the magnetospheric magnetic field is constructed. This model can describe the magnetosphere in the course of the severe magnetic storm. The conditions under which the magnetospheric magnetic flux structure is unstable and can drive the magnetospheric substorm are discussed. The model calculations are compared with the observational data for September 24–26, 1998 magnetic storm (Dst _min=−205 nT) and substorm occurred at 02:30 UT on January 10, 1997. This revised version was published online in August 2006 with corrections to the Cover Date.     

刘家峡右岸水电站模型试验的光路布置

使用二维激光多普勒测速仪（ＬＤＶ）对圆管中水注流进行测速时,对于窗口的设置、利用反射镜前向接收的方法和侧向接收方式等问题,本文进行了探讨,并总结了测量中的一些实际经验。