SIMULATION OF BLEED AIR BEHAVIOR DURING AIRCRAFT IN FLIGHT BASED ON FLOWMASTER

Bleed air system is one of the most important components of air management system(AMS).It acts as transfer pipes responsible for air supply at high temperature and pressure.The thermal and flow performance of the bleed air system is a key issue for the design of AMS since the characteristics of air source have a great influence on the anti-ice system,the environmental control system and other downstream system in need of high temperature pressurized air.Based on the one-dimensional lumped parameter technology,a computer analysis model of bleed air system is developed in order to analyze the thermal and flow behaviors of the nodal points in the pipeline network.The simulation are performed with a given flight assignment using the analysis model,and the results verify that the system meets the design requirements.     

Development and verification of an innovative photomultiplier calibration system with a 10-fold increase in photometer resolution

In this study, we construct a photomultiplier calibration system. This calibration system can help scientists measuring and establishing the characteristic curve of the photon count versus light intensity. The system uses an innovative 10-fold optical attenuator to enable an optical power meter to calibrate photomultiplier tubes which have the resolution being much greater than that of the optical power meter. A simulation is firstly conducted to validate the feasibility of the system, and then the system construction, including optical design, circuit design, and software algorithm, is realized. The simulation generally agrees with measurement data of the constructed system, which are further used to establish the characteristic curve of the photon count versus light intensity.     

Computational analysis of strength,stability, and durability for gas turbine engine exhaust frame

A computational technique, developed for analysis of strength, stability and low-cycle durability of GTE exhaust frame complex structure under operational and emergency loads is described. The presented technique, based on the ANSYS and STAR-CD engineering analysis software, and self-design software can improve the accuracy and efficiency of calculations, and reduce efforts on finite element mesh development, performing calculations and processing of results.     

起始年龄与二语语言能力相关性研究

近年来,中国的外语学习出现了低龄化的趋势,各种双语早教班和幼儿园的出现似乎在提醒人们,外语学习越早越好。语言习得关键期假说也成为二语习得领域的研究重点之一,语言学者们在外语学习的起始年龄对外语学习效率的影响力方面无法达成共识。在对比分析关键期相关研究的基础上,通过实证研究试图证明不同年龄开始接触英语的学习者在语言能力方面并没有显示出明显的差异,关键期假说不适用于主要基于学校教学的外语教学。     

基于.NET的航空锻造知识管理系统框架的研究

通过对目前国内航空锻造企业的调研针对航空锻造企业知识管理的需求,对航空锻造知识进行分类总结,利用面向对象技术建立了航空锻造模型。在VS2008的软件平台上提出了一种基于.NET平台的航空锻造知识管理系统框架,并以某一航空锻造企业为例开发了航空锻造知识管理系统,具有知识信息结构化、知识管理流程化、知识检索快捷化等特点,并实现了和CAPP系统集成,实现了锻造知识资源的共享,初步实现了锻造工艺的智能设计。     

Technique for physical simulation of gasodynamic processes in the turbomachine flow passages

In this paper, a technique for the refined determination of turbine stage model parameters to investigate gasodynamic processes in the turbine flow passages without regard to uncontrolled heat exchange with environment is suggested.     

Guidance law implementation with performance recovery using an extended high-gain observer

Guidance law of a homing missile is implemented using an extended high gain observer without the model assumptions on target maneuvers. First, for a class of multi-input–multi-output nonlinear systems, extended high-gain observers are used for output feedback control with partial practical stabilization. Then the method is applied to the guidance law implementation of a homing missile with bearing only measurement. Simulation results show satisfactory performance.     

异面压缩下六边形铝蜂窝平均塑性坍塌应力研究

为了研究铝蜂窝在准静态异面压缩下的平均塑性坍塌应力，基于简化的基本折叠单元理论，以单个完整铝蜂窝六边形单元为研究对象，根据能量守恒定律，形成一个基本折叠单元外力所做的功等于屈曲能和膜能的总和，由此分别假设铝蜂窝材料服从Tresca屈服准则或Mises屈服准则，给出了两个准静态异面压缩下铝蜂窝平均塑性坍塌应力的理论计算公式，试验结果验证了理论推导的正确性。提出的公式对研究铝蜂窝的异面压缩性能具有一定的工程指导意义。     

Real-time trajectory planning for UCAV air-to-surface attack using inverse dynamics optimization method and receding horizon control

This paper presents a computationally efficient real-time trajectory planning framework for typical unmanned combat aerial vehicle (UCAV) performing autonomous air-to-surface (A/S) attack. It combines the benefits of inverse dynamics optimization method and receding horizon optimal control technique. Firstly, the ground attack trajectory planning problem is mathematically formulated as a receding horizon optimal control problem (RHC-OCP). In particular, an approximate elliptic launch acceptable region (LAR) model is proposed to model the critical weapon delivery constraints. Secondly, a planning algorithm based on inverse dynamics optimization, which has high computational efficiency and good convergence properties, is developed to solve the RHCOCP in real-time. Thirdly, in order to improve robustness and adaptivity in a dynamic and uncer- tain environment, a two-degree-of-freedom (2-DOF) receding horizon control architecture is introduced and a regular real-time update strategy is proposed as well, and the real-time feedback can be achieved and the not-converged situations can be handled. Finally, numerical simulations demon- strate the efficiency of this framework, and the results also show that the presented technique is well suited for real-time implementation in dynamic and uncertain environment.     

卫星天线反射面板热形变面形误差检测方法

为实现航天卫星天线面板热形变面形误差高精度检测,提出利用三坐标测量系统搭载高精度激光位移传感器,对检测对象进行扫描测量;并通过对其系统误差来源进行分析、公差合理分配及误差控制,提出对测量系统进行整体优化,以满足所提出检测精度要求。为验证所提出方法的可行性,搭建测量系统,对标准试件的测量数据进行面形拟合,获得测量偏差优于±4.22μm/m2;分别制作常规铝板及光滑铝板作为测试对象,在其背部黏贴加热板的加热方式,以模拟卫星面板在实际工作环境中发生热形变。采用提出的方法对其进行了热形变面形误差检测实验,检测结果验证了所提出方法的可行性。