更高速(400+km/h)列车气动减阻技术发展与展望

合理有效的气动减阻技术是我国研发运营速度400+?km/h高速列车的过程需展开深入研究的重点内容.首先阐述了高速列车气动阻力的基本分布特征,并针对国外下一代更高速列车的气动减阻技术进行了调研,尤其分析了欧洲、日本和韩国的下一代更高速列车气动减阻技术的特征,总结了国外下一代高速列车气动减阻的关键技术与方法.然后根据列车气动减阻技术实施部位的差异,从列车头型优化以及转向架、受电弓和风挡等局部结构优化两个方面对我国目前高速列车气动减阻技术研究现状进行了分析和梳理,同时归纳了新型气动减阻技术的研究现状.最后在综合国外下一代更高速列车气动减阻技术与我国气动减阻技术研究的基础上,对我国更高速(400+?km/h)列车气动减阻技术中可行性较高且效果明显的发展方向进行了展望与建议,为我国更高速列车气动减阻技术的设计与发展提供有价值的参考.     

一种基于VPL 的元器件快速建模方法

为了更好地落实航空电子模块的可制造性设计审查工作,结合航空电子模块产品特点和技术要求,建设了基于Valor软件的PCB/PCBA设计与检测自动化分析系统.元器件模型库作为该系统的必要组成部分,其覆盖范围和数据精度对审查结果至关重要.本文将从元器件模型库建设必要性、建设过程和建模工艺要求三个方面进行阐述,并提出一种基于Valor VPL的元器件快速建模方法,应用结果表明,该方法能够高效构建满足系统审查精度的元器件模型,使大规模元器件模型库的建设成为可能.     

基于DLatLRR与VGG Net的红外与可见光图像融合

针对红外与可见光图像融合中特征损失严重、显著目标不突出的问题，提出了一种低秩表示分解与深度神经网络相结合的图像融合算法。首先，对源图像进行潜在低秩表示分解（DLatLRR），得到相应的低秩部分、显著部分及稀疏噪声。然后，分别采用16层的VGG Net模型和联合特征加权算法对低秩部分与显著部分进行融合，舍弃二者的稀疏噪声。最后，对融合得到的低秩部分和显著部分进行图像重建，得到最终的融合图像。实验结果表明:与其他算法进行比较，所提算法能够对图像的深层次细节特征进行融合，突出场景中的感兴趣区域，且融合图像的相关差异和、结构相似性、线性相关度等多种客观指标均有所提升，提升最大值分别为0.73、0.15、0.11，噪声产生率的最大缩减值为0.041 2。      

基于鸽群优化算法的实时避障算法

为保证机器人能安全无碰撞地抵达目标位置，提出一种在改进版圆形扩张（CSE+）法中融合鸽群优化算法的实时避障算法。所提算法引入对障碍物密集程度的判断机制，在障碍分布密集时选择最安全的路径，在障碍物分布稀松的环境中，利用鸽群优化算法在安全范围内寻找下一目标最优位置。此外，还引入了搜索树，可实现死角的检测与避免。仿真结果显示:所提避障算法能提高路径规划的性能，在障碍物分布稀松时效果更加明显，且可实现死角检测并能通过狭长通道。      

Effect of matching between the magnetic field and channel length on the performance of low sputtering Hall thrusters

Discharge characteristics of a non-wall-loss Hall thruster were studied under different channel lengths using a design based on pushing a magnetic field through a double permanent magnet ring. The effect of different magnetic field intensities and channel lengths on ionization, efficiency, and plume divergence angle were studied. The experimental results show that propellant utilization is improved for optimal matching between the magnetic field and channel length. While matching the magnetic field and channel length, the ionization position of the neutral gas changes. The ion flow is effectively controlled, allowing the thrust force, specific impulse, and efficiency to be improved. Our study shows that the channel length is an important design parameter to consider for improving the performance of non-wall-loss Hall thrusters.     

拉扭疲劳试验机同步校准技术研究

介绍了一种新型力值、扭矩多分量传感器，在此传感器的基础上，研究力值、扭矩两参数同步校准技术，从而实现了对拉扭疲劳试验机的系统校准，解决了以往分参数校准存在不可靠性的难题，保证了拉扭疲劳试验机各参数整体系统的准确性。     

Orbital stability close to asteroid 624 Hektor using the polyhedral model

We investigate the orbital stability close to the unique L4-point Jupiter binary Trojan asteroid 624 Hektor. The gravitational potential of 624 Hektor is calculated using the polyhedron model with observational data of 2038 faces and 1021 vertexes. Previous studies have presented three different density values for 624 Hektor. The equilibrium points in the gravitational potential of 624 Hektor with different density values have been studied in detail. There are five equilibrium points in the gravitational potential of 624 Hektor no matter the density value. The positions, Jacobian, eigenvalues, topological cases, stability, as well as the Hessian matrix of the equilibrium points are investigated. For the three different density values the number, topological cases, and the stability of the equilibrium points with different density values are the same. However, the positions of the equilibrium points vary with the density value of the asteroid 624 Hektor. The outer equilibrium points move away from the asteroid’s mass center when the density increases, and the inner equilibrium point moves close to the asteroid’s mass center when the density increases. There exist unstable periodic orbits near the surface of 624 Hektor. We calculated an orbit near the primary’s equatorial plane of this binary Trojan asteroid; the results indicate that the orbit remains stable after 28.8375?d.