A solar type U burst in the decimetric range

This paper analyzes a Type U burst at 1.0 – 2.8 GHz which occurred between 12:36:26 – 12:36:32 UT on 1992 August 22, observed by Ond ejov Observatory, Czech Republic. This may be the first example of Type U bursts in the decimetric range, as far as we know. From analysis we came to the following conclusion: (1) The frequency drift rates of the ascending and descending branches are 1.25 and 0.225 GHz/s, respectively, and the velocities of the electron beam are 0.38 c and 0.26 c, respectively; (2) The burst decay of the ascending branch is larger than that of the descending branch; (3) The variations of the maximum frequencies of instantaneous spectra with time appear as from the highest (1.92 GHz) to the lowest (1.0 GHz), then toward higher frequency (1.53 GHz) (this is consistent with that predicted by plasma emission theory); (4) The bandwidths of the ascending branch are about twice that of the descending branch (this may be caused by the larger drift rates of the ascending branch); (5) The temperature of the coronal loop apex is 6.3 × 10⁶ K; (6) The magnetic field at the top of the loop is greater than 9.2 G; (7) This U burst emission is plasma radiation at the second harmonic.     

Effects of prolonged exposure to space flight factors for 175 days on lettuce seeds

We have studied the effects of prolonged (up to 175 days) exposure of $\text{Lactuca sativa}$ seeds to space flight factors, including primary cosmic radiation heavy ions. The data obtained evidence a significant fourfold increase ofs pontaneous mutagenesis in seeds both with regard to the total number of aberrant cells as well as the formation of single cells with multiple aberrations. Comparison of the present experiment with earlier works shows that the frequency of such aberrations increases with the duration of the flight.     

Fluxes of Quasi-trapped Electrons with Energies >0.08 MeV in the Near-Earth Space on Drift Shells <Emphasis Type="Italic">L</Emphasis> < 2

We study the characteristics of fluxes of electrons with energy >80 keV in the near-Earth space regions corresponding to the drift shells L = 1.7, 1.4, and 1.1 observed during the entire period of the GRIF experiment onboard the Spectr module of the Mir orbital station from October 1995 to June 1997. The obtained geographic maps of the distribution of electron fluxes at the height of the station flight (400 km) and, also, the estimates of the spectra indicate that the South-Atlantic Anomaly provides for a mechanism of stable replenishment for shells with L < 1.5. The mechanism of stable replenishment of shells with L < 1.5 may be due to the scattering, in the residual atmosphere, of electrons from the inner radiation belt precipitating into the region of the South-Atlantic Anomaly.     

The waves observed in the ARAKS-East experiment

Experimental results of the Wave measurements over frequency range 0.1–5.0 MHz during the second launch of the ARAKS Experiment (15.02.75) are reported. The differences between the results of the first and the second launches are discussed.     

平板上钝缘舵在超声速绕流中的三维分离特性研究

对于平板上的直立钝缘舵在M_∞=1.79、2.04和2.50的条件下,研究了该平板干扰区中的三维分离特性。着重讨论了钝缘直径、舵面迎角和来流马赫数对主分离线位置和形状的影响。分析了该类三维分离在性态上更强地依赖于无粘流动特性。此外,还对分离区内的二次分离发展过程和形态进行了初步讨论。     

一种液体火箭发动机试验台螺纹拧紧力矩量化控制方法

针对液体火箭发动机试验台工艺装配可靠性提升的需求,提出一种螺纹拧紧力矩量化控制方法。利用非试验和试验环境的力矩值统计与分析,确定液体火箭发动机试验台螺纹拧紧力矩值区间;通过拧紧力矩强度理论计算,验证力矩值区间的合理性;结合试验台螺纹空间位置的具体特点,确定适用不同空间位置的力矩量化控制方法和流程,并在试验中进行了应用。应用结果表明,本文提出的方法可有效提高发动机试验工艺的可靠性。     

宇航矢量伺服控制器在SiP中的设计与实现

磁场导向控制FOC（field-oriented control）矢量控制算法在伺服驱动控制系统中一般由CPU或DSP实现，难以满足航天应用中实时性较高场景下的需求。为提高宇航电机系统控制的实时性与可靠性，从FOC矢量控制算法的硬件加速角度出发，详细介绍了伺服控制器的设计，给出了一种全数字、高性能的伺服控制器硬件加速设计方案，并在具有可编程逻辑功能的宇航级SiP6117S芯片上进行了验证。仿真实验表明，相比于前人的设计，通过调整观测数据的量化精度来降低硬件加速过程中的处理延时，能有效改善多级流水延迟并在一定程度上提升算法的实时性。     

纤维织物超高速碰撞热-力学模型与分析

A new thermo mechanical model for fiber fabric of hypervelocity impact is established by using the Johnson Cook model, the Gruneisen equation of state and the FEM SPH coupling algorithm, while some new factors are taken into account such as the heat generation, strain rate strengthening and high temperature softening of materials. Mechanical and thermal information could be obtained with the model, such as penetration, fragmentation, stress and strain, heat generation and temperature field of fiber fabric. The analysis results are in good agreement with the experimental results.     

Solution of the Problem of Optimal Spacecraft Launching into Orbit Using Reactive Acceleration and Solar Sail in Kustaanheimo–Stiefel Variables

Cosmic Research - Using the Pontryagin maximum principle and the Kustaanheimo–Stiefel variables, the spatial problem of optimal launching into a given orbit of a spacecraft (SC) controlled by...