基于经验模分解的PPP时间比对数据消噪方法

精密单点定位(PPP)时间比对数据会受到观测噪声的影响,因此对时间比对数据进行消噪是一项重要工作。提出一种基于经验模分解(EMD)的PPP时间比对数据消噪方法,并将该方法与Vondrak滤波方法的消噪效果进行对比。结果表明,两种方法的消噪效果相当,均能有效滤除PPP时间比对数据中的随机噪声,明显改善时间比对的稳定度。     

基于POD曲线的预警机雷达检飞概率模型

针对预警机雷达检飞试验中距离取样间隔及检飞航线边界条件的确定问题,以保证发现概率(POD)曲线的覆盖率与精确性为目标,提出基于POD曲线的预警机雷达检飞概率模型.首先,根据POD曲线的覆盖率和精确性要求确定检飞试验拟合曲线所需的采样点数.然后,根据POD曲线的经验分布函数建立检飞试验中最小探测距离和最大探测距离的计算方法,并由此确定检飞航线上距离取样间隔的长度.最后,根据发现概率的统计特性得到距离取样间隔内采样点数以及航次数等试验参数,为雷达检飞试验设计与预警性能评定提供定量依据.      

一类不确定分数阶混沌系统的滑模自适应同步

基于滑模自适应控制理论、Lyapunov稳定性理论和分数阶线性系统稳定性理论,在考虑系统存在模型不确定和外部扰动的情况下,选用一种具有较强鲁棒性的分数阶滑模曲面,设计了合适的自适应滑模控制器。所设计的控制器能够将系统状态控制到滑模面上,实现两个不确定分数阶混沌系统的同步,且不需事先知道不确定项上界。该控制器结构简单,控制代价小,具有较好的通用性,对未知扰动具有较强的鲁棒性。数值仿真验证了该方法的正确性和有效性。     

高精度激波捕捉格式的性能分析

在数值模拟激波-湍流干扰问题时,为了精确模拟湍流脉动的小尺度结构,数值格式应尽量减小自身的数值耗散.但是为了稳定、无震荡地捕捉激波,数值格式又必须具有一定程度的数值耗散.基于上述这2种相互矛盾的要求,采用无黏泰勒格林涡、可压缩湍流等经典算例对目前广受好评的几种高精度格式进行了系统地对比.一系列的计算分析表明,当前工程中广泛应用的高精度格式虽然都能一定程度地满足上述2种要求,但与理想目标仍有较大的差距.     

柔性绳网动力学建模与天地差异性分析

采用有限元模型研究了柔性绳网系统的动力学特性。针对空间绳网直接弹射展开方式,首先将绳网离散为若干单元,各单元处理为非线性“半阻尼弹簧”模型,然后分别计算各单元所受气动力和重力,最终建立绳网系统多柔体动力学模型。基于所建立的动力学模型分别对柔性绳网在地面和太空展开的动力学过程进行了仿真分析,研究了绳网在展开面积、空间位形和飞行距离等方面的天地差异性及其动力学机理,为未来空间绳网系统的分析设计提供理论参考。     

风洞模型-支撑系统涡激振动测量与分析

以0.55m×0.4m低湍流航空声学风洞某模型及其支撑系统为研究对象,采用基于加速度传感器直接测量支撑系统和热线间接测量模型尾流相结合的方法,测量并分析了风洞模型-支撑系统的涡激振动模态,给出了测量方案和数据处理方法。采用基于加速度传感器的功率谱分析方法,获得了模型-支撑系统的三阶振动频率分别为31.1、120.9和221.4Hz;采用基于加速度传感器的频域滤波和频域积分方法,提高了有效信号的信噪比,获得了模型-支撑系统振动的振型和振动节点位置;采用热线测量模型尾流分离涡脱落频率的方法,获得了模型一阶和二阶振动的尾流涡激频率分别为31.1和124.1 Hz,并从测量尾流速度脉动量获得了模型振幅变化和抖振边界信息。实验结果表明,采用热线测量模型尾流从而分析模型振动的方法,有利于小尺度的模型振动测量,而且相对于加速度传感器装于模型表面的直接测量方法而言,对试验模型的绕流流场干扰较小,为测量风洞试验模型的涡激振动模态提供了一种方法。     

Challenges and perspectives of transport cargo vehicles utilization for performing research in free flight

Russian Progress transport cargo vehicles have successfully been used in different space station programs since 1978. At present time, they play an important role in the International Space Station (ISS) project. Main tasks performed by the transport cargo vehicle (TCV) in the station program are the following: refueling of the station, delivery of consumables and equipment, waste removal, station attitude control and orbit correction maneuver execution.     

New one-axis one-sensor magnetic attitude control theoretical and in-flight performance

New one-axis magnetic attitude control is proposed. Only one attitude sensor providing any inertial direction measurements is necessary, magnetometer is not used. The control may be used as a backup capability in case main actuators or some attitude sensors fail. Sun pointing is achievable using only three-axis Sun sensor, so the control may be used to lower the power consumption during battery charging. Asymptotic stability of different equilibria depending on the satellite inertia tensor is summarized. In-flight results from “Chibis-M” microsatellite are provided proving general control performance.     

Numerical investigation of the impact of asymmetric fuel injection on shock train characteristics

Numerical simulations are carried out to investigate the impact of asymmetric fuel injection on shock train characteristics using the commercial-code FLUENT. The asymmetry of fuel injection is examined by changing the fuel flow rates of the upper and lower wall fuel injectors. The numerical approach solves the two-dimensional Reynolds-averaged Navier–Stokes (RANS) equations, supplemented with a k-ω model of turbulence. As a result, different ways of fuel injections will always lead to shock train transitions, with the variations of shock train structure, strength and leading edge position. For symmetric fuel injection, the flowfield of the isolator is quite asymmetric with the boundary layer of the upper wall side developing much stronger than that of the lower wall, which is due to the heterogeneity of the incoming flow. Regarding to asymmetric fuel injection with more of lower wall side, though the pressures in the combustor are nearly the same, the first shock of the shock train converts between ‘Distinct symmetric X type shock’ and ‘Obscure and weaker asymmetric shock’ and the shock train leading edge moves upstream with the increase of the asymmetry level. With regard to asymmetric fuel injection with more of upper wall side, ‘incomplete asymmetric X type shock’ occurs and the shock train structures keep nearly the same with low level of fuel injection asymmetry. Unexpected results like unstart will happen when increasing the level of fuel injection asymmetry. And the isolator will come back to normal state by decreasing the differential of upper and lower wall sides fuel injections.     

载人航天器放电调节器稳定性研究

电源系统的稳定性是保证载人航天器在轨飞行可靠安全的要素之一。文章研究了应用混合型功率调节技术的电源系统放电调节器的建模方法,获得了系统开环传递函数,进行了仿真验证,在此基础上分析了影响放电调节器稳定性的因素,表明系统中存在过大的延迟会使系统的稳定性大幅降低甚至造成不稳定,地面试验结果验证了此结论的正确性。