基于Web的邮件发送技术

以组件技术为基础 ,从软件工程的角度介绍了运用ASP技术 ,在Web服务器IIS4 0上 ,通过CDOforNTS组件 ,以网页的形式发送邮件的方法 ,给出了CDO与ADO相结合实现邮件批量发送的例子。     

基于有限元法的隧道荷载模型位移反分析

介绍了一种以荷载模型为求解对象的位移反分析法。它是以通用有限元软件为实验平台，利用隧道位移实测值建立荷载灵敏系数方程，根据最小二乘法原理反求隧道模型的荷载，再将正分析结果和实际值进行对比分析井重新调整隧道荷载模型，最终获得较为符合实际的隧道荷载模型。该方法的优点是既考虑了岩土松动荷载效应又能体现支护结构与周围岩土体的共同作用，且具有较好的操作性。     

固体火箭发动机地面性能换算成真空性能研究

根据固体火箭发动机内弹道计算模型，分析了使用大扩张比喷管地面静止试验性能与真空性能之间的联系，建立了由地面性能换算成真空性能的方法，计算出的真空推力、真空比冲等数据与实际相符。     

风洞模拟建筑物对大气污染物扩散影响的若干问题讨论

通过相似性分析,得到了大气污染建筑物影响风洞试验应满足的基本相似条件.由一个实例研究了利用常规风洞模拟装置和测试仪器进行大气污染建筑物影响风洞试验在技术上的可行性.结果显示:由于模拟装置和仪器条件的限制,在大多数风洞试验中存在大气边界层不完全模拟和仪器响应过慢等问题,但通过合理模拟来流的主要湍流特征和改进采样方法,可以在风洞中较真实地模拟建筑物对大气扩散的影响.     

eLoran系统ASF网格应用算法研究

ASF网格是提高增强型罗兰(Enhanced Long Range Navigation,eLoran)系统精度的重要方法。根据所在网格四个顶点的附加二次时延(Added Secondary Factor,ASF)值通过网格应用算法得到待测试点的ASF值,一定程度上比公式计算的ASF值更准确。在计算过程中,用户四个顶点ASF值的测量误差会传递给用户,同时内插算法本身也会引入误差,此时内插算法的选择尤为重要。本文通过仿真、分析比较几种常用的内插算法,得出结论:反距离插值算法引入的误差最大,双线应插值算法引入的误差最小,而且误差呈现一定层次感,网格从内到外误差逐渐减小。     

Solid nanomembrane manufacture using ion-plasma action

A process of manufacture of porous membranes made of aluminum foil (Al 99.99%) by the method of electrochemical anodic oxidation followed by a continuous barrier layer removal with ion-plasma irradiation is described. The membranes having a 8 mm diameter made from AL2O3 with a thickness from 2 to 5 microns thick with a regular channel arrangement are obtained. A possibility to change the channel diameter in the range of 20?C100 nm by adjusting voltage and temperature during the oxidation is shown. We present the experimental dependencies of aluminum and aluminum oxide sputtering coefficients on the energy and incidence angle of xenon ions within the energy range of 100??400 eV.     

Theoretical determination of shot peening process parameters

In this paper, a proper choice of technological parameters for a shot peening process is considered, namely, the shot diameter, shot blast velocity, density of shot material, and depth of a plastically deformed layer-depending on the material being processed. The data presented can be used in calculations of technological parameters of FV monolithic panel shaping.     

Influence of the 27-day solar flux variations on the ionosphere parameters measured at Irkutsk in 2003–2005

We present an investigation of the influence of the 27-day solar flux variations, caused by solar rotation, on the ionosphere parameters such as the F2 layer critical frequency (foF2) and the total electron content (TEC). Our observational data were obtained with the Irkutsk Digisonde (DPS-4) located at 52.3 North and 104.3 East during the period from 2003 to 2005. In addition, we use TEC data from the Global Ionosphere Maps (GIM) based on Global Positioning System (GPS) satellites. The solar radiation flux at a wavelength of 10.7 cm (F10.7 index) is used as an index characterizing the solar activity level. A good correlation between observed ionosphere parameters and solar activity variations is found especially in autumn-to-winter season. We estimate the impact of the 27-day solar flux variations on the day-to-day variability and determine the time delay of the ionosphere response.     

充气可展天线精度分析和形面调整

充气可展天线结构是以柔性薄膜材料制造的一种新型可展天线.对一类充气可展开天线系统进行结构设计,并相应地建立了充气结构的有限元分析模型.对充气反射面进行了精度分析,研究各参数对形面精度的影响,包括内压、膜材厚度、材料属性、天线焦距等;比较了3种实验姿态下重力对形面的影响,选择其中一种能够很好地模拟失重环境;针对特定的天线结构系统,提出了可行的形面调整新方法.分析和实验表明,调整方法能够有效提高形面精度.     

Application of high-order accurate methods to solve the computational gas dynamics and aeroacoustics problems

The application of the low dissipative high-order accurate scheme for numerical solution of the Euler and Navier-Stokes equations in the two-dimensional statement is considered. The scheme of calculating space derivatives is the seven-point central-difference approximation of the fourth order with the coefficients optimized to reduce the dispersion errors. The optimized six-step Runge-Kutta method is used for evaluating the time derivatives. By means of filtration, spurious pulsations are suppressed and shocks are processed. The results of verifying the calculation scheme realized on the stationary problem of flow around the model turbine blades are presented.