Materials selection for electronic enclosures in space environment considering electromagnetic interference effect

Using low power electronic devices for space applications to reduce the mass and energy consumption has lead to electromagnetic interference (EMI) problem. Electronic enclosures are used to shield electronic devices against EMI. In the past, electromagnetic shielding has been mainly the only criteria considered in electronic enclosure design. However, there are several structural and thermal requirements for selection of shielding materials which should also be taken into account. In this research work, three quantitative materials selection methods, i.e. Digital Logic (DL), Modified Digital Logic (MDL), and Z-transformation, are employed to select the best material from among a list of candidate materials. Composite and metallic electronic enclosures are explored and the best material is selected. Z-transformation method is applicable to both of the considered case studies while DL and MDL can only be used for solving one of them. Z-transformation method ranks aluminum as the first choice among various metallic materials. The wide range of Z-transformation application and its practical results confirm the superiority of Z-transformation method over DL and MDL methods.     

电子显示屏在高校图书馆工作中的应用

本文以北华航天工业学院图书馆的电子显示屏的使用为例,介绍了高校图书馆电子显示屏通过一定的控制方式显示文字、图形、二维或三维动画、电视等各种信息的方法,实现文本、图像、视频等多种内容形式的播放,彰显出电子显示屏在图书馆对外宣传服务中的优越性。     

Alfven modes of solar coronal magnetic arches: Excitation of ballooning instability and modulation of flare emission

The effect of Alfven-type oscillations in a coronal magnetic arch on modulation of the gyrosynchrotron radiation and development of the ballooning instability in the arch is considered. On the basis of the energy method and the method of normal modes, the expressions are obtained for increments of ballooning instability at its swinging by natural oscillations of the arch. The conclusion is drawn that bending oscillations, which do not actually compress the plasma and, therefore, represent the Alfven-type modes, unlike the radial oscillations, are capable, under solar corona conditions, to effectively swing ballooning instability and, as a consequence, play a part of a trigger for solar flares. The ballooning instability of coronal arches is shown to be capable of causing formation of helmet-shaped structures in the lower solar corona. On the basis of calculations of the intensity modulation depth and the degree of circular polarization of non-thermal gyrosynchrotron radiation, under the assumption of excited Alfven oscillations of a coronal arch, the conclusion is drawn, that microwave observations at a frequency of > 10 GHz can be used for studying the conditions of excitation and propagation of Alfven modes in flare loops. The consequences of obtained results are discussed using the flare on April 15, 2002 as an example.     

小功率电弧等离子体发动机实验数据采集系统

介绍了小功率电弧等离子体发动机的实验装置及数据采集系统,阐述其结构组成及工作过程,重点介绍了发动机工作推力、电流和电压的测量原理,并对数据采集系统的硬件配置、性能及软件的编制的原则、方法作了主要说明,给出典型实验所测结果.测量结果准确反映了实验工作过程.      

一种用计量光栅实现 2nm测量分辨率的新方法

提出一种利用正切函数在零点附近的小范围内线性度非常好的特点,对计量光栅技术中计算机正切细分法进行扩展,在信号处理电路中设计出一个量程比较小的精测档,以获得更高的纳米级的测量分辨率的新方法,并进行了详细充分的实验验证.     

天宫一号频繁轨控条件下快速测定轨精度及策略分析

2016年,中国将要执行空间站与货运飞船的快速交会对接试验,该试验要求飞船起飞后6 h完成与空间站的交会对接。工程实践中需要对飞船进行多次远导控制,其间留给快速定轨的数据时长最少可能只有5 min,这对短弧定轨精度提出了较高要求。利用天宫一号在轨运行期间实测数据开展了快速测定轨试验,试验频繁轨控条件下5 min数据时长的快速测定轨精度。试验结果表明,不同条件下短弧定轨精度差异较大,这为快速交会对接试验带来了较大风险。为了提高短弧定轨精度,制定了利用轨控前后数据联合解算轨控从而增加定轨数据弧段的方法提高短弧定轨精度的定轨策略。分析结果表明,该定轨策略有效提高了短弧定轨精度,可满足快速交会对接试验轨道维持控制要求。     

编队飞行卫星群描述及摄动分析

定义了一组新的编队飞行卫星群相对运动描述参数 ,以及基于此的构型设计方法 ;并分析了地球非球形摄动对这组参数的影响 ,给出了为消除摄动长期影响所需的速度脉冲量 ,并对部分参数给出了减少摄动影响的设计方法     

层流平板摩擦阻力的数值计算

为提高层流摩擦阻力数值计算的精度,采用数值求解N-S方程的方法,对层流平板摩擦阻力进行了计算.计算中采用4种先进上风格式,同时配合以14种不同的壁面法向网格分布和5种常用限制器,并将计算结果与布拉修斯解进行对比.结果表明,van Leer的FVS(Flux Vector Splitting)格式数值耗散大,对网格分布和限制器敏感,不适合用于摩擦阻力计算.限制器和计算格式的粘性分辨率越高,摩擦阻力的计算精度越高.在计算量允许的情况下,可以减小壁面法向第1层网格高度,以提高计算精度,但应同时兼顾网格长宽比.对于摩擦阻力计算,边界层内应至少布置4个网格点.      

Application of high-order accurate methods to solve the computational gas dynamics and aeroacoustics problems

The application of the low dissipative high-order accurate scheme for numerical solution of the Euler and Navier-Stokes equations in the two-dimensional statement is considered. The scheme of calculating space derivatives is the seven-point central-difference approximation of the fourth order with the coefficients optimized to reduce the dispersion errors. The optimized six-step Runge-Kutta method is used for evaluating the time derivatives. By means of filtration, spurious pulsations are suppressed and shocks are processed. The results of verifying the calculation scheme realized on the stationary problem of flow around the model turbine blades are presented.     

某型教练机嵌入式训练系统顶层设计技术研究

本文通过对该型教练机现有航空电子系统构型、驾驶员操作程序、接口控制文件深入研究,结合未来功能扩展需求,给出了合理的系统构型分析、功能分配、数据流规划、原相关系统软件改动分析,在此基础上还设计出了嵌入式训练系统技术方案.依据方案研制的嵌入式训练系统原理样机通过系统动态试验、航电系统地面综合试验和飞机地面通电试验,证明系统...