Application of high-order accurate methods to solve the computational gas dynamics and aeroacoustics problems

The application of the low dissipative high-order accurate scheme for numerical solution of the Euler and Navier-Stokes equations in the two-dimensional statement is considered. The scheme of calculating space derivatives is the seven-point central-difference approximation of the fourth order with the coefficients optimized to reduce the dispersion errors. The optimized six-step Runge-Kutta method is used for evaluating the time derivatives. By means of filtration, spurious pulsations are suppressed and shocks are processed. The results of verifying the calculation scheme realized on the stationary problem of flow around the model turbine blades are presented.     

某型教练机嵌入式训练系统顶层设计技术研究

本文通过对该型教练机现有航空电子系统构型、驾驶员操作程序、接口控制文件深入研究,结合未来功能扩展需求,给出了合理的系统构型分析、功能分配、数据流规划、原相关系统软件改动分析,在此基础上还设计出了嵌入式训练系统技术方案.依据方案研制的嵌入式训练系统原理样机通过系统动态试验、航电系统地面综合试验和飞机地面通电试验,证明系统...     

A software package for computer-aided design analysis of thin-walled structures from composite materials

An algorithm of analyzing the design parameters for a thin-walled wing from composite material based on the efficient distribution of structural material between load-carrying elements is described. We consider the problems of convergence acceleration for the iteration design analysis. Also presented are the examples of determining the design parameters for a superlight aircraft wing and the rational parameters of the filler in the form of a three-dimensional rod structure.     

Water feed influence on nitric oxide emission under oxidation of near-stoichiometric air-methane mixtures

We considered the influence of temperature on the nitric oxide emission under combustion of the near-stoichiometric mixtures with and without water feed. We revealed the advantage of the method of fuel-water-air mixture combustion over that of the leaned mixture combustion.     

Systems for the indication and display of secondary information in avionics and autobasing complexes

We consider the peculiarities of application for the cabin indicating systems of secondary information display, formulate and systematize the compositional and technical requirements for display systems and their elements. The tendencies and lines in the development of head-up displays for avionics and autobasing complexes were determined. The technique of calculating optics of such display systems with the use of electronic distortion compensation is presented.     

正反顺序加载下安装边螺栓预紧力分散度的数值模拟与试验验证

在航空发动机机匣安装边装配过程中,不同位置螺栓之间会产生弹性交互作用,不同加载方案会使装配后的螺栓预紧力存在一定的分散度。针对这一问题,建立了3层带止口机匣安装边3维接触有限元模型,研究不同加载方案下螺栓预紧力的施加方法。基于有限元模型数值模拟了3层机匣安装边分别在顺序加载方案、交叉加载方案和正反顺序2轮加载方案下螺栓预紧力的分散度。搭建了相应的试验装置,分别对3种加载方案的预紧力分散度进行试验验证。结果表明：采用正反顺序2轮加载后的螺栓预紧力分散度最小,在3层止口机匣安装边上采用正反顺序2轮加载方案后的螺栓预紧力分散度较小,在有限元仿真中螺栓预紧力分散度为2.43%,在试验中螺栓预紧力分散度为4.98%。采用此方案加载后,止口机匣安装边能达到更好的密封效果和较好的刚度对称性。     

钛合金结构损伤容限设计可行性研究

对飞机结构常用金属材料损伤容限特性进行了对比分析,针对TC4和TA15损伤容限特性较差的缺点,研制出两种超低间隙（ELI）钛合金TC4ELI和TA15ELI,并对其进行结构损伤容限设计可行性论证。进行了两种超低间隙钛合金和普通钛合金裂纹扩展寿命、剩余强度和疲劳全寿命对比实验。实验结果表明：具有片层组织的超低间隙钛合金相对于普通成分钛合金断裂韧性和裂纹扩展特性有明显改善,剩余强度和疲劳全寿命相当;应力水平相当时,超低间隙钛合金工程可检裂纹扩展寿命比航空结构中常用铝合金稍长。因此,对于超低间隙钛合金TC4ELI和TA15ELI可以进行损伤容限设计。     

崎岖地形中关节式月球车姿态估计数值求解方法

 以被动关节式地形自适应月球车为研究对象,融合关节机器人D-H坐标建模方法构建了月球车悬架运动学模型和以侧倾、俯仰和偏转角表示姿态的欧拉角方式建立了车轮到世界坐标系的悬架完整表达模型。利用悬架完整表达模型,用带有迭代因子的连续迭代和离散迭代数值求解方法,建立了光滑和离散崎岖地形姿态估计算法。最后以8轮扭杆双摇杆摇臂月球车原理样机为例来验证此模型求解方法。仿真结果验证了所建立的基于数值方法的崎岖地形被动关节式月球车姿态估计模型的正确性,其求解模型精度能够满足仿真要求。     

基于单学科可行法的多学科可靠性设计优化

 近年来对多学科系统中不确定性的研究逐渐增多。针对该问题的计算复杂性,利用序列优化及可靠性评估（SORA）框架,提出用单学科可行（IDF）方法来求解多学科可靠性设计优化（RBMDO）问题。此方法将可靠性分析和多学科设计优化分离开来,分为确定性多学科设计优化和可靠性分析两个问题顺序执行,以提高计算效率。可靠性分析和优化的过程都采用多学科设计优化中高效的方法——IDF方法。最后通过例子验证此方法的有效性,算例结果表明,采用基于IDF的方法,学科1和学科2所用的函数计算次数分别减少了28.9%和25.0%。     

波音787飞机装配技术及其装配过程

波音公司基于全球协同环境GCE研制的787"绿色"环保客机,虽然尚未试飞,但它的一系列全新的飞机装配理念、方法和技术,就已经引起航空制造业界的极大关注.