Evaluation of a Geiger-mode imaging flash lidar in the approach phase for autonomous safe landing on the Moon

The imaging flash lidar has been considered as a promising sensor for the future space missions such as autonomous safe landing, spacecraft rendezvous and docking due to its ability to provide a full 3D scene with a single or multiple laser pulses. The linear-mode flash lidar has been developed and demonstrated for an autonomous safe landing on the Moon in order to provide an accurate distance measurement to the landing site and its 3D image. Yet, the Geiger-mode flash lidar has also been recognized as an emerging technology for the space missions because it is highly sensitive even to a single photon and provides the very accurate timing of photon arrival. In this study, the performance of the Geiger-mode flash lidar is simulated in the approach phase and evaluated for the autonomous landing on the Moon. Furthermore, a new statistical signal processing algorithm is proposed to remove the noise counts in order to obtain the 3D image from a sequence of laser pulses in the situation of the fast moving spacecraft. The algorithm is shown to be effective for the autonomous landing due to its ability to remove noise events under the condition of low signal-to-noise ratio and improve ranging accuracy.     

低温动态准双轴拉伸加载下HTPB推进剂的热老化性能

为分析热老化后三组元端羟基聚丁二烯(HTPB)推进剂在低温动态准双轴加载下的性能，开展了不同热加速老化时间、不同温度和应变率条件下推进剂的准双轴拉伸力学性能试验及扫描电镜(SEM)观察试验。试验结果表明：热加速老化前后，推进剂的拉伸曲线趋势、力学性能变化规律及细观损伤形式保持一致，改进型非线性模型能够更好地描述1~100 s -1 应变率范围内典型力学性能参数随热老化时间的非线性变化关系。随温度降低，老化后推进剂的断面形貌由“脱湿”变为AP颗粒断裂，热老化、低温以及高应变率载荷的叠加使得推进剂的细观损伤变得更加严重，但准双轴拉伸时损伤程度相比单轴拉伸时有所减弱。热老化32 d、74 d和98 d后-50 ℃、 14.29 s -1 加载条件下的最大伸长率分别为未老化时室温、0.40 s -1 条件下数值的28.79%、27.58%和25.63%，该参数定义可为分析长期贮存后战术导弹SRM药柱在低温点火条件下结构完整性失效的准则提供数据支持。     

机翼防冰过程中冰脊问题的数值分析

对机翼防冰过程中冰脊的形成特点及冰脊对机翼气动特性的影响进行了计算分析.基于经典的Messinger结冰模型开发了多步结冰程序,对不同条件下过冷水滴的撞击结冰进行了热质耦合计算,计算结果和文献试验结果吻合较好,表明该热质耦合算法的正确性.在此基础上对不同环境温度、飞行速度和不同加热功率等条件下冰脊的生长特点和机翼的气动特性进行了计算分析.结果表明:在非霜冰条件下,冰脊主要在热防护极限外并紧挨着热防护极限的位置处形成和发展,而在霜冰条件下,冰脊主要在机翼下表面形成,但是在热防护区域内有显著的结冰出现,该条件下的结冰对机翼的气动特性具有较大的破坏性.     

Single-phase grid-connected PV system using three-arm rectifier-inverter

A grid-connected photovoltaic (PV) power supply system with on-line voltage regulation capability is presented. It employs the three-arm rectifier-inverter topology with PV modules connected directly on the dc-link. The common-arm is with line-frequency switching and synchronous to the input voltage, aiming for a lower switching loss and decoupling the control of rectifier and inverter portions. As a result, the rectifier and inverter portions can be controlled independently with the rectifier-arm and inverter-arm, respectively. For maximum power point tracking (MPFF) of the PV modules and balancing the power among utility, PV, and the load, a variable dc-link voltage is adopted and controlled by the rectifier-arm based on the MPPT control algorithm. The inverter-arm then regulates the load voltage with good regulation and low distortion. Due to large variation of the dc-link voltage, a feedforward plus feedback control technique with variable gain is developed to keep constant bandwidth of the current loop at any operation condition. Therefore, the performance of the rectifier and inverter portions can be ensured. A system containing a 2 kVA converter and a 1.2 kW PV module is set up, and some experimental results are provided for demonstrating the effectiveness of the proposed method.     

An efficient algorithm for multisensor track fusion

An efficient algorithm for track-to-track fusion by incorporating cross-covariance between tracks created by dissimilar sensors is described. An analytical solution of this problem is complicated if cross-correlation between sensors tracking the same target is taken into account. An explicit solution of the cross-covariance matrix at steady state is derived in terms of an integral. It is shown that solution of this integral involves inversion of a matrix whose elements are functions of parameters of individual trackers. Structure of this matrix is analyzed. An efficient analytical solution for inversion of this matrix is obtained. For fusion of similar sensors, it is shown that this matrix is reduced to the Routh-Hurwitz matrix which arises in the study of steady state stability of linear systems. Numerical results showing the amount of reduction of fused track covariance by taking into account the effects of cross-correlation between candidate tracks for fusion is also presented     

进口圆度仪智能化改造

以Talyrond73型圆度仪为例，介绍了圆度仪智能化改造的基本原理，圆度测量软件的主要功能以及回度误差评定方法的优化，探讨了保证检测精度的若干措施，并给出了检定结果。     

燃烧室燃烧与排放特性试验与数值计算

为了探寻燃烧室进口空气温度、压力以及油气比对点熄火边界、温升、燃烧效率以及主要排放物摩尔分数的影响规律， 对航空发动机燃烧室在多工况下的点熄火特性、出口温度分布与主要排放物摩尔分数进行了试验测试。分别采用正癸烷的简化 反应机理与C 12 H 23 燃料的单步反应机理，对该燃烧室火焰筒内流场结构、温度场、中间组分与主要排放物摩尔分数分布特性进行了 数值计算，并与相应试验数据进行了对比分析。结果表明：随着燃烧室进口空气温度、压力以及油气比的提高，燃烧室燃烧效率、 温升、出口平均温度与NO X 摩尔分数逐渐提高，而UHC与CO摩尔分数逐渐降低；与采用C 12 H 23 燃料单步反应机理相比，采用正癸 烷的简化反应机理计算得到的火焰筒内流场与温度场分布更为合理，火焰筒出口温度场分布以及主要排放物摩尔分数与相应试 验数据更为接近，计算精度得到较大提高。     

Estimation and analysis of GPS receiver differential code biases using KGN in Korean Peninsula

The total electron content (TEC) estimation by the Global Positioning System (GPS) can be seriously affected by the differential code biases (DCB), referred to as inter-frequency biases (IFB), of the satellite and receiver so that an accuracy of GPS–TEC value is dependent on the error of DCBs estimation. In this paper, we proposed the singular value decomposition (SVD) method to estimate the DCB of GPS satellites and receivers using the Korean GPS network (KGN) in South Korea. The receiver DCBs of about 49 GPS reference stations in KGN were determined for the accurate estimation of the regional ionospheric TEC. They obtained from the daily solution have large biases ranging from +5 to +27 ns for geomagnetic quiet days. The receiver DCB of SUWN reference station was compared with the estimates of IGS and JPL global ionosphere map (GIM). The results have shown comparatively good agreement at the level within 0.2 ns. After correction of receiver DCBs and knowing the satellite DCBs, the comparison between the behavior of the estimated TEC and that of GIMs was performed for consecutive three days. We showed that there is a good agreement between KASI model and GIMs.     

基于等基因序列双重随机遗传算法的复合材料铺层优化

复合材料铺层优化中常用的各种遗传算法，较难同时综合考虑表面45°、分层比例、连续铺层数限制等复杂工程约束问题，基于此，提出一种针对复合材料层压板的等基因序列双重随机遗传算法，在交换和突变算子中引入双重随机算法以保证优化迭代中基因序列的严格相等，基于SABRE 软件实现该优化算法，并通过算例验证算法的正确性。结果表明：该算法可满足均衡性、对称性、表面45°、连续铺层数限制、铺层比例等复杂工程约束，有较高的可靠性与工程适用性。