模拟地球同步轨道辐照环境对光学太阳反射镜性能的影响

研究了模拟地球同步轨道辐照环境对卫星用温控涂层-光学太阳反射镜(OSR)性能的影响。对所研制的两类OSR 片进行的辐照试验项目有,真空紫外辐照、低能电子和两种能量的质子辐照。此外还进行了等离子体环境条件下的表面充/放电效应试验。经过相当于安装在地球同步轨道卫星南北极位置处,在空间七年所受到的电子、质子和紫外辐照总剂量的辐照后,导电型OSR 的太阳光谱吸收率α_s 由0.068增加到0.078,法向发射率ε_n 由0.83降低到0.72;而非导电型OSR的α_s 由0.066增加到0.085,ε_n 由0.82降低到0.76。表面充/放电试验的结果表明:导电型OSR 的充电电位仅在15～40V 之间,而非导电型OSR 的充电电位则可高达13kV。因此导电型OSR能有效地控制表面的充/放电现象。     

低温度系数标准电阻器的研制

主要介绍了低温度系数标准电阻器的研制,包括采用的电阻合金材料、电阻合金材料的筛选、匹配与加工制作,低温度系数标准电阻器的技术参数、温度系数测量方法,减小温度系数采用的补偿方法,测试结果分析。     

Coronal mass ejection detection using wavelets,curvelets and ridgelets: Applications for space weather monitoring

Coronal mass ejections (CMEs) are large-scale eruptions of plasma and magnetic field that can produce adverse space weather at Earth and other locations in the Heliosphere. Due to the intrinsic multiscale nature of features in coronagraph images, wavelet and multiscale image processing techniques are well suited to enhancing the visibility of CMEs and suppressing noise. However, wavelets are better suited to identifying point-like features, such as noise or background stars, than to enhancing the visibility of the curved form of a typical CME front. Higher order multiscale techniques, such as ridgelets and curvelets, were therefore explored to characterise the morphology (width, curvature) and kinematics (position, velocity, acceleration) of CMEs. Curvelets in particular were found to be well suited to characterising CME properties in a self-consistent manner. Curvelets are thus likely to be of benefit to autonomous monitoring of CME properties for space weather applications.     

Visualization and PIV study of wing-tip vortices for three different tip configurations

The planform, profile, and cross-sectional views of the wing-tip region of a half-wing model with an aspect ratio of 3.2 and three different wing configurations, namely, square-cut, simple fairing, and Whitcomb?s full winglet wing-tip, were visualized at various angles of attack using smoke-wire visualization technique. Visualization pictures clearly show that the wing-tip vortices at different angles of attack and wing-tip configurations had distinct formation and structure characteristics. A comparison of simple fairing and Whitcomb?s winglet configurations shows that the wing-tip vortices of the Whitcomb?s winglet configuration were reduced in strength and displaced outboard and upward, at least in the near-wake region. This resulted in an increased lift-to-drag ratio for the Whitcomb?s winglet configuration. The changes in the wing-tip vortex characteristics and the improved aerodynamic performance of the winglet were confirmed by Particle Image Velocimetry (PIV) measurements of the cross-flow velocity of the wing-tip trailing regions and the force measurement of the model.     

某飞行器防热材料力学性能测试与分析

按照飞行过程中的防热层温度变化情况,对某飞行器防热材料进行了不同温度下的弯曲性能测试。测试结果表明,该防热材料在升温和降温过程中,在相同温度点具有明显不同的力学性能。根据材料性能测试结果,用有限元方法进行模拟,进一步得出该材料的弯曲模量与拉伸模量的关系,为防热结构进行有限元分析提供材料性能数据支撑。     

金属弹簧管性能影响因素的仿真分析

为了研究高温密封组件金属弹簧性能,本文通过对波音公司编网状弹簧管结构和Streck心脏支架结构的研究,建立了编织弹簧的几何拓扑构型和数学模型,推导了弹簧直径计算公式。采用AUTODESK3D-MAX构建了编织弹簧的仿真模型,用ANSYS仿真软件分别从编织丝直径、编织密度以及编织方法 3方面探究不同测试对弹簧性能的影响。结果表明,增加弹簧丝直径、降低弹簧管轴向方向的编织密度、提高圆周方向的编织密度、向外的弹簧管编织方式可有效提高弹簧管的回弹性能。     

三叉杆式万向联轴器采用调心轴承时的运动分析

分析了三叉杆式万向联轴器采用调心轴承时输出转角和输入转角之间的关系式,并得出这种联轴器为准等角速传动万向联轴器的结论;讨论了轴偏转角大小对输出输入转角差值的影响,分析表明,这种联轴器中转角差值的变化周期是输入轴自转周期的3倍。     

科学评价党史，正确处理历史遗留问题——论邓小平指导党史研究的基本原则

本文系统阐述了邓小平同志指导党史研究、正确处理历史遗留问题的六大原则：“向前看”原则;“宜粗不宜细”原则;“有错必纠”原则;客观性原则;分析个人责任与分析复杂背景相结合的原则;总结成功经验与汲取失败教训相结合的原则。文章深入分析了上述原则的内涵、要求及其意义。     

A Discrete Method for Parameter Identification in Linear Systems with Transport Lags

Linear dynamical systems with transport lags are characterized by linear differential-difference equations. The task of identifying unknown parameters in such systems from the input-output data is difficult due to mathematical complications associated with differentialdifference equations. This paper presents a method which solves the identification problem. The method is digitally oriented and shows how a continuous-time system can be identified by discrete techniques. The solution is based on Kalman's least square method. The identification procedure essentially involves two steps: 1) discretizing the continuous system via finite difference approximation, and 2) estimating the parameters through the identification of the resulting discrete model. Experimental results have verified the validity of the proposed method.     

Security applications of computer vision

In an age which bears witness to a proliferation of Closed Circuit Television (CCTV) cameras for security and surveillance monitoring, the use of image processing and computer vision techniques which were provided as top end bespoke solutions can now be realised using desktop PC processing. Commercial Video Motion Detection (VMD) and Intelligent Scene Monitoring (ISM) systems are becoming increasingly sophisticated, aided, in no small way, by a technology transfer from previously exclusively military research sectors. Image processing is traditionally concerned with pre-processing operations such as Fourier filtering, edge detection and morphological operations. Computer vision extends the image processing paradigm to include understanding of scene content, tracking and object classification. Examples of computer vision applications include Automatic Number Plate Recognition (ANPR), people and vehicle tracking, crowd analysis and model based vision. Often image processing and computer vision techniques are developed with highly specific applications in mind and the goal of a more global understanding computer vision system remains, at least for now, outside the bounds of present technology. This paper will review some of the most recent developments in computer vision and image processing for challenging outdoor perimeter security applications. It also describes the efforts of development teams to integrate some of these advanced ideas into coherent prototype development systems