延误航班停机坪作业运行控制研究

随着航班航次的增加，机场变得越来越繁忙．地面作业操作不当所导致的飞机地面事故日益增加：在介绍航班停机坪作业的基础上，分析了地面作业的特点，在此基础上，根据航班延误时在作业资源充足和不足情况下，研究了航班停机坪作业的一般方法。在资源充足情况下，航班延误的地面作业控制主要采用AOE方法，缩短关键路线的作业时间。而资源不足情况下，除了控制关键路线作业时间外，还要根据排序算法合理分配关键作业的资源，以实现缩短延误时间的目的。     

论航空公司客户关系管理的发展方向

介绍了客户关系管理（cRM）理论，研究了国内外航空公司发展CRM的历史，并重点分析了国内航空公司在客户关系管理上存在的主要问题和解决方案，最后根据CRM理论阐述了航空公司客户关系管理的发展方向。     

一种金融投资模型的数值逼近方法

对一种金融模型，给出了一、二阶的Itoe-Taylor逼近的估计，并对这两种估计证明了其强收敛性，同时给出了收敛的阶数．通过比较得出Itoe-Taylor逼近阶数越高，得到的估计强收敛的阶越高。     

飞机迎角在垂直阵风干扰中的卡尔曼滤波估计

在阵风条件下,为了抑制飞机的附加载荷并改善乘坐品质,需要得到飞机的迎角状态。以某大型运输机为例,通过卡尔曼滤波方法,将飞机法向过载和俯仰角速度综合进飞机的操纵输入来估计垂直阵风条件下的飞机迎角,并进行了仿真。结果表明,在垂直阵风干扰条件下,采用卡尔曼滤波方法能获得迎角状态的良好估计。     

飞机自动着陆纵向块对角控制器设计

在阐述了块对角控制理论和分析飞机运动特性的基础上,把飞机纵向运动方程转化为块对角非线性系统,并设计了飞机自动着陆纵向块对角控制器。仿真结果表明,该控制器能够控制飞机自动着陆,跟踪性能良好。     

大型运输机机翼弯曲载荷计算

简要叙述了飞机平飞时影响机翼弯曲载荷的主要因素；重点介绍了机翼升力、机翼油箱燃油重力、机翼结构重力沿翼展分布数学模型的建立和机翼弯曲载荷计算公式的推导过程；所述方法虽然是针对大型运输机提出的，但对其它类型飞机同样适用。     

Influence of pre-tension on ballistic impact performance of multi-layer Kevlar 49 woven fabrics for gas turbine engine containment systems

In this paper, ballistic impact tests on wrapped multi-layer Kevlar 49 woven fabric systems were carried out with a flat blade projectile to investigate the impact response during a fan blade out event. The influences of the number of Kevlar layers and pre-tension were discussed particularly. Test results were used to analyze failure modes and energy absorption characteristics of multi-ply Kevlar fabrics. Results show that there are two kinds of impact damage for fabrics: global deformation mainly involving stretching of yarns in the impact region and fabric wrinkle from both sides to the impact zone, and local damage characterized by yarn fracture, yarn pull-out, and yarn unraveling. The energy absorption capability of Kevlar 49 woven fabrics improves with the number of fabric layers. The energy absorbed by multi-layer fabrics increases slightly at the beginning and then decreases substantially with pre-tension. The work in this paper can provide guidance for designing light-weight multi-layer fabrics containment systems.     

基于磁链辨识的无轴承薄片电机轴向振动抑制策略

为了进一步提高BPMSM的悬浮性能,提出了一种基于磁链辨识的BPMSM轴向振动抑制策略,通过转子磁链的变化来估测转子轴向偏移量,然后将轴向偏移量转化为d轴电流分量参考值i*d,通过对i*d的调节来改善薄片转子的轴向恢复力,实现对轴向振动的有效抑制,从而有效改善电机的悬浮性能。试验结果表明:所提出的轴向振动抑制策略能够对薄片转子轴向振动进行有效抑制,提高系统的抗干扰能力,系统的运行性能得到了有效改善。     

Reliable flight performance assessment of multirotor based on interacting multiple model particle filter and health degree

Multirotor has been applied to many military and civilian mission scenarios. From the perspective of reliability, it is difficult to ensure that multirotors do not generate hardware and software failures or performance anomalies during the flight process. These failures and anomalies may result in mission interruptions, crashes, and even threats to the lives and property of human beings. Thus, the study of flight reliability problems of multirotors is conductive to the development of the drone industry and has theoretical significance and engineering value. This paper proposes a reliable flight performance assessment method of multirotors based on an Interacting Multiple Model Particle Filter (IMMPF) algorithm and health degree as the performance indicator. First, the multirotor is modeled by the Stochastic Hybrid System (SHS) model, and the problem of reliable flight performance assessment is formulated. In order to solve the problem, the IMMPF algorithm is presented to estimate the real-time probability distribution of hybrid state of the established SHS-based multirotor model, since it can decrease estimation errors compared with the standard interacting multiple model algorithm based on extended Kalman filter. Then, the reliable flight performance is assessed with health degree based on the estimation result. Finally, a case study of a multirotor suffering from sensor anomalies is presented to validate the effectiveness of the proposed method.     

一种新的基于ANSYS的机翼挠曲变形建模方法

针对传递对准中机翼挠曲变形建模方法适用性差的问题,提出了一种基于有限元分析的不同挂点处弹载子惯导系统的机翼挠曲变形建模方法。以柔性较大的大展弦比机翼为研究对象,建立了薄蒙皮、双翼梁、多肋板式机翼模型。通过绕流分析得到的机翼上、下表面压力分布云图,在此基础上对机翼结构进行气动载荷的加载。根据ANSYS瞬态动力学分析,获取了机翼挠曲变形角的随机过程序列,并利用AR(n)模型代替ARMA(p,q)模型进行建模。采用一种改良卡尔曼滤波算法对模型参数进行估计,并利用信息准则对模型的适应性进行检验。根据参数辨识的结果,最终得到了机翼的挠曲变形模型。