一种整体式天然气压缩机气阀故障诊断技术研究CSCD

整体式天然气压缩机在石油化工领域广泛应用,压缩机的正常工作对安全生产具有重要意义。为了有效诊断整体式压缩机气阀部件的故障,采用了Daubechies小波基函数对ZTY470型整体式天然气压缩机气阀振动信号的分解重构原理,详细介绍了以振动信号的能量为故障特征的故障诊断过程。对气阀阀片断裂和弹簧断裂的故障振动信号进行了小波包分析,并与正常工作时的信号进行了对比。实验表明该方法能准确的进行故障诊断和故障定位,证明了对整体式天然气压缩机气阀故障诊断的有效性。     

Transonic buffet control research with two types of shock control bump based on RAE2822 airfoil

Current research shows that the traditional shock control bump (SCB) can weaken the intensity of shock and better the transonic buffet performance.The author finds that when SCB is placed downstream of the shock,it can decrease the adverse pressure gradient.This may prevent the shock foot separation bubble to merge with the trailing edge separation and finally improve the buffet performance.Based on RAE2822 airfoil,two types of SCB are designed according to the two different mechanisms.By using Reynolds-averaged Navier-Stokes (RANS) and unsteady Reynolds-averaged Navier-Stokes (URANS) methods to analyze the properties of RAE2822 airfoil with and without SCB,the results show that the downstream SCB can better the buffet performance under a wide range of freestream Mach number and the steady aerodynamics characteristic is similar to that of RAE2822 airfoil.The traditional SCB can only weaken the intensity of the shock under the design condition.Under the off-design conditions,the SCB does not do much to or even worsen the buffet performance.Indeed,the use of backward bump can flatten the leeward side of the airfoil,and this is similar to the mechanism that supercritical airfoil can weaken the recompression of shock wave.     

Adaptive suppression of passive intermodulation in digital satellite transceivers

For the performance issues of satellite transceivers suffering passive intermodulation interference,a novel and effective digital suppression algorithm is presented in this paper.In con trast to analog approaches,digital passive intermodulation (PIM) suppression approaches can be easily reconfigured and therefore are highly attractive for future satellite communication systems.A simplified model of nonlinear distortion from passive microwave devices is established in consid eration of the memory effect.The multiple high-order PIM products falling into the receiving band can be described as a bilinear predictor function.A suppression algorithm based on a bilinear poly nomial decorrelated adaptive filter is proposed for baseband digital signal processing.In consideration of the time-varying characteristics of passive intermodulation,this algorithm can achieve the rapidness of online interference estimation and low complexity with less consumption of resources.Numerical simulation results show that the algorithm can effectively compensate the passive intermodulation interference,and achieve a high signal-to-interference ratio gain.     

涡脱落撞击潜入式喷管引起低频压力振荡研究

通过不同障碍高和不同加质的冷流数值模拟,着重研究碰撞频率（碰撞处压力振荡频率）与强度(碰撞处p_rms/p_mean)对于SRM内压力振荡幅频特性的作用程度。研究结果表明,SRM内压力振荡幅度与碰撞处的压力振荡大小为相同量级。当碰撞强度较小时,碰撞只起到增强声场的作用;当碰撞强度较大时,碰撞产生的压力振荡随碰撞强度的增加逐渐覆盖淹没声场。SRM内压力振荡的幅频特性主要由涡脱落碰撞强度决定,一般只呈现低频且具有非声非线性特征。     

消费者创新性对手机银行使用意愿的影响研究

探索消费者创新性对手机银行使用意愿的影响,基于技术接受模型,构建了消费者创新性影响手机银行使用意愿的假设模型,依据假设模型开展了问卷调查。通过AMOS17.0软件对调查数据和假设模型进行了结构方程模型检验。研究结果表明,消费者创新性对手机银行使用意向具有显著影响,其影响机制是通过消费者对手机银行易用性和有用性的感知影响消费者对手机银行的使用态度,进而影响手机银行使用意向。在此基础上对商业银行发展手机银行提出了实践建议。     

基于磁共振线宽的Xe核自旋横向弛豫时间测量方法

随着核磁共振陀螺技术的发展,高精度核磁共振陀螺对原子气室性能提出了更高要求.原子气室内Xe核自旋的横向弛豫时间(T2)是衡量原子气室性能的重要参数之一,T2的常用测量方法为自由感应衰减法(Free Induction Decay,FID).当T2较短时,由于自旋进动信号易受外界干扰,FID方法难以对T2进行精确测量.根据磁共振线宽理论以及自旋进动信号检测技术,针对T2较短的原子气室,提出了基于磁共振线宽的Xe核自旋横向弛豫时间测量方法,构建了测试装置,对Xe核自旋进行了测试.测试结果表明,该测量方法能够有效获得Xe核自旋的横向弛豫时间,克服了FID方法对T2较短的原子气室难以测量的局限性,为检验核磁共振陀螺中原子气室的性能提供了有效测试手段.     

离心叶轮全三维反问题方法设计误差稳定性研究

用流线曲率全三维反问题方法和引入滑移因子模型的准三维流线曲率反问题方法设计了叶片数不同的和增压比不同的小型高速离心叶轮.用商用计算流体力学(CFD)求解器估算了这些叶轮的性能.对比了这两种反问题方法的设计误差稳定性,考察了分流叶片对设计误差的影响.结果表明,流线曲率全三维反问题方法能够根据叶片负荷对叶片设计做出恰当调整.较准三维反问题方法,流线曲率全三维反问题方法所设计叶轮的增压比普遍偏高.随叶片负荷增加,较准三维反问题方法,流线曲率全三维反问题方法的设计误差变化较小,即其设计误差稳定性明显较好.分流叶片对准三维反问题方法设计结果的影响明显较小.      

杨氏双缝干涉光程差近似计算的弱化条件分析

利用平面几何勾股定理,推导出杨氏双缝干涉实验光程差的准确表达式,对光程差表达式进行同解变换,反演了明纹中心坐标与光程差的函数关系,并对明纹中心坐标表达式进行了分析讨论,给出了数值解,得出了 5点结论。结论表明,杨氏双缝干涉实验光程差近似计算的条件可弱化为光程差远小于双缝间距,且利用经典近似方法计算明纹中心坐标在干涉级次较大时误差较大。