扫描辐射计内光路反射镜中SiO2／Ag薄膜系统的失效分析

SiO_2/Ag薄膜系统是扫描辐射计内光路反射镜的主要组成部分。采用高分辨扫描俄歇微探针(SAM)和扫描电镜分析对SiO_2/Ag 薄膜系统失效进行了较为全面的分析研究。通过扫描电镜观察发现,失效的反射镜表面SiO_2薄膜上存在大量析出物,借助于SAM分析,表明这些析出物主要是银和铜,析出物表面伴随有硫化和氧化。SAM的深度剖面结果说明,有析出物存在的区域,各薄膜层中存在原子间的扩散。文章就反射镜中Ag、Cu、和O的扩散和穿透行为进行了讨论,认为SiO_2薄膜致密度较差是导致反射镜失效的主要原因之一。     

编队飞行卫星群构型保持及初始化

导出了基于相对轨道要素的编队飞行卫星群轨道相对运动控制的轨道机动方程；提出了编队飞行卫星群轨道相对运动控制的轨道机动控制策略，利用不同方向的脉冲控制相对运动的轨道参数，包括轨道平面内机动和轨道平面外机动控制。根据相对轨道要素的变轨机动控制，进行编队飞行卫星群构型的初始化。这样的构型初始化可以视作一次特殊的变轨机动控制，很容易实现编队飞行构型的初始化机动。     

计及摩擦时层合板孔内轴销的应力和位移分析

为解决含圆孔层合板在孔内轴销加载下的孔边应力问题，提出一个计及接触摩擦效应的弹性轴销模型，摩擦系数假设为沿接边界按正弦规律变化，在此基础上，采用弹性理论的一般方法，分析了轴销的应力和位移，为有效地解决有载孔层合板孔边应力问题提供了解析基础。     

卫星通信的产业化

回顾了中国发展卫星通信的简要历史，介绍了中国卫星通信的现状和作用。在调查国内用户需求的基础上，预测了１９８８－２００２年国内用户对卫星通信转发器需要的数量。     

研究用现场数据估计系统可靠性参数置信区间

研究用元部件现场信息估计系统可靠性参数,如系统可靠度、可靠寿命等区间估计问题。文中提出了一种新的估计方法——替换百分点法,并运用Monte Carlo数字仿真对估计的置信度和精度进行了分析,研究结果表明此方法具有工程应用价值。     

微量气味成分的自由基簇射技术脱除

研究了密闭体系中微量气味污染物的脱除作用与机理。采用电晕放电自由基簇射技术，实现了人工环境下氧化性自由基的产生；以电子自旋共振技术（ESR）对气态羟基自由基实施了捕集和检测，验证了在羟基自由基的存在下NH3被氧化为N2。通过U—I获得反应能耗和污染物去除效率为：NH3脱除效率为90．6％时，能耗1．0W。研究表明：自由基簇射技术产生的氧化性自由基可有效去除密闭生存环境中产生的NH3等微量有害气味成分，将在空间站等密闭生存系统内空气净化中有很好的应用前景。     

Image restoration of the asymmetric point spread function of a high-resolution remote sensing satellite with time-delayed integration

The calibration and validation team of the Korea Aerospace Research Institute has calibrated and validated the image data of the KOMPSAT-2 since the launch of KOMPSAT-2 on July 28, 2006. The asymmetric phenomenon of the point spread function of the KOMPSAT-2 image data is evident in both the along and the across direction, most likely because KOMPSAT-2 has a 1 m ground sample distance high-resolution camera with time-delayed integration. Furthermore, because KOMPSAT-2 is in space, the KOMPSAT-2 image data has been corrected with good results by means of modulation transfer function compensation.     

Crystal orientation and morphology of a lamellae in wrought titanium alloys: On the role of microstructure evolution in b processing

To obtain high-quality aviation forgings of titanium alloys, b forging is an essential processing step which must be considered throughout a production process. In this work, the effect of b forging on the crystal orientation and morphology of lamellar a was experimentally investigated in a two-phase titanium alloy. Strong dynamic recovery during b working resulted in the formation of low-angle grain boundary(LAGBb) inside b grains. The lamellar a can penetrate through the LAGBb, leading to similar intra a LAGBs on subgrain boundaries. Deformation banding occurs at high strain rates, and both diffusive and sharp boundaries of deformation bands can be observed.A continuous change of the b orientation in diffusive boundaries results in the formation of fine and disordered a lamellae without intra-lamellar boundary to hold the Burgers orientation relationship(OR). On sharp boundaries, it is prone to producing continuous grain boundary a(aGB) with a highly similar orientation along the boundaries. Meanwhile, there may exist several lower-angle boundaries within the grain boundary a for a smoother orientation change on the b grain boundary.     

A comprehensive study of the 2016 Mw 6.0 Italy earthquake based on high-rate (10 Hz) GPS data

The 2016 M_w 6.0 Italy earthquake is successfully recorded by the near-field 10?Hz GPS and 200?Hz Strong Motion (SM) stations, providing valuable data for this study. A comprehensive study of this earthquake is carried out based on GPS data, which contains coseismic deformations analysis, noise analysis, seismic wave picking, and magnitude determination. The noise of most GPS-derived displacement waveforms can be described as a combination of white noise, flicker noise, and random walk noise after the earthquake occurrence, and the spectral indices vary significantly for most stations, implying that the seismic signals have affected the noise characteristic of GPS-derived displacement waveforms. S-transform is employed to assess the GPS capability to detect the seismic arrival time. The SM station AMT and the GPS station AMAT are in good agreement in seismic wave picking, and the difference is only 1.2?s in the north component, suggesting that the outcome of seismic wave picking using GPS data is reliable. Then, a classic empirical formula is employed to determine the moment magnitude. A robust moment magnitude (Mw 5.90) can be estimated by the nine GPS stations with about 23.9?s. If four GPS stations near the epicenter is chosen to determine the magnitude, it only take 13.0?s to retrieve a reliable preliminary (Mw 5.82) magnitude, which is 5.4?s ahead of nine stations. In addition, Cross Wavelet Transform (XWT) is adopted to measuring the correlation and phase relationship between GPS and SM records. The result of XWT analysis indicates 10?Hz GPS is capable of capturing reliable and accurate coseismic dynamic deformations, as evidenced by the XWT-based semblance being close to 1 between GPS and SM records. The above results confirm the capability of 10?Hz GPS to capture coseismic dynamic deformations, detect seismic arrival time, and determine earthquake magnitude. Moreover, rapid magnitude determination based on 10?Hz GPS data can be regarded as an important supplement to Earthquake Early Warning (EEW).     

B65A-S钢动态力学性能及本构模型的研究

为了研究B65A-S钢的动态力学行为,采用Instron液压试验机和分离式霍普金森压杆试验装置,在不同应变率和不同温度条件下对圆柱形试样进行准静态和动态加载试验。试验结果表明,材料的屈服强度与流动应力随着温度升高而降低;在温度一定时,随着应变和应变率的增大,材料的流动应力增高,具有典型的温度软化、应变强化和应变率强化特性。最后基于Jonson-Cook本构模型对试验数据拟合,得到B65A-S钢的Johnson-Cook本构模型参数。