某型飞机刹车失效分析及对策研究

刹车系统是飞机的重要组成部分,是保证飞机滑跑、起飞和着陆的重要装置,其工作可靠性直接影响飞行安全.本文对某型飞机因刹车失效,发生一起与地面停放飞机相擦的飞行事故征候,进行了刹车失效分析和机理研究.同时,按技术问题“五归零”要求,深入开展了多余物产生根源的排查工作,进行了改进研究和试验验证,并制定了对策.     

主动冷却燃烧室燃烧与传热耦合过程迭代分析设计方法

为了对主动冷却超燃冲压发动机进行研究与设计,采用实验与计算相结合的方法,对主动冷却超燃冲压发动机燃烧室内传热与燃烧的耦合过程进行了分析。该方法采用燃烧室静压分布的测量值作为输入条件,开展燃气-结构-燃料耦合传热分析,获得经过冷却系统后燃料的状态参数;将燃料的状态参数作为实验参数,开展直联式超声速燃烧实验,得到新的静压分布,如此反复迭代,直至燃料状态不再变化,最终确定主动冷却燃烧室的各种传热与燃烧特性参数。利用该分析方法,初步开展了不同飞行马赫数条件下主动冷却燃烧室闭环运行状态研究,得到了冷却煤油温度与燃烧室壁温同飞行马赫数的关系。     

直升机机身、平尾、垂尾的气动干扰

运用面元法模拟直升机机身流场,计算前飞状态的ROBIN(rotor body interaction)模型孤立机身顶部中线的压力系数分布,并与参考数据、CFD计算结果对比,验证了本方法的准确性.采用离散涡系模拟平尾、垂尾和短翼等升力面,以带短翼的UH-60直升机为例,研究了升力面参数变化对机身、平尾、垂尾气动干扰的影响.结果表明:改变升力面的安装角显著改变了气流对其周围的绕流情况,在参数中影响最大;平尾参数尤其是安装角会对垂尾和短翼的压力系数产生较大影响;减小垂尾展长和增大短翼安装角会提升各自的压力系数.     

基于人工免疫算法的载人登月任务地月转移双脉冲中止策略研究彭 坤,果琳丽,向开恒,王 平,杨 雷

载人登月任务中,任务中止策略设计是确保航天员安全返回的重要基础。首先结合"星座"计划飞行方案分析了载人登月任务各飞行阶段的中止策略;其次针对地月转移巡航段进行了双脉冲中止策略设计,以速度增量数值、方位角以及变轨时间间隔为控制变量,加入轨道同向、近地点高度、偏心率以及飞行时间约束,提出双脉冲变轨计算流程;最后采用人工免疫算法对该问题进行了求解和优化。仿真算例表明,双脉冲中止策略存在多组解,其全局分布特性为:飞行时间越短速度增量需求越大;飞行时间相近时,大偏心率中止轨道对应的速度增量小;故障点离地月加速点越近,所需速度增量越小。同时也验证了人工免疫算法求解双脉冲中止策略问题的有效性。     

连续尺度变换方程在稳态及非稳态流动模拟中的应用

为了提高涡粘性假设的湍流模型对于非稳态流动的求解精度,同时兼顾其对于稳态流动的求解性能,将雷诺应力项与连续变换方程(CSSE)结合而形成新的应力项,使其根据流场尺度、网格尺度及Kolmogorov尺度来自动调节当地的应力雷诺应力模化水平,避免网格因素在流场模拟中产生不利影响,改正了混合RANS/LES方法的速度型偏离对数率问题;同时,该方法并未引入显式亚格子模型(SGS),因此回避了亚格子系数确定对于流场模拟精度产生的影响,改善了湍流模型对于流动不稳定性的辨识精度。在湍流平板算例中,CSSE方法计算的边界层速度型精度与雷诺平均方法(RANS)相当,而对于圆柱尾迹的模拟则证明了CSSE方法具有混合RANS/LES方法的优点,即能够准确模拟流动的不稳定性特征。     

Coupling damage and reliability model of low-cycle fatigue and high energy impact based on the local stress–strain approach

Fatigue induced products generally bear fatigue loads accompanied by impact processes,which reduces their reliable life rapidly. This paper introduces a reliability assessment model based on a local stress–strain approach considering both low-cycle fatigue and high energy impact loads.Two coupling relationships between fatigue and impact are given with effects of an impact process on fatigue damage and effects of fatigue damage on impact performance. The analysis of the former modifies the fatigue parameters and the Manson–Coffin equation for fatigue life based on material theories. On the other hand, the latter proposes the coupling variables and the difference of fracture toughness caused by accumulative fatigue damage. To form an overall reliability model including both fatigue failure and impact failure, a competing risk model is developed. A case study of an actuator cylinder is given to validate this method.     

Determination of thermal expansion coefficients for unidirectional fiber-reinforced composites

In the present work, the coefficients of thermal expansion（CTEs） of unidirectional（UD）fiber-reinforced composites are studied. First, an attempt is made to propose a model to predict both longitudinal and transverse CTEs of UD composites by means of thermo-elastic mechanics analysis. The proposed model is supposed to be a concentric cylinder with a transversely isotropic fiber embedded in an isotropic matrix, and it is subjected to a uniform temperature change. Then a concise and explicit formula is offered for each CTE. Finally, some finite element（FE） models are created by a finite element program MSC. Patran according to different material systems and fiber volume fractions. In addition, the available experimental data and results of other analytical solutions of CTEs are presented. Comparisons are made among the results of the cylinder model,the finite element method（FEM）, experiments, and other solutions, which show that the predicted CTEs by the new model are in good agreement with the experimental data. In particular, transverse CTEs generally offer better agreements than those predicted by most of other solutions.     

Adaptive Gaussian sum squared-root cubature Kalman filter with split-merge scheme for state estimation

The paper deals with state estimation problem of nonlinear non-Gaussian discrete dynamic systems for improvement of accuracy and consistency. An efficient new algorithm called the adaptive Gaussian-sum square-root cubature Kalman filter（AGSSCKF） with a split-merge scheme is proposed. It is developed based on the squared-root extension of newly introduced cubature Kalman filter（SCKF） and is built within a Gaussian-sum framework. Based on the condition that the probability density functions of process noises and initial state are denoted by a Gaussian sum using optimization method, a bank of SCKF are used as the sub-filters to estimate state of system with the corresponding weights respectively, which is adaptively updated. The new algorithm consists of an adaptive splitting and merging procedure according to a proposed split-decision model based on the nonlinearity degree of measurement. The results of two simulation scenarios（one-dimensional state estimation and bearings-only tracking） show that the proposed filter demonstrates comparable performance to the particle filter with significantly reduced computational cost.     

高空气球太阳能电池标定用太阳跟踪控制技术

高空气球标定的太阳能电池是可被用于地面太阳模拟器和太阳光光强检测的标准电池。首先,给出了由飞行气球搭载的高空太阳能电池标定所使用的太阳跟踪控制系统设计方法,包括基于STM32的太阳跟踪控制系统硬件设计方案、混合自动追踪控制策略、软件开发与实现方法、高空跟踪控制技术问题解决方案以及高空标定试验等。同时,解决了高空气球电池标定用太阳跟踪控制系统在极端环境下高可靠性、连续追踪和防抖动等关键技术问题。试验结果为气球飞行高度32km,平飘时间超过2h,太阳跟踪偏差小于1°。经初步分析,高空太阳跟踪控制系统标定测试结果合理可靠,工作性能稳定,为中国高空气球太阳能电池AM0标定用太阳跟踪控制系统的研究提供了新思路。     

非定常风沙流中风速脉动对沙粒相瞬时浓度影响的实验研究

在大气边界层风洞内采用高速CMOS相机记录了时均风速线性上升的来流条件下运动沙粒的图像。根据二进制图像标记像素的连通性,从数字图像中提取相机拍摄区域内沙粒的数量N,由此计算得到风沙流的瞬时含沙量C。获取图像的同时,使用恒温式热线风速仪MiniCTA配合55R49热膜探头测量观测域上方主流位置和跃移层顶部附近的风速变化。实验结果表明,风沙流中的瞬时含沙量总是非稳定的,其变化频率至少在100Hz以上。风沙之间的相互作用存在一定的滞后效应,大气湍流脉动对含沙量的作用与沙粒粒径相关,粒径越小,风速脉动作用越大。当粒径≤160μm时,风速的微小变化即可引起含沙量的明显波动,二者高度相关。当粒径较大的时候,如300～500μm,只有较长时间较大幅度的风速脉动才能使含沙量有较大幅度的变化,研究时均风速变化对含沙量的影响更具有意义。