Noise analysis of continuous GPS coordinate time series for CMONOC

The Crustal Movement Observation Network of China (CMONOC) is one of the major scientific infrastructures, mainly using Global Positioning System (GPS) measurements, to monitor crustal deformation in the Chinese mainland. In this paper, decade-long coordinate time series of 26 continuous GPS sites of CMONOC are analyzed for their noise content using maximum likelihood estimation (MLE). We study the noise properties of continuous GPS time series of CMONOC for the unfiltered, filtered solutions and also the common mode signals in terms of power law plus white noise model. In the spatial filtering, we remove for every time series a common mode error that was estimated from a modified stacking of position residuals from other sites within ∼1000 km of the selected site. We find that the common mode signal in our network has a combination of spatially correlated flicker noise and a common white noise with large spatial extent. We demonstrate that for the unfiltered solutions of CMONOC continuous GPS sites the main colored noise is a flicker process, with a mean spectral index of ∼1. For the filtered solutions, the main colored noise is a general power law process, indicating that a major number of the filtered regional solutions have a combination of noise sources or local effects. The velocity uncertainties from CMONOC continuous GPS coordinate time series may be underestimated by factors of 8–16 if a pure white noise model is assumed. In addition, using a white plus flicker noise model, the median values of velocity errors for the unfiltered solutions are 0.16 (north), 0.17 (east) and 0.58 (vertical) mm/yr, and the median values for the filtered solutions are 0.09 (north), 0.10 (east) and 0.40 (vertical) mm/yr.     

基于频域分析的ROSAR成像算法

在现有的ROSAR(Synthetic Aperture Radar with Rotating antennas)成像算法中,基于斜距泰勒级数展开的算法存在方位向失配问题,时域相关卷积算法不能快速校正距离弯曲.频域ROSAR成像算法采用驻相点原理,直接对ROSAR回波信号进行二维频域变换,保留回波信号的频谱特征,进而构造相应的频域去耦函数和频域匹配函数,实现频域距离弯曲校正和目标场景重构.仿真结果表明,该算法能够快速校正距离弯曲及有效克服方位向失配问题.     

扭叶片型面在线检测的研究

以汽轮机700mm扭叶片为对象,在XK5040数控机床上,进行了型面误差在线检测的研究。     

卫星轨道保持的一类控制模型

地球赤道静止卫星希望其定点位置固定不变 ;采用轨迹重复的近地轨道的对地遥感卫星 ,需要具有固定的地面轨迹位置 ;如果这类遥感卫星还同时采用太阳同步轨道 ,则还要求降交点地方平太阳时固定不变。上述这三种情况虽然其物理机制各不相同 ,但其变化及控制过程可以抽象出一种共同的模型。文章首先给出这个统一的模型并对其进行讨论 ,然后将结果应用到所述的三种具体情况     

Dynamics and control of spacecraft hovering using the geomagnetic Lorentz force

To achieve hovering, a spacecraft thrusts continuously to induce an equilibrium state at a desired position. Due to the constraints on the quantity of propellant onboard, long-time hovering around low-Earth orbits (LEO) is hardly achievable using traditional chemical propulsion. The Lorentz force, acting on an electrostatically charged spacecraft as it moves through a planetary magnetic field, provides a new propellantless method for orbital maneuvers. This paper investigates the feasibility of using the induced Lorentz force as an auxiliary means of propulsion for spacecraft hovering. Assuming that the Earth’s magnetic field is a dipole that rotates with the Earth, a dynamical model that characterizes the relative motion of Lorentz spacecraft is derived to analyze the required open-loop control acceleration for hovering. Based on this dynamical model, we first present the hovering configurations that could achieve propellantless hovering and the corresponding required specific charge of a Lorentz spacecraft. For other configurations, optimal open-loop control laws that minimize the control energy consumption are designed. Likewise, the optimal trajectories of required specific charge and control acceleration are both presented. The effect of orbital inclination on the expenditure of control energy is also analyzed. Further, we also develop a closed-loop control approach for propellantless hovering. Numerical results prove the validity of proposed control methods for hovering and show that hovering around low-Earth orbits would be achievable if the required specific charge of a Lorentz spacecraft becomes feasible in the future. Typically, hovering radially several kilometers above a target in LEO requires specific charges on the order of 0.1 C/kg.     

基于流固耦合的充气翼内压对翼面变形影响分析

基于ABAQUS-FLUENT软件开展柔性充气翼流固耦合分析,采用反距离加权平均法实现耦合界面气动压力分布传递,采用常体积转换法实现变形数据传递,分析获得了充气翼翼面刚度和屈曲特性与翼面内外压差的关系;建立了充气翼模拟加载试验系统验证了分析方法的可行性.结果表明,流固耦合方法用于充气翼变形分析是可行的,分析结果与模拟试验结果能够较好地吻合.      

大力发展技术市场 迎接知识经济挑战

扼要介绍了知识经济的概念及我国技术市场的状况;分析了技术市场对发展知识经济的重要作用,并就发展和培育技术市场、促进技术创新,提出了建议。     

人员流动风险分析与控制

本文从风险管理的角度研究人员流动问题,给出了人员流动风险的定义和分类,并分别对人员流入风险和人员流出风险的成因进行了分析,最后提出了风险控制策略。     

基于VC＋＋与MapX的导航电子地图的实现

介绍了MapX控件的特点、数据结构及对象模型,根据导航电子地图在导航系统中的重要地位,探讨了如何在Vc＋＋环境下,利用具有强大地图分析功能的MapX控件技术对某地电子地图进行二次开发,实现了以地图为背景显示航路点、期望航迹、真实航迹及导航参数等功能,增强了导航信息的可读性和可视效果。     

BTi6431S钛合金盒形件热拉深成形工艺数值模拟

为研究BTi6431S钛合金热拉深成形工艺,本文以某型号飞行器天线盒盖为例,通过设计正交实验方案,先后分别对无压边情况下拉深成形进行了有限元数值模拟,用最薄壁厚减薄率作为描述零件成形结果的评价标准,得出该钛合金件在成形温度为650°C,首次拉深凹模圆角半径11mm、凸模圆角半径7mm、转角半径12mm、拉深高度25mm参数下,最薄壁厚减薄率最小(20.3%)。