Disturbance observer based model predictive control for accurate atmospheric entry of spacecraft

Facing the complex aerodynamic environment of Mars atmosphere, a composite atmospheric entry trajectory tracking strategy is investigated in this paper. External disturbances, initial states uncertainties and aerodynamic parameters uncertainties are the main problems. The composite strategy is designed to solve these problems and improve the accuracy of Mars atmospheric entry. This strategy includes a model predictive control for optimized trajectory tracking performance, as well as a disturbance observer based feedforward compensation for external disturbances and uncertainties attenuation. 500-run Monte Carlo simulations show that the proposed composite control scheme achieves more precise Mars atmospheric entry (3.8?km parachute deployment point distribution error) than the baseline control scheme (8.4?km) and integral control scheme (5.8?km).     

不锈钢管板小群孔加工技术

分析了不锈钢管板加工的难点,介绍了机床和钻头的选择及优化切削参数,获得较好的技术经济效果.     

Noise analysis of continuous GPS coordinate time series for CMONOC

The Crustal Movement Observation Network of China (CMONOC) is one of the major scientific infrastructures, mainly using Global Positioning System (GPS) measurements, to monitor crustal deformation in the Chinese mainland. In this paper, decade-long coordinate time series of 26 continuous GPS sites of CMONOC are analyzed for their noise content using maximum likelihood estimation (MLE). We study the noise properties of continuous GPS time series of CMONOC for the unfiltered, filtered solutions and also the common mode signals in terms of power law plus white noise model. In the spatial filtering, we remove for every time series a common mode error that was estimated from a modified stacking of position residuals from other sites within ∼1000 km of the selected site. We find that the common mode signal in our network has a combination of spatially correlated flicker noise and a common white noise with large spatial extent. We demonstrate that for the unfiltered solutions of CMONOC continuous GPS sites the main colored noise is a flicker process, with a mean spectral index of ∼1. For the filtered solutions, the main colored noise is a general power law process, indicating that a major number of the filtered regional solutions have a combination of noise sources or local effects. The velocity uncertainties from CMONOC continuous GPS coordinate time series may be underestimated by factors of 8–16 if a pure white noise model is assumed. In addition, using a white plus flicker noise model, the median values of velocity errors for the unfiltered solutions are 0.16 (north), 0.17 (east) and 0.58 (vertical) mm/yr, and the median values for the filtered solutions are 0.09 (north), 0.10 (east) and 0.40 (vertical) mm/yr.     

推力室逆置点火瞬时真空舱流场数值与试验研究

针对高空模拟舱内逆向布置的推力室点火瞬时过程中舱内压力的变化规律进行了理论和数值仿真分析,推力室高速气流的动能是推力室短程点火过程中舱内压力大幅上升的主要原因.为保证推力室点火时舱内的真空度,需要在推力室出口配置导流装置将燃气导出真空舱.对单台和4台并联推力室进行点火试验,试验表明：采用燃气导流能够较好保持舱内真空度,是整机多推力室高空模拟试验的新思路.     

一种用于液晶曝光中的激光检测系统

介绍了一种非接触式激光检测系统，可用于检测液晶曝光中液晶模板与基板之间的间隙，给出了该种系统的测量原理、硬件系统、信号处理方法、测量结果、分辨力和误差分析，并指出了这种测量系统的应用。     

A nonlinear background removal method for seismo-ionospheric anomaly analysis under a complex solar activity scenario: A case study of the M9.0 Tohoku earthquake

A precise determination of ionospheric total electron content (TEC) anomaly variations that are likely associated with large earthquakes as observed by global positioning system (GPS) requires the elimination of the ionospheric effect from irregular solar electromagnetic radiation. In particular, revealing the seismo-ionospheric anomalies when earthquakes occurred during periods of high solar activity is of utmost importance. To overcome this constraint, a multiresolution time series processing technique based on wavelet transform applicable to global ionosphere map (GIM) TEC data was used to remove the nonlinear effect from solar radiation for the earthquake that struck Tohoku, Japan, on 11 March, 2011. As a result, it was found that the extracted TEC have a good correlation with the measured solar extreme ultraviolet flux in 26–34 nm (EUV_26–34) and the 10.7 cm solar radio flux (F_10.7). After removing the influence of solar radiation origin in GIM TEC, the analysis results show that the TEC around the forthcoming epicenter and its conjugate were significantly enhanced in the afternoon period of 8 March 2011, 3 days before the earthquake. The spatial distributions of the TEC anomalous and extreme enhancements indicate that the earthquake preparation process had brought with a TEC anomaly area of size approximately 1650 and 5700 km in the latitudinal and longitudinal directions, respectively.     

有磁场时电子在航天器光电子鞘层中的漂移运动

采用二级漂移近似理论，研究了在航天器光电子鞘层中与电流收集有关的电子在磁场中的运动轨道和收集电子有关的磁瓶结构，结果表明当磁场越强，航天器表面电势越弱，磁瓶在无穷远处横截面积就越小。在光电子鞘层中，势垒对电流收集影响较大，磁瓶的横截面积在略远于垫垒处有极大值，磁瓶在无穷远处的横截面积并非随着势垒距航天器距离的远近而单调变化。     

基于DCT-CS的脉冲星周期超快速估计方法

受快速傅里叶变换（fast Fourier transform，FFT）的影响，基于FFT和压缩感知（compressive sensing, CS）的脉冲星周期快速估计算法的计算量大。为进一步减小计算量并提高计算精度，利用离散余弦变换（discrete cosine transform，DCT)取代FFT，提出了一种基于DCT-CS的脉冲星周期超快速估计算法。在该方法中，利用DCT提取脉冲星信号的低频部分构建低频DCT矩阵；构建畸变轮廓字典并获取累积轮廓；提出了利用最大值超分辨率稀疏恢复估计脉冲星周期的方法。仿真结果表明，DCT-CS的脉冲星周期估计精度达到了3.82×10-12 s，计算时间达到了9.31 ms。与FFT-CS相比，周期估计精度提高了约16%，计算时间缩短了约37.5%，实现了实时高精度的脉冲星周期估计。     

民用运输类飞机最大可用速率抬前轮试飞技术研究

最大可用速率抬前轮试飞是验证抬前轮速度与起飞安全速度的重要依据,也是难度较大、风险较高的试验项目。以起飞动力学分析为基点,得出最大可用速率抬前轮试飞可能达到的最大迎角,并结合相应的适航审定条款,分析了影响该科目试飞的主要因素,给出了最大可用速率抬前轮试飞技术分析和数据处理方法。     

空中乘务专业考生面试技能技巧及注意事项

空中乘务专业与其他非艺术类专业的最大区别在于考生必须参加招生院校组织的专业面试,同时也与航空公司招乘面试有所不同.招生面试是有愿望就读正规院校空中乘务专业学生的必经之路,正确把握、充分准备、良好发挥,有利于在面试中得到好的印象和取得好的效果.