星光折射航天器自主定轨方案比较

当星光透射大气发生折射时 ,用星光折射角精确地反映星光在大气中离地球表面的高度 ,并建立高度、航天器与地球的几何关系。通过对折射角进行观测 ,间接测得地平 ,从而改善了用地平仪直接测地平所造成的航天器自主导航精度低的不足。本文提出了几种利用星光折射的航天器自主定轨方案 ,并作了细致的仿真实验 ,对直接和间接两种测量地平方法以及几种星光折射自主定轨方案进行了分析比较。     

Ariane transfer vehicle in service of man in orbit

The Ariane transfer vehicle (ATV), an Ariane 5 borne, unmanned propulsion vehicle, is designed to transport the logistics needed to resupply the International Space Station (ISS) and the man tended free flyer (MTFF) step 2 with pressurized and unpressurized cargo and to dispose the waste. The ATV is an expendable vehicle and is disposed of by a safe atmospheric burn up. In accordance with the AR5 schedule it should be operational in 1996 for missions toward ISS and beyond the year 2000 for MTFF 2 missions. The main constituents of the proposed ATV are the modified AR5 third stage L5, an upgraded VEB steering the launcher as well as the ATV and the P/L-adaptor providing mechanical and umbilical links to the payload. The mechanical part of the RVD-kit will be placed on the payload-module, the main RVD sensors are located on the adaptor and the needed computer intelligence will be integrated on the VEB. To minimize the development, and recurring costs, the ATV concept fully complies to the idea of maximum use of existing hardware and software, mainly from the AR5, Hermes and Columbus programs thus minimizing development and recurring costs. The ATV is compatible to ISS, MTFF and OMV and is able to transport logistic modules compatible with NSTS and U.S.-expendable launchers.     

防空导弹对机动目标杀伤效果分析

为了分析目标机动对寻的式防空导弹杀伤概率的影响,设计了基于蒙特卡洛试验方法的仿真试验系统。分别建立了基于典型作战飞机和巡航导弹的机动目标仿真模型,建立了基于某型寻的式防空导弹的仿真模型。通过对机动目标进行大量的统计仿真,获得了防空导弹拦截机动目标的全空域杀伤概率。对仿真结果的分析表明,机动目标的航路捷径、机动方式、机动时机是影响寻的式防空导弹拦截效果的主要因素。本文的研究成果可以作为武器系统作战效能评估和战术使用研究的理论依据。     

智能天线结构模糊自适应变形控制实验研究

基于dSPACE半物理仿真系统和所研制的压电作动器,设计并构建了智能天线结构实验平台,进行了结构变形控制实验研究。实验中采用常规PID作为基本控制方法,并在此基础上设计了一种模糊自适应PID控制器,将两种方法对应的不同控制效果进行了对比。结果表明:在所给的实验条件下,基于压电材料可实现对智能天线结构变形的控制,作动器控制变形量最大可达166μm;两种控制方法均可对结构变形进行控制,模糊自适应方法的绝对位置控制精度达到±0.5μm;应用模糊自适应PID控制方法对结构进行变形控制,较之常规PID控制方法能够降低系统响应的超调量,缩短稳定时间,提高控制精度,得到更好的控制过程。     

航天飞行器防热部件烧蚀行为的数值模拟

对航天飞行器防热部件在氧－煤油发动机火焰喷吹下的烧蚀行为进行了有限元数值模拟。利用“杀死”单元的方法建立防热部件瞬态温度场的有限元模型，实现了烧蚀边界的退缩，从而完成了对烧蚀尺寸变化的定量描述。烧蚀开始于4．59s，到12s时线烧蚀量为1．47mm。计算结果与试验的实测结果一致。     

LISA — a study of the ESA cornerstone mission for observing gravitational waves

The primary objective of the Laser Interferometer Space Antenna (LISA) mission is to detect and observe gravitational waves from massive black holes and galactic binaries in the frequency range 10⁻⁴ to 10⁻¹ Hz. This low-frequency range is inaccessible to ground-based interferometers because of the unshieldable background of local gravitational noise and because ground-based interferometers are limited in length to a few km. LISA is an ESA cornerstone mission and recently had a system study (Ref. 1) carried out by a consortium led by Astrium, which confirmed the basic configuration for the payload with only minor changes, and provided detailed concepts for the spacecraft and mission design. The study confirmed the need for a drag-free technology demonstration mission to develop the inertial sensors for LISA, before embarking on the build of the flight sensors. With a technology demonstration flight in 2005, it would be possible to carry out LISA as a joint ESA-NASA mission with a launch by 2010 subject to the funding programmatics. The baseline for LISA is three disc-like spacecraft each of which consist of a science module which carries the laser interferometer payload (two in each science module) and a propulsion module containing an ion drive and the hydrazine thrusters of the AOCS. The propulsion module is used for the transfer from earth escape trajectory provided by the Delta II launch to the operational orbit. Once there the propulsion module is jettisoned to reduce disturbances on the payload. Detailed analysis of thermal and gravitational disturbances, a model of the drag-free control and of the interferometer operation confirm that the strain sensitivity of the interferometer will be achieved.     

按降低轨迹灵敏度综合最优设计飞行控制系统

本文提出了一个按降低轨迹灵敏度综合最优设计飞行控制系统的方法。它能使系统具有满意的动态品质,同时对系统参数的变化及非线性产生的影响具有较强的鲁棒性。该设计方法具有通用性和程序化,系统实现简单。     

基于UKF的航天器最小参数姿态矩阵估计方法

钊对航天器的惯性-星光姿态确定系统，选取基于矢量观测的最小参数姿态矩阵估计方法为定姿算法。但是由于系统模型是非线性的，针对系统模型的非线性，将UKF（Unscented Kalman Filter）与最小参数姿态矩阵估计方法结合，设计了一种针对MEMS陀螺和CMOS APS星敏感器的UKF姿念估计器。仿真结果表明：在敏感器精度较差的情况下，该UKF、姿态估计器能够满足大多数航天器对姿态确定精度的要求。此外，UKF和EKF（Extended Kalman Filter）的仿真对比结果表明：UKF滤波器的收敛速度高于EKF滤波器，状态估计的精度也优于EKF滤波器，且数值稳定性好。     

论提高思想政治理论课教育实效性的学生主体意识

高校思想政治理论课教育最大的问题就是实效性不理想,其原因是多方面的,但主要原因是在教育过程中,忽视了学生的主体意识。论文通过分析高校思想理论课教学过程中存在的忽视学生主体性的问题,提出了通过培养学生主体意识、改革教学方法、拓宽教学形式、注重教学过程中的情感投入等方面的改革,切实提高高校思想政治理论课教育的实效性。     

成像光谱仪编程选择波段数据采集系统的研究

随着成像光谱仪的发展,遥感数据量越来越大,这对电子学系统中的数据采集、传输和处理带来了一定的困难。基于目前技术和数据的实用性两方面考虑,采用编程选择波段的方法能够很好地解决数据量日益增大的问题,国内外的一些方案中已经对此有了一定的设想,即通过遥控指令改变波段数目、光谱取样间隔或波段的重组,这一切都要求有一个灵活性强、通用性好的数据采集系统,能够对不同的选择情况正确地收集用户所需的数据。文中对数据采集的可行性进行了研究,并提出了一个较为容易实现的方案。