采用观测器的偏置动量小卫星姿态容错控制

针对偏置动量小卫星的自主飞行问题,提出一种基于不确定项观测器的滑模容错控制方法。应用欧拉-拉格朗日系统的干扰观测方法设计不确定项观测器,对动量轮输出力矩变小、磁力矩器线圈电阻漂移等执行器故障以及小卫星外部环境力矩等不确定项进行估计,理论推导证明该观测器的观测误差一致最终有界(UUB)。基于不确定项观测器的估计值,设计补偿控制项,并与滑模控制器的控制力矩合成实现姿态容错控制。从理论上证明该容错控制方法能够使小卫星姿态快速收敛至滑模面。该容错方法无需做小角度假设,对执行器运行状态信息依赖性低。仿真结果表明,本文建议的容错控制方法具备可行性,实现了对小卫星姿控系统中不确定项的观测估计和容错控制。     

冗余空间机械臂抓捕自旋卫星后的消旋控制

旨在提出一种运动学冗余空间机器人抓捕自旋卫星后的消旋策略和协调控制方法。首先,给出运动学冗余空间机器人捕获目标后的动力学模型,作为协调控制器设计基础。然后,基于四阶Bézier曲线和满足特定约束的自适应微分进化(Differential Evolution, DE)算法提出抓捕后的最优消旋与路径规划策略,最优消旋策略中同时考虑对消旋时间和控制力矩进行优化。提出一种跟踪所设计参考轨迹的协调控制方法,调整基座的姿态达到期望值。所提方法有效地衰减了自旋卫星的初始角速度,同时实现对基座姿态的控制。文末给出利用7 DOF冗余空间机械臂消除目标自旋运动的仿真结果,表明所提方法的有效性。     

速度信息缺失的平动点轨道交会预设性能控制

以平动点轨道的交会对接为研究背景,基于高阶积分链微分器和预设性能控制理论提出了一种仅需相对位置信息的平动点轨道近程交会控制律。首先利用高阶积分链微分器估计两航天器的相对速度状态,并设计预设性能控制器使得两航天器的相对运动状态在预设的边界内渐近收敛到期望状态。然后利用李雅普诺夫函数证明相对运动状态存在扰动时控制器的稳定性。该方法为闭环控制,且与模型无关,容易在线操作。仿真结果表明,在平动点轨道航天器存在未知扰动以及导航制导等不确定的情况下,利用所提交会控制律能够实现追踪航天器与目标航天器交会任务的高精度实时控制,具有较强鲁棒性。     

火星进入器作强迫震荡运动壁面脉动压力数值模拟

为研究超声速阶段进入器作强迫震荡运动对壁面脉动压力环境的影响规律,本文耦合进入器刚体运动方程与流体力学方程,采用动网格技术,对火星进入器模型开展非定常数值模拟,获取壁面不同位置处的脉动压力信息。研究表明：在超声速阶段,进入器作强迫震荡运动诱导的脉动压力远大于进入器保持相对静止时仅由非定常流动诱导的脉动压力。来流马赫数为1.2时,进入器作强迫震荡运动对脱体激波影响较小,脱体激波强度较弱且形态变化较小,攻角的震荡导致同一测点距离脱体激波的位置发生周期性改变,舱体迎风面及配平翼迎风面的脉动压力环境主要受攻角变化的影响;来流马赫数为3时,进入器作强迫震荡运动对脱体激波的影响较大,脱体激波震荡剧烈,诱导舱体迎风面及配平翼迎风面产生极其恶劣的脉动压力环境,功率谱分析表明激波震荡诱导的脉动压力能量主要集中在30 Hz左右。     

基于室内合作场景智能识别的行人导航算法

基于足绑式惯性测量单元(IMU)的惯性导航系统被广泛应用于行人导航中,其通过零速修正(ZUPT)算法可对速度估计误差进行较好的补偿,然而其位置误差会随时间发散。针对于此,提出了一种基于室内合作场景智能识别的行人导航算法。通过随机森林算法,对行人在室内平地步行、上楼梯、下楼梯等不同步态进行训练与辨识,并结合室内先验地图对行人导航的结果进行校正。通过实验表明,行人在室内行走1100m时最大定位误差为1.85m(总行程0.17%),相对无场景识别的方法精度提高了6倍,可以有效提高行人导航精度。     

航天发射塔回转轴承新型清洗剂研制

航天发射塔回转轴承由于尺寸较大、结构复杂等原因,对其直接进行拆卸保养的难度过大。针对航空煤油等传统轴承清洗液存在清洗不彻底、易燃易爆、人身健康危害等缺点,本文通过对轴承润滑脂的化学成分分析研究,配置出了一种新型清洗液,用于对航天发射塔回转轴承进行清洗。经实验验证,该清洗液具有易于配置、便于存储、除油率高等特点。     

A self-healing strategy with fault-cell reutilization of bio-inspired hardware

The self-healing strategy is a key component in designing the bio-inspired embryonics circuit with the structure of cell arrays. However, the existing self-healing strategies of embryonics circuits mainly focus on permanent faults inside the modules of cells such as the function module and the configuration register, while little attention is paid to transient faults. From the point of view of obtaining high efficiency of hardware utilization, it would be a huge waste of hardware resources by permanent elimination when a cell only suffers a transient fault which can be repaired by a configuration mechanism. A new self-healing strategy, the Fault-Cell Reutilization Self-healing Strategy(FCRSS) which presents a method for reusing transient fault cells, is proposed in this paper. The circuit structures of all the modules in the cells are described in detail. In the new strategy, two processes of elimination and reconfiguration are combined. Within the process of fault-cell elimination, cells with transient faults in the embryonics circuit array could be reused simultaneously to replace the functions of the cells on their left side in the same row. Therefore, transient fault-cells in a transparent state can be reconfigured to realize the fault-cell reutilization. Finally,a circuit simulation, resource consumption, a reliability analysis and a detailed normalization analysis are presented. The FCRSS can improve the hardware utilization rate and system reliability at the expense of a small amount of hardware resources and reconfiguration time. Following the conclusion, the method of determining the optimal self-healing strategy is presented according to the environmental conditions.     

Damage Initiation and Propagation in Composites Subjected to Low-Velocity Impact:Experimental Results,3D Dynamic Damage Model,and FEM Simulations

A three-dimensional dynamic damage model that fits both small and large damage sizes is developed to predict impact damage initiation and propagation for each lamina of T300-carbon/epoxy laminations. First,13 specimens of the same lamination sequence are subjected to three different impact energies(10 J,15 J,and 20 J).After the impact,the laminates are inspected by the naked eye to observe the damage in the outer layers,and subsequently X-rayed to detect the inner damage. Next,the stress analysis of laminates subjected to impact loading is presented,based on the Hertz contact law and virtual displacement principle. Based on the analysis results,a threedimensional dynamic damage model is proposed,including the Hou failure criteria and Camanho stiffness degradation model,to predict the impact damage shape and area. The numerical predictions of the damage shape and area show a relatively reasonable agreement with the experiments. Finally,the impact damage initiation and propagation for each lamina are investigated using this damage model,and the results improve the understanding of the impact process.     

Z源NPC三电平变换器恒功率并网控制策略研究

Z源中点钳位式(NPC)三电平变换器把逆变和升压两种环节结合在一起,结构简单、工作效率高,但是针对这种结构输出的无功功率研究较少。提出了一种Z源NPC三电平变换器的恒功率并网控制策略。首先对这种变换器的结构及原理进行分析;再把恒功率控制引入到这种变换器的并网控制中,并采用空间矢量脉宽调制(SVPWM)实现了变换器的并网控制。MATLAB/Simulink软件仿真结果证明了这种变换器能够提高电压升压比。该控制策略可使变换器输出的有功功率、无功功率稳定于设定值,且并网电流谐波较低。     

间歇采样重复转发对雷达恒虚警检测性能的影响分析

作为一种新型相干干扰,间歇采样转发干扰可以获得雷达脉冲压缩增益,对雷达系统构成了很大的威胁。针对采用线性调频脉冲压缩和单元平均类恒虚警检测的雷达系统,在分析了间歇采样重复转发压制干扰原理和雷达恒虚警检测的工作原理的基础上,理论分析推导了不同间歇采样占空比、转发增益和不同的噪声功率背景条件下重复转发干扰在真实目标CFAR检测区间的能量。通过分析信号能量、噪声能量和干扰能量之间的关系,推导了不同干扰参数下CFAR检测器的信噪比。研究结果表明,在重复全转发这种干扰样式下,采样频率、占空比均是影响影响检测器的重要参数,当优化参数配置,使得转发能量尽量位于检测单元内时,有相对理想的对抗效果。