基于GPS及其与磁强计组合的姿态确定算法研究

提出了一种组合敏感器定姿算法，针对卫星上同时装备有磁强计与全球卫星定位系统（GPS）的情况，利用两者的测量信息，在卡尔曼滤波算法的基础上，对两者信息融合定姿算法进行了设计和仿真，旨在提高卫星自主定姿精度和可靠性，结果表明，组合定姿算法使姿态确定的精度得到提高。     

激波在狭缝中绕射过程研究

针对固体火箭发动机药柱存在裂纹的情况，对运动激波在狭缝中绕射传播的非定常流场进行了计算，得到了清晰的流场变化图谱，从流场图中可分辨出激波在狭缝中的传播过程。对不同深宽比的狭缝进行研究，发现流场结构存在明显差别，在深宽比较小时狭缝内压力波振荡较小，当深宽比超过一定值时狭缝内的压力波产生剧烈振荡。研究结果表明，该方法可很好地描述激波在狭缝中的传播过程。     

翼柱型装药发动机点火升压过程计算

利用实验获得的翼槽内火焰传播规律经验公式,在Ｐ（ｔ）模型的基础上,建立了翼柱型发动机的点火升压计算模型。计算结果与实测数据吻合较好。同时就点火器流量、推进剂燃速、喷管堵盖打开压强等设计参数对发动机点火升压过程的影响进行了分析。     

TETHERED SATELLITE SYSTEM ANALYSIS (1) — TWO-DIMENSIONAL CASE AND REGULAR DYNAMICS

The study on tethered satellite system (TSS) in two-dimensional in-planar motion is restricted in that the tether is assumed to be massless. The equations of motion are given in a spherical coordinate system to describe the magnitude (tether length) and direction angle of the position vector between the satellites. A length rate control algorithm is adopted, and the controlled motion of the directional angle by the algorithm will have a stable equilibrium state. The equilibrium state is a fixed point if the orbit of the base-satellite is circular, and a limit cycle if the orbit is elliptic. The value and stability of the equilibrium state are determined by the parameters of the control algorithm, and the bifurcation analysis is also given. Two typical TSS missions have been simulated.     

基于RBF网络的惯导系统初始对准

建立了惯导系统（ＩＮＳ）初始对准的线性和非线性误差模型。分析了径向基函数（ＲＢＦ）网络的结构和工作原理。研究了ＲＢＦ网代替初始对准中的卡尔曼滤波器的实现方法。通过仿真表明，用神经网络进行初始对准，既可获得与卡尔曼滤波相同的对准精度，又提高了系统的实时性。     

VentureStar… reaping the benefits of the X-33 program

Major X-33 flight hardware has been delivered, and assembly of the vehicle is well underway in anticipation of its flight test program commencing in the summer of 1999. Attention has now turned to the operational VentureStar^TM, the first single-stage-to-orbit (SSTO) reusable launch vehicle. Activities are grouped under two broad categories: (1) vehicle development and (2) market/business planning, each of which is discussed. The mission concept is presented for direct payload delivery to the International Space Station and to low Earth orbit, as well as payload delivery with an upper stage to Geosynchronous Transfer Orbit (GTO) and other high energy orbits. System requirements include flight segment and ground segment. Vehicle system sizing and design status is provided including the application of X-33 traceability and lessons learned. Technology applications to the VentureStar^TM are described including the structure, propellant tanks, thermal protection system, aerodynamics, subsystems, payload bay and propulsion. Developing a market driven low cost launch services system for the 21st Century requires traditional and non-traditional ways of being able to forecast the evolution of the potential market. The challenge is balancing both the technical and financial assumptions of the market. This involves the need to provide a capability to meet market segments that in some cases are very speculative, while at the same time providing the financial community with a credible revenue stream. Furthermore, the market derived requirements need to be assessed so as not to impose unnecessary requirements on the vehicle design that add unreasonable cost to the development of the system, yet provides the right capabilities for new markets that could be triggered by dramatically lower space transportation prices.     

掺磷纳米硅薄膜的微结构

采用喇曼(Raman)散射谱、高分辨率电子显微镜(HRTEM)和原子力显微镜(AFM)对掺磷纳米硅薄膜的微结构进行了分析,并对纳米硅薄膜的传导机制进行了探讨.结果表明:掺磷纳米硅薄膜由尺寸为2～4*#nm的晶粒和2～3个原子层厚的非晶界面构成,计算得到薄膜的晶态比为40%～55%.与本征纳米硅薄膜相比,掺磷纳米硅薄膜晶粒尺寸和晶态比没有明显变化,电导率却提高了2个数量级.随着掺磷浓度增加,纳米硅薄膜的晶粒尺寸、晶态比及电导率逐渐增大.AFM观察表明掺磷纳米硅薄膜由尺寸介于15～20*#nm的团簇构成,团簇排列具有带状特征.     

基于PXI总线的瞄准电子设备虚拟计量检定系统

基于PXI总线和虚拟仪器的设计思想 ,提出了一种新型的瞄准电子设备虚拟计量检定系统的设计方案 ,对系统的硬件组成、检测原理和系统软件进行了论述 ,并对系统的校准问题进行了分析。     

附加准直器的带顶盖静电分析器的数值模拟

对准直器限定视场的带顶盖的1／4球分析器的物理特性分析了数值模拟，相应的模拟程序是在修改裸分析器模拟程序后发展起来的。新程序了准直器引起的分析器结构配置的变化，且被应用于一个带准直器的分析器样本，产生了传输函数和几何因子的模拟结果。     

一种新型的通用计数器的设计

介绍一种以大规模集成电路为核心组成的通用计数器的设计。该通用计数器具有输出标准信号、测量频率、测量周期、累加计数和自校等多种功能。