Performance analysis of variable speed tail rotors with Gurney flaps

Gurney Flaps (GFs) are used for improving the performance of variable speed tail rotors. A validated analytical helicopter model able to predict the main and tail rotor power is utilized. The fixed height GF has substantially small influence on the tail rotor power in hover and low to medium speed forward flight, and can obtain significant power reduction in high speed flight. This ability can be enhanced by decreasing the tail rotor speed. With the deployment of GF, the collective pitch of the tail rotor decreases, and the maximum tail rotor thrust increases. The GF can compensate the reduction of the maximum thrust by the decrease in the tail rotor speed. The GF with a height of 5% of the chord length can almost remedy 50% of the thrust reduction introduced by decreasing 10% of the tail rotor speed. With the increase of GF height, the maximum thrust generated by the tail rotor increases. The GF with larger height can cause the increase in the tail rotor power in hover and low to medium speed flight. The retractable GF can obtain more power savings than the fixed height GF. However, the benefit is substantially small even in high speed flight. Considering the side effects introduced by the active GF, the fixed height GF may be more preferable. The mechanism for the retractable GF to generate more tail rotor thrust is to increase the lift in advancing side due to the higher dynamic pressure.     

SOI工艺抗辐照SRAM型FPGA设计与实现

为提升SRAM型FPGA电路块存储器和配置存储器抗单粒子翻转性能，本文提出一种脉冲屏蔽SRAM单元结构。该结构通过在标准的六管单元中加入延迟结构,增大单元对单粒子事件响应时间，实现对粒子入射产生的脉冲电流屏蔽作用。以64k SRAM作为验证电路进行单粒子翻转性能对比，电路的抗单粒子翻转阈值由采用标准六管单元的抗单粒子翻转阈值大于25 MeV·cm 2·mg -1 提升至大于45 MeV·cm 2·mg -1 ，加固单元面积较标准六管单元增大约21.3%。30万门级抗辐照FPGA电路通过脉冲屏蔽单元结合抗辐照SOI工艺实现，其抗辐照指标分别为：抗单粒子翻转阈值大于37.3 MeV·cm 2·mg -1 ，抗单粒子锁定阈值大于99.8 MeV·cm 2·mg -1 ，抗电离总剂量能力大于200 krad(Si)。     

Design of aircraft structures against threat of bird strikes

In this paper, a method to design bird-strike-resistant aircraft structures is presented and illustrated through examples. The focus is on bird strike experiments and simulations. The explicit finite element software PAM-CRASH is employed to conduct bird strike simulations, and a coupled Smooth Particles Hydrodynamic (SPH) and Finite Element (FE) method is used to simulate the interaction between a bird and a target structure. The SPH method is explained, and an SPH bird model is established. Constitutive models for various structural materials, such as aluminum alloys, composite materials, honeycomb, and foam materials that are used in aircraft structures, are presented, and model parameters are identified by conducting various material tests. Good agreements between simulation results and experimental data suggest that the numerical model is capable of predicting the dynamic responses of various aircraft structures under a bird strike, and numerical simulation can be used as a tool to design bird-strike-resistant aircraft structures.     

基于改进的股票三因子定价模型实证研究

股票的市场溢价一直是金融界学者关注的很有意义的课题。文章将股票价格的跳跃性纳入考虑的范围中,在已知的三因子模型基础上加入价格跳跃性因子(RJV),利用这一改进的三因子定价模型来研究和预测投资组合的股票溢价。文章通过使用汽车和交通运输行业的十五只股票数据建立模型实证研究,由回归分析的显著性结果可知,股票价格的跳跃性与股票溢价之间确实存在一定程度的正相关,改进的股票三因子定价模型具有合理性。但由于不同企业不同行业所受股价跳跃的影响存在差异,因此模型有待改进和完善。     

主被动传感器UT-DC目标定位算法

主被动传感器融合定位具有高度非线性,针对采用传统的线性化方法计算变量统计特性,理论定位结果与实际定位结果相差较大的情况,文章提出了基于不敏变换(UT)的数据压缩(DC)融合定位算法。首先,通过不敏变换精确计算了二维变量的统计特性,减小了非线性误差的影响;其次,针对数据压缩过程中量测信息重复利用的问题进行去相关性处理,获得较高的定位精度;最后,通过理论分析和仿真结果验证,相较于传统的线性化处理方式相差较大的情况,基于不敏变换的数据压缩融合定位方法理论结果与实际结果相吻合。     

民用飞机翼身整流罩区域温度场分析研究及影响

现代民用飞机机身结构大量采用复合材料,但因其遇到高温时会变软,耐热性较差,这就对复合材料周围的环境温度提出了新的要求。以某型飞机的空调组件安装区域进行温度场CFD计算,分析了安装区内的高温部件对机身复合材料结构的影响。为了防止机身复合材料被高温部件烫伤,在高温部件的上方安装隔热板同时进行局部通风冷却,并对相应的工况进行CFD计算对比。     

硅基波导谐振腔特性分析与实验研究

给出了硅基二氧化硅波导谐振腔的整体设计结构和谐振腔的传递函数及考虑光源线宽情况下特征参数的数学表达式。仿真分析了耦合器分光比、波导传输损耗、谐振腔腔长、激光器谱宽对谐振腔特性的影响。研究了硅基二氧化硅波导的加工工艺并针对其关键因素——光刻工艺实验验证了其曝光时间与显影对波导芯片的影响。最后对比了实验测试结果与理论仿真谐振曲线,吻合度良好。     

直升机旋翼黏弹阻尼器时域动力学建模与分析

建立一种适用于旋翼气动弹性分析的黏弹阻尼器模型,该模型考虑了黏弹材料本身的刚度非线性及激振力频率和幅值对黏弹阻尼器应力-应变关系的影响。通过引入新型几何非线性弹簧模块,根据需要调整模型的刚度变化规律,避免了现有黏弹阻尼器模型模拟不同类型材料时因刚度变化规律差异而需重新建模的缺陷,模型适应性强。模型采用多个内变量场,既能体现阻尼器幅变特性,也能准确反映多频激励下的黏弹性特性。以两种不同类型黏弹材料制造的黏弹阻尼器为研究对象,在旋翼黏弹阻尼器的典型工作幅值和频率范围内,进行了简谐实验。利用建立的旋翼黏弹阻尼器非线性时域动力学模型,计算不同类型黏弹材料制造的阻尼器在多种应变幅值、频率下的动态特性并与实验相比较,分析了黏弹阻尼器损耗模量、储能模量频变特性和双频激励对阻尼器的影响。结果表明,建立的非线性黏弹阻尼器动力学模型能够更好地反映不同类型黏弹材料构成的黏弹阻尼器的动刚度和阻尼,适合于直升机旋翼载荷计算和气动弹性分析。