民用直升机脉动总装生产线规划研究

飞机装配日趋向站位式、脉动化总装生产线方向发展。装配分离面的选择对飞机脉动总装生产线建设至关重要。通过分析直升机装配流程特点,探讨直升机结构分离面选择的利弊,研究直升机装配分离面对站位化总装生产线建设的影响,归纳了站位化总装生产线设计的基本原则和方法,为直升机总装生产线建设提供了思路。     

Crystal orientation and morphology of a lamellae in wrought titanium alloys: On the role of microstructure evolution in b processing

To obtain high-quality aviation forgings of titanium alloys, b forging is an essential processing step which must be considered throughout a production process. In this work, the effect of b forging on the crystal orientation and morphology of lamellar a was experimentally investigated in a two-phase titanium alloy. Strong dynamic recovery during b working resulted in the formation of low-angle grain boundary(LAGBb) inside b grains. The lamellar a can penetrate through the LAGBb, leading to similar intra a LAGBs on subgrain boundaries. Deformation banding occurs at high strain rates, and both diffusive and sharp boundaries of deformation bands can be observed.A continuous change of the b orientation in diffusive boundaries results in the formation of fine and disordered a lamellae without intra-lamellar boundary to hold the Burgers orientation relationship(OR). On sharp boundaries, it is prone to producing continuous grain boundary a(aGB) with a highly similar orientation along the boundaries. Meanwhile, there may exist several lower-angle boundaries within the grain boundary a for a smoother orientation change on the b grain boundary.     

双向比对高精度物理时间同步方法

提出一种面向未来卫星在轨应用的闭环物理高精度时间同步方法。比较了所提方法与其他时间同步方法的区别与优势，建立了远程系统时间同步基本模型与误差传递模型，基于双向测距和时间传递技术分析了高精度钟差获取原理，给出了时钟调整环路的时域频域参数依赖关系。完成了高精度时间同步地面试验系统构建，测试了开环非调钟状态下钟差测量精度误差、闭环调钟状态下时间同步准确度误差以及长时运行情况下的时间同步监测结果。测试结果表明，该方法能够实现优于1 ns量级的时间同步，为高精度时间同步技术研究提供了新的途径。     

基于CAN总线的ECU测控软件的设计与实现

设计并实现了一种基于CAN总线的MCS自动测控系统,可以直接获取ECU产品中的核心数据,修改重要参数,并且可以更新ECU程序,为ECU的自主研发提供了检验支持。ECU系统的控制程序使用Ec lipse3.5.2＋w indowbu ilder开发具有友好人机交互界面的MCS主机端平台控制软件,使得数据的显示控制以及解析更加直观简明。实测结果显示,MCS软件的设计与实现减少了ECU国产化的工作量,加快了ECU的研发进程。     

空间激光通信系统中的信道纠错编码技术

由于空间激光通信系统的信道状态和链路捕获跟踪的不确定性,多种形式的信道纠错编码技术正被广泛发展研究。结合空间激光通信链路中误码性能的主要影响因素,分别选择合适的编码方案进行分析。通过仿真实验可知,对于在大气结构参数为1.5×10~(-14) m~(-2/3)、风速为20 m/s的空地激光链路的环境下,在系统数据速率为2 Gbit/s、要求误码率为10~(-6)时,LDPC码结合交织码相对未编码系统有3 dB的等效编码增益,LT码相对未编码系统有3.8 dB的等效编码增益。提供了一种能快速生成、扩展和校验的编码和交织实现方法,以抵抗大气湍流的快速变化对系统性能产生的影响。     

Multi-level virtual prototyping of electromechanical actuation system for more electric aircraft

Electromechanical actuators (EMAs) are becoming increasingly attractive in the field of more electric aircraft because of their outstanding benefits, which include reduced fuel burn and maintenance cost, enhanced system flexibility, and improved management of fault detection and isolation. However, electromechanical actuation raises specific issues when being used for safety-critical aerospace applications like flight controls: huge reflected inertia to load, jamming-type failure, and increase of backlash with service due to wear and local dissipation of heat losses for thermal balance. This study proposes an incremental approach for virtual prototyping of EMAs. It is driven by a model-based system engineering process in order to enable simulation-aided design. Best practices supported by Bond graph formalism are suggested to develop a model’s structure efficiently and to make the model ready for use (or extension) by addressing the above mentioned issues. Physical effects are progressively introduced, and the realism of lumped-parameter models is increased step-by-step. In particular, multi-level component models are architected to ensure continuity between engineering activities. The models are implemented in the AMESim simulation environment, and simulation responses are given to illustrate how they can be used for preliminary sizing, control design, thermal balance verification, and faults to failure analysis. The proposed best practices intend to provide engineers with fast, reusable, and efficient means to assess performance virtually and enhance maturity, performance, and robustness.     

RTK model and positioning performance analysis using Galileo four-frequency observations

This paper proposes a real-time kinematic (RTK) model that uses one common reference satellite for the Galileo system with four frequency observations. In the proposed model, the double-differenced (DD) pseudorange and carrier phase biases among the different frequencies are estimated as unknown parameters to recover the integer features of the DD ambiguities among the different frequencies for ambiguity resolution and precise positioning. Analysis results show that the E5a, E5b, and E5 frequencies have virtually the same performance in terms of the positioning accuracy, observation residuals, and ratio values of ambiguity resolution. However, the E1 frequency performs worse than the E5a, E5b, and E5 frequencies. The RTK results for the combination of multiple frequencies are much better than those for a single-frequency observation, the coordinates’ standard deviation is improved about 20–30%, and the ambiguity fix time is improved about 10%.     

Particle swarm optimization applied to hypersonic reentry trajectories

This paper presents the novel use of the particle swarm optimization(PSO)to generate the end-to-end trajectory for hypersonic reentry vehicles in a quite simple formulation.The velocitydependent bank angle profile is developed to reduce the search space of unknown parameters based on the constrained PSO algorithm.The path constraints are enforced by setting the fitness function to be infinite on condition that the particles violate the maximum allowable values.The PSO algorithm also provides a much easier means to satisfy the terminal conditions by adding penalty terms to the fitness function.Furthermore,the approximate reentry landing footprint is fast constructed by incorporating an interpolation model into the standardized bank angle profiles.Numerical simulations demonstrate that the PSO method is a feasible and flexible tool to generate the end-to-end trajectory and landing footprint for hypersonic reentry vehicles.     

基于单平面双螺旋谐振单元新型左手传输线研究

对基于单平面双螺旋谐振单元的左手传输线进行了研究.对设计的单平面双螺旋单元结构的电磁特性进行仿真并与实际测量结果比较.用散射参数提取算法提取了该结构的折射率和相位常数,提取结果表明上述参数在特定频段同时为负,证明该结构具有左手特性.提出调整螺旋圈数控制传输线电磁特性的方法.通过仿真总结和检验了该参数的调整规律.