High speed driving of a gain-switched laser diode with anexponential transmission line

With the increase of information capacity of an airborne system, high speed driving of laser diodes have been of interest. In order to match the low resistive LD, proposed in this paper is an exponential transmission line, which is used as preshaping to compensate the pattern effect in gain switching of laser diodes. It also will be used to overcome the effect of parasitic elements in high speed driving to improve the rise and trail edges of the output waveform. An accurate circuit model of the exponential line for the PSPICE program has been developed and simulations are conveniently carried out by employing PSPICE     

GPS based onboard and onground orbit operations for small satellites

In extension to common applications such as groundtrack displays and antenna steering, the SGP4 orbit model is proposed for operational orbit determination in small satellite missions. SGP4 is an analytical orbit model for Low-Earth orbiting satellites that is widely used for the propagation of NORAD twoline elements. Twoline elements may hence be generated completely independent of NORAD. Their use as exclusive source of orbital information simplifies the operations concept and reduces mission costs through the extensive use of existing low-cost mission support software. Due to small computer resource requirements of 8–10kByte, the SGP4 model may also be applied for onboard orbit computations making use of e.g. a 80186 processor, thus ensuring full compatibility of ground-based and onboard operations. The proposed approach is particularly suited in combination with a space-borne GPS receiver, were the C/A-code navigation solutions are treated as measurements that are adjusted in a least-squares sense using the SGP4 model. As consequence, inherent drawbacks of the pure navigation solutions such as data gaps and scatter as well as limited velocity accuracy are avoided, while the operational navigation activities are kept at a minimum. The feasibility of the concept is illustrated based on real GPS navigation data from the TOPEX/Poseidon and the MIR space station with an inherent data quality of 50–100 m. It is shown that 3 hours of data within a 4 day period are sufficient to keep the position error within 4 km, that is considered sufficient for most applications.     

电泵起停控制与电机多功能保护电路

某些场合，电泵要在特殊的环境和条件下长期连续的工作，因此配置特殊的起停控制电路和保护电路是完全必要的，所以设计了本文介绍的电泵起停控制与多功能保护电路。电路主要由集成件构成。文中扼要介绍的是电泵欠载延时断电保护，过载分级延时断电保护电路，以及欠载停机后延时自动再起动电路。     

k-ε-g紊流燃烧模型数值研究

本文对k-ε-g紊流燃烧模型中模型系数C_R,C_(g1),C_(g2)的选定和计算浓度脉动均方值g的不同方法进行数值研究。计算结果表明模型系数值的选定直接与化学反应速率有关,而其中C_R影响最大。g的计算虽然可有不同方法,而其中微分方程求解最佳。并用实验数据来验证计算结果。     

碧水青山映古城——雨城雅安

雅安市坐落在四川省中部，位于四川盆地与青藏高原交接带。古为青衣羌国领地，汉代称雅州，名闻遐迩的川藏茶马古道以此为起点翻越莽莽群山逶迤西去，城边的蒙顶山是中国茶化的发祥地，憨态可掬的大熊猫也是从雅安山野里走向世界……此地自古就是多元化的交汇之所，也是地理意义上汉区与藏区和彝区的分水岭，高耸入云的大山将这里切割为迥然而异的化区和自然带，川流不息的青衣江荡涤着这座古风习习的昔日边城。     

星载遥感器在模拟空间环境中辐射定标设备研制

文章简述了星载遥感器辐射定标设备的研制过程及其在模拟空间环境中的调试过程,试验证明了该设备设计的合理性。     

CA6145i型车床噪声检测与降噪处理

通过对新机型CA6145i卧式车床进行噪声攻关试验,得出此型号机床噪声声压级超标,且主轴箱中伴有不规则的杂声。应用频谱分析法找到噪声源,采取相应措施降低或消除噪声,为车床的批量投产奠定基础。     

实验教学遥测系统中的一种码型反变换方法

在遥测系统中有许多种数字信号码型可以使用。在遥测解调分系统中 ,通常采用 NRZL 码作为输出码型 ,这就需要将系统输入的其它码型反变换为 NRZL 码。文中介绍一种在实验教学遥测系统中采用的利用匹配滤波、门限判决、采样、移位、异或的手段来实现码型反变换的方法。     

一种双管双变压器结构的正-反激组合变换器的分析

提出了一种双管双变压器结构的正反激组合变换器。该变换器电路结构简单,控制方便。该双变压器结构减少了单个变压器的原边匝数,从而降低了原边的铜耗,同时也使得低造型设计成为可能。文中着重对两变压器匝比相等和不等两种情况进行了分析比较。在匝比不等情况下,正反激变压器功率分配可灵活设计。最后试验结果验证了理论分析。     

弹道靶红外辐射测量

为深入认识再入物理现象 ,在弹道靶上做了模型头部和近尾流红外辐射测量。发射器为 1 4.5mm口径的二级轻气炮 ,模型为1 0mm的球 ,材料为聚碳酸酯和铝 ,模型发射速度 4～6km/s,使用红外InSb探测器测量波长 3～ 5 .4μm的红外辐射 ,靶室压力 5 .32kPa。实验中使用光电法测量模型速度 ,两站阴影照相进行模型姿态监测和速度核实。实验结果表明 :球模型的红外辐射强度强烈依赖于模型材料和模型飞行速度。对不同材料模型头部和尾流部辐射强度的定性比较说明由于低温材料烧蚀产物的存在 ,极大地增强了头部和近尾流区的辐射强度 ,而且延长了尾流辐射长度