含催化剂RDXCMDB推进剂燃烧机理研究

利用常压ＤＳＣ及ＴＧ／ＤＴＧ，高压ＤＳＣ，单幅照相和燃烧波温度分布测试技术对含ＲＤＸ的复合改性双基推进剂（ＲＤＸＣＭＤＢ）含和不含催化剂时的燃烧机理进行了研究，得到了该种推进剂在热分解和燃烧方面的一些重要结果。     

星光折射航天器自主定轨方案比较

当星光透射大气发生折射时 ,用星光折射角精确地反映星光在大气中离地球表面的高度 ,并建立高度、航天器与地球的几何关系。通过对折射角进行观测 ,间接测得地平 ,从而改善了用地平仪直接测地平所造成的航天器自主导航精度低的不足。本文提出了几种利用星光折射的航天器自主定轨方案 ,并作了细致的仿真实验 ,对直接和间接两种测量地平方法以及几种星光折射自主定轨方案进行了分析比较。     

Ariane transfer vehicle in service of man in orbit

The Ariane transfer vehicle (ATV), an Ariane 5 borne, unmanned propulsion vehicle, is designed to transport the logistics needed to resupply the International Space Station (ISS) and the man tended free flyer (MTFF) step 2 with pressurized and unpressurized cargo and to dispose the waste. The ATV is an expendable vehicle and is disposed of by a safe atmospheric burn up. In accordance with the AR5 schedule it should be operational in 1996 for missions toward ISS and beyond the year 2000 for MTFF 2 missions. The main constituents of the proposed ATV are the modified AR5 third stage L5, an upgraded VEB steering the launcher as well as the ATV and the P/L-adaptor providing mechanical and umbilical links to the payload. The mechanical part of the RVD-kit will be placed on the payload-module, the main RVD sensors are located on the adaptor and the needed computer intelligence will be integrated on the VEB. To minimize the development, and recurring costs, the ATV concept fully complies to the idea of maximum use of existing hardware and software, mainly from the AR5, Hermes and Columbus programs thus minimizing development and recurring costs. The ATV is compatible to ISS, MTFF and OMV and is able to transport logistic modules compatible with NSTS and U.S.-expendable launchers.     

加扰流环双组元LAE的流场数值仿真

采用交错网格系统SIMPLE算法和二维两相流场燃烧模型，对有不同形状(矩形、圆弧三角形及其混合结构)和位置扰流环的某双组元液体远地点发动机(LAE)流场进行了数值仿真计算。结果表明，扰流环对提高燃烧效率作用明显。环的位置应适中(不能过于靠近头部和喷管出口处)，其高度越大，燃烧效率越高。另外，矩形环的压力损失大于三角形环。     

航天飞行器防热部件烧蚀行为的数值模拟

对航天飞行器防热部件在氧－煤油发动机火焰喷吹下的烧蚀行为进行了有限元数值模拟。利用“杀死”单元的方法建立防热部件瞬态温度场的有限元模型，实现了烧蚀边界的退缩，从而完成了对烧蚀尺寸变化的定量描述。烧蚀开始于4．59s，到12s时线烧蚀量为1．47mm。计算结果与试验的实测结果一致。     

LISA — a study of the ESA cornerstone mission for observing gravitational waves

The primary objective of the Laser Interferometer Space Antenna (LISA) mission is to detect and observe gravitational waves from massive black holes and galactic binaries in the frequency range 10⁻⁴ to 10⁻¹ Hz. This low-frequency range is inaccessible to ground-based interferometers because of the unshieldable background of local gravitational noise and because ground-based interferometers are limited in length to a few km. LISA is an ESA cornerstone mission and recently had a system study (Ref. 1) carried out by a consortium led by Astrium, which confirmed the basic configuration for the payload with only minor changes, and provided detailed concepts for the spacecraft and mission design. The study confirmed the need for a drag-free technology demonstration mission to develop the inertial sensors for LISA, before embarking on the build of the flight sensors. With a technology demonstration flight in 2005, it would be possible to carry out LISA as a joint ESA-NASA mission with a launch by 2010 subject to the funding programmatics. The baseline for LISA is three disc-like spacecraft each of which consist of a science module which carries the laser interferometer payload (two in each science module) and a propulsion module containing an ion drive and the hydrazine thrusters of the AOCS. The propulsion module is used for the transfer from earth escape trajectory provided by the Delta II launch to the operational orbit. Once there the propulsion module is jettisoned to reduce disturbances on the payload. Detailed analysis of thermal and gravitational disturbances, a model of the drag-free control and of the interferometer operation confirm that the strain sensitivity of the interferometer will be achieved.     

按降低轨迹灵敏度综合最优设计飞行控制系统

本文提出了一个按降低轨迹灵敏度综合最优设计飞行控制系统的方法。它能使系统具有满意的动态品质,同时对系统参数的变化及非线性产生的影响具有较强的鲁棒性。该设计方法具有通用性和程序化,系统实现简单。     

利用超导磁体模拟失重环境

介绍了利用超导磁体产生的强磁场获得的失重环境及在此基础上的一些相关科学研究。超导磁体产生的大梯度强磁场可在地面长时间的模拟失重环境,为在地面进行空间科学研究提供了一个可选择的途径。实践证明,利用超导磁体产生强磁场模拟失重环境是一种值得重视的新技术。     

基于偏差信息的星载计算机系统负载平衡算法的研究

相邻结点负载平衡算法具有计算简单、额外开销小的优点。但由于采用局部的观点平衡负载，限制了结点信息得到的范围，使得系统在某种情况下达不到全局平衡，本文提出了基于偏差信息的星载计算机系统负载平衡算法，它改变了结点传递的实际负载信息，使修改后的负载信息能体现出结点及其周边结点的负载形势，以此弥补了相邻结点负载平衡算法的不足，并将其应用在星载计算机系统上，首先，介绍了相邻结点负载平衡算法及其存在的不足；其次，描述了基于偏差信息的星载计算机系统负载平衡算法，最后，通过仿真实验，给出了这种算法同其它几种负载平衡算法的比较，并证明了它的正确性与可行性。     

惯性导航/双星组合导航的可行性研究

根据国外惯性导航／卫星组合的研究、发展和应用情况，分析了惯性导航／双星组合的必要性和可实现性；提出了惯性导航／双星组合中存在的主要问题和可能的对策。研究结果表明，惯性导航系统(INS)和双星定位系统的组合是完全必要和可行的；惯性导航／双星组合系统的性能比纯惯性导航有明显提高。