应用泰勒中值定理研究函数的方法总结

本文讨论了应用泰勒中值定理研究函数时，如何合理选择展开点的问题，概括了以下三种方法。1、选择已知条件最多的点展开。2、选择问题所要讨论的点展开。3、选择极值点处展开。     

我国月面巡视探测器定位方法研究

月球自动巡视勘查技术中的月面巡视探测器的导航控制,需要研究月面巡视探测器的定位技术。文章通过对国外漫游车定位方法的研究,提出了我国月面巡视探测器在全局坐标系和局部坐标系中进行定位的方法。月面巡视探测器在全局坐标系中的定位可以采用星敏感器以及陆标辨识的方式;局部坐标系的定位可以采用惯性导航系统 里程计以及着陆器帮助下定位和视觉里程计的定位方法。这几种定位方式的组合应用,能够满足月面巡视探测器导航方面的定位要求。     

星光折射航天器自主定轨方案比较

当星光透射大气发生折射时 ,用星光折射角精确地反映星光在大气中离地球表面的高度 ,并建立高度、航天器与地球的几何关系。通过对折射角进行观测 ,间接测得地平 ,从而改善了用地平仪直接测地平所造成的航天器自主导航精度低的不足。本文提出了几种利用星光折射的航天器自主定轨方案 ,并作了细致的仿真实验 ,对直接和间接两种测量地平方法以及几种星光折射自主定轨方案进行了分析比较。     

Ariane transfer vehicle in service of man in orbit

The Ariane transfer vehicle (ATV), an Ariane 5 borne, unmanned propulsion vehicle, is designed to transport the logistics needed to resupply the International Space Station (ISS) and the man tended free flyer (MTFF) step 2 with pressurized and unpressurized cargo and to dispose the waste. The ATV is an expendable vehicle and is disposed of by a safe atmospheric burn up. In accordance with the AR5 schedule it should be operational in 1996 for missions toward ISS and beyond the year 2000 for MTFF 2 missions. The main constituents of the proposed ATV are the modified AR5 third stage L5, an upgraded VEB steering the launcher as well as the ATV and the P/L-adaptor providing mechanical and umbilical links to the payload. The mechanical part of the RVD-kit will be placed on the payload-module, the main RVD sensors are located on the adaptor and the needed computer intelligence will be integrated on the VEB. To minimize the development, and recurring costs, the ATV concept fully complies to the idea of maximum use of existing hardware and software, mainly from the AR5, Hermes and Columbus programs thus minimizing development and recurring costs. The ATV is compatible to ISS, MTFF and OMV and is able to transport logistic modules compatible with NSTS and U.S.-expendable launchers.     

航天飞行器防热部件烧蚀行为的数值模拟

对航天飞行器防热部件在氧－煤油发动机火焰喷吹下的烧蚀行为进行了有限元数值模拟。利用“杀死”单元的方法建立防热部件瞬态温度场的有限元模型，实现了烧蚀边界的退缩，从而完成了对烧蚀尺寸变化的定量描述。烧蚀开始于4．59s，到12s时线烧蚀量为1．47mm。计算结果与试验的实测结果一致。     

LISA — a study of the ESA cornerstone mission for observing gravitational waves

The primary objective of the Laser Interferometer Space Antenna (LISA) mission is to detect and observe gravitational waves from massive black holes and galactic binaries in the frequency range 10⁻⁴ to 10⁻¹ Hz. This low-frequency range is inaccessible to ground-based interferometers because of the unshieldable background of local gravitational noise and because ground-based interferometers are limited in length to a few km. LISA is an ESA cornerstone mission and recently had a system study (Ref. 1) carried out by a consortium led by Astrium, which confirmed the basic configuration for the payload with only minor changes, and provided detailed concepts for the spacecraft and mission design. The study confirmed the need for a drag-free technology demonstration mission to develop the inertial sensors for LISA, before embarking on the build of the flight sensors. With a technology demonstration flight in 2005, it would be possible to carry out LISA as a joint ESA-NASA mission with a launch by 2010 subject to the funding programmatics. The baseline for LISA is three disc-like spacecraft each of which consist of a science module which carries the laser interferometer payload (two in each science module) and a propulsion module containing an ion drive and the hydrazine thrusters of the AOCS. The propulsion module is used for the transfer from earth escape trajectory provided by the Delta II launch to the operational orbit. Once there the propulsion module is jettisoned to reduce disturbances on the payload. Detailed analysis of thermal and gravitational disturbances, a model of the drag-free control and of the interferometer operation confirm that the strain sensitivity of the interferometer will be achieved.     

按降低轨迹灵敏度综合最优设计飞行控制系统

本文提出了一个按降低轨迹灵敏度综合最优设计飞行控制系统的方法。它能使系统具有满意的动态品质,同时对系统参数的变化及非线性产生的影响具有较强的鲁棒性。该设计方法具有通用性和程序化,系统实现简单。     

国外几种新型微化学推力器

介绍了国外几种以微机电系统 (MEMS)技术为基础的液体和固体微化学推力器。这些新型微化学推力器具有MEMS技术微型化、低成本和批量生产的优点 ,并考虑了体积限制和高度集成等空间限制 ,能产生 10 -6～ 10N·s的推力脉冲 ,可用于微型卫星和纳米卫星的姿态调整、变轨和定向的精确控制。同时阐述了这几种微推力器结构特点和制造工艺 ,并与其他类型的推进器进行了比较     

基于3D Zernike矩的三维地形匹配算法及性能分析

提出了一种基于面特征的三维地形匹配算法。在算法中,与三维地形具有一一对应关系的3D Zernike矩用来描述参考高程图(DEM)和恢复地形高程图(REM),三维地形匹配转化为基于3D Zernike矩的特征向量匹配。匹配按先粗后精两步进行,在粗匹配中,匹配窗口滑动步长设定为5个象素,采用较低阶数的3D Zernike矩。在精匹配中,只对3个最优粗匹配位置的邻近区域进行精匹配,匹配窗口滑动步长为1个象素,采用较高阶数的3DZernike矩。两块地形的相似度以它们的3D Zernike矩间Camberra距离来度量,距离越小越相似,反之亦然。本算法属于特征面匹配,相对于基于特征点和特征线的地形匹配,理论和实验证明该算法具有更高的匹配概率、匹配精度和更强的抗噪声能力。     

基于iSIGHT的磁悬浮反作用飞轮优化设计

针对一种额定角动量为15Nms的磁悬浮反作用飞轮,分析了系统的控制模型,得知若飞轮转子质心位于上下径向磁轴承几何对称中心,可以减少控制参数的耦合,简化控制器设计。基于此分析结论,以优化设计软件iSIGHT为平台,对15Nms的磁悬浮反作用飞轮进行了多学科优化设计方法研究,改进了原有的优化设计方法,设计结果表明:在保证多约束条件下使转子质量达到最小,同时降低控制系统调试和检测的难度。此优化方法进一步提高了飞轮的设计和调试效率,有助于实现系统的高精度控制。