基于PLIF技术的航空煤油横向射流穿透深度研究

为了研究动量比、韦伯数对射流穿透深度的影响,利用激光诱导荧光(PLIF)技术对航空煤油的穿透特性进行了试验。液态航空煤油通过直径为0.5mm的直射式喷嘴喷射入横向气流,Nd:YAG激光器产生266nm激光用于激发煤油诱导荧光。试验空气压力范围为0.3~0.6MPa,温度358K,动量比范围为10~40,韦伯数范围为170~340。试验结果表明:不同压力下,穿透深度随动量比增加而增加;在本文的工况范围下,韦伯数对射流穿透深度无显著影响。通过对试验数据的分析处理,获得了射流穿透深度关于动量比、韦伯数和轴向距离的经验关系式。     

民用飞机初始备件计划研究及系统软件实现

国内民用航空制造业如今正在加速发展，而相应的备件工程与波音、空客都还是有一定的差距。结合ARJ21飞机项目研究了民用飞机初始备件计划模型，并在此基础上开发了备件计划软件系统，完成了初始备件计划工作的计算机化。     

肋开孔高度对大宽高比矩形通道流动传热的影响

为了获得大宽高比矩形通道内开孔肋的流动与传热特性,采用数值模拟的方法在开孔肋的肋高e/Dh=0.188、开孔率β=0.131时研究了通道的摩擦系数、努塞尔数等参数随孔排高度和雷诺数的变化规律。结果表明:与实体肋相比,开孔肋能够减小通道的摩擦系数并提高其壁面温度分布的均匀性,但是传热增强因子有所减小;随着孔排高度的提升,通道的摩擦系数单调减小,壁面温度分布的不均匀度增大,而传热增强因子则先增大后减小,因此存在一最优孔排高度(h/e)opt=0.65使开孔肋的强化传热综合指标达到最大值;随着雷诺数的增大,开孔肋通道的摩擦系数缓慢减小、换热逐渐增强,这与实体肋的变化规律是类似的。     

海洋平台在组合载荷作用下的随机域可靠性分析

本文对海洋平台在风、浪及海流等多种载荷组合作用下的可靠性进行了分析计算,采用优选随机载单元法进行结构数的随机域离散。文中的海洋平台算例结构表明了优选随机域单元法的高效性,以及在海洋工程的结构系统可靠性计算中的考虑载荷组合作用的必要性。     

编队飞行卫星轨道的初步设计研究

使用两体相对运动的Hill方程进行小卫星编队飞行队形的初步设计，给出了编队飞行中各绕飞小卫星的轨道要素确定过程。以空间圆形编队为例，在未考虑摄动的情况下，通过仿真验证了设计的有效性。     

基于PXI总线的瞄准电子设备虚拟计量检定系统

基于PXI总线和虚拟仪器的设计思想 ,提出了一种新型的瞄准电子设备虚拟计量检定系统的设计方案 ,对系统的硬件组成、检测原理和系统软件进行了论述 ,并对系统的校准问题进行了分析。     

Dynamics and structure of ion clouds in the ionosphere from multifrequency doppler sounding

The evolution of a barium ion cloud formed in the MR-20 rocket experiment in the low-latitude ionosphere is considered using data of Doppler multifrequency sounding.     

The impact of alternative mission models on the future orbital debris environment

In reviewing discussions of future directions for space activity, it becomes obvious that there are a large number of groups formulating a wide diversity of plans for the future use of space. These plan alternatives are being made to account for user needs, technology development constraints, economic constraints, and launch support, and each of the plans will have direct or indirect effects on the orbital debris environment in terms of mass to orbit, deposition of operational debris, and control of accidental breakups. Thus it is important to develop the ability to project future debris states for a range of possible space traffic scenarios. The impact that these possible traffic environments would have on space operations forms the basis for studies of alternative options for the usage of space. In this paper, the effects on the orbital debris environment of a base-line mission model and two alternatives are investigated, using a numerical debris environment simulation code under development at JSC.     

Measurements of electrical breakdown in the vicinity of a sounding rocket differentially charged to 10 kV

During the initial period of high voltage biasing of the SPEAR-3 sounding rocket payload, it was observed that electrical breakdown occurred in the gas surrounding the rocket. The breakdown occurred almost all the way to apogee of 289 km on the upleg, but did not recur on the downleg until the payload reached an altitude of 100 km. It is suggested that this behavior can be attributed to payload outgassing on the upleg leading to abnormally high gas pressure near the payload skin. Consideration of a modified Paschen discharge process with varying pressure along the discharge path was found to be consistent with the results.