星光折射航天器自主定轨方案比较

当星光透射大气发生折射时 ,用星光折射角精确地反映星光在大气中离地球表面的高度 ,并建立高度、航天器与地球的几何关系。通过对折射角进行观测 ,间接测得地平 ,从而改善了用地平仪直接测地平所造成的航天器自主导航精度低的不足。本文提出了几种利用星光折射的航天器自主定轨方案 ,并作了细致的仿真实验 ,对直接和间接两种测量地平方法以及几种星光折射自主定轨方案进行了分析比较。     

Ariane transfer vehicle in service of man in orbit

The Ariane transfer vehicle (ATV), an Ariane 5 borne, unmanned propulsion vehicle, is designed to transport the logistics needed to resupply the International Space Station (ISS) and the man tended free flyer (MTFF) step 2 with pressurized and unpressurized cargo and to dispose the waste. The ATV is an expendable vehicle and is disposed of by a safe atmospheric burn up. In accordance with the AR5 schedule it should be operational in 1996 for missions toward ISS and beyond the year 2000 for MTFF 2 missions. The main constituents of the proposed ATV are the modified AR5 third stage L5, an upgraded VEB steering the launcher as well as the ATV and the P/L-adaptor providing mechanical and umbilical links to the payload. The mechanical part of the RVD-kit will be placed on the payload-module, the main RVD sensors are located on the adaptor and the needed computer intelligence will be integrated on the VEB. To minimize the development, and recurring costs, the ATV concept fully complies to the idea of maximum use of existing hardware and software, mainly from the AR5, Hermes and Columbus programs thus minimizing development and recurring costs. The ATV is compatible to ISS, MTFF and OMV and is able to transport logistic modules compatible with NSTS and U.S.-expendable launchers.     

对某距离自动跟踪系统测距误差的分析

根据某距离自动跟踪系统设计的实际情况，分析了系统中模拟数字（ＡＤ）转换电路、动目标显示（ＭＴＩ）与求模运算、波形分析和α－β滤波器所引入的测距误差，得出ＡＤ采样率和波形分析的内插点数决定了系统引入测距误差大小的结论。对实际工作参数的计算及校飞试验的结果证明，此距离自动跟踪系统引入的测距误差较小，满足雷达系统的要求。     

航天飞行器防热部件烧蚀行为的数值模拟

对航天飞行器防热部件在氧－煤油发动机火焰喷吹下的烧蚀行为进行了有限元数值模拟。利用“杀死”单元的方法建立防热部件瞬态温度场的有限元模型，实现了烧蚀边界的退缩，从而完成了对烧蚀尺寸变化的定量描述。烧蚀开始于4．59s，到12s时线烧蚀量为1．47mm。计算结果与试验的实测结果一致。     

LISA — a study of the ESA cornerstone mission for observing gravitational waves

The primary objective of the Laser Interferometer Space Antenna (LISA) mission is to detect and observe gravitational waves from massive black holes and galactic binaries in the frequency range 10⁻⁴ to 10⁻¹ Hz. This low-frequency range is inaccessible to ground-based interferometers because of the unshieldable background of local gravitational noise and because ground-based interferometers are limited in length to a few km. LISA is an ESA cornerstone mission and recently had a system study (Ref. 1) carried out by a consortium led by Astrium, which confirmed the basic configuration for the payload with only minor changes, and provided detailed concepts for the spacecraft and mission design. The study confirmed the need for a drag-free technology demonstration mission to develop the inertial sensors for LISA, before embarking on the build of the flight sensors. With a technology demonstration flight in 2005, it would be possible to carry out LISA as a joint ESA-NASA mission with a launch by 2010 subject to the funding programmatics. The baseline for LISA is three disc-like spacecraft each of which consist of a science module which carries the laser interferometer payload (two in each science module) and a propulsion module containing an ion drive and the hydrazine thrusters of the AOCS. The propulsion module is used for the transfer from earth escape trajectory provided by the Delta II launch to the operational orbit. Once there the propulsion module is jettisoned to reduce disturbances on the payload. Detailed analysis of thermal and gravitational disturbances, a model of the drag-free control and of the interferometer operation confirm that the strain sensitivity of the interferometer will be achieved.     

按降低轨迹灵敏度综合最优设计飞行控制系统

本文提出了一个按降低轨迹灵敏度综合最优设计飞行控制系统的方法。它能使系统具有满意的动态品质,同时对系统参数的变化及非线性产生的影响具有较强的鲁棒性。该设计方法具有通用性和程序化,系统实现简单。     

多体分离抛撒初条件与分离特征参数

多次风洞自由飞多体分离抛撒实验均证实了被抛撒物运动初条件对抛离成功与否有决定性影响;为此可采取"戴帽"措施;但数值计算结果与此相反,因而需深入开展研究,解决问题。常规形式的风洞测力方法,无法模拟各分离体之间很大的相对速度。分离过程中"特征时间"是很小的,因而风洞实验以及数值计算必须计及非常小的"特征时间"所反映的非定常气动力。多体分离的实践表明,至少在快速分离过程中运动动力学相似是必需的。     

Ada语言在星载软件上的应用

介绍了星载软件的特点和构成，从提高星载软件可靠性的角度引入了高级程序设计语言－Ada语言与汇编语言的接口调用技术，以及使用Ada 语言开发星载软件和应用技术。     

红外遥感器空间制冷技术的发展现状

红外遥感技术发展的关键技术之一是解决其红外器件的制冷问题。文中通过对空间用制冷技术的分析,探讨了辐射制冷器、斯特林制冷机、脉冲管制冷器在空间中的应用和发展方向。     

基于模糊集理论的航天器测控任务评估

为了全面评价航天器测控任务完成质量，提出了其质量评估采用模糊综合评价法的思想；其次对评估的主要因素进行了深入的分析，利用测量数据的离散性，较为成功地解决了评估矩阵R的生成问题，初步建立了模糊评估的指标体系，确定了各指标的权重以及综合评估的计算方法，应用效果良好；最后结合实际应用情况，强调被测对象和环境因素对评估结果也有一定的影响，同时评估应与决策有机相结合。