不同风速下海洋粗糙面散射系数的计算

在考虑风速的条件下,计算了海洋粗糙面的散射特性。用矩量法(MOM)计算了一维介质海洋粗糙面在Durden-Vesecky功率谱下的散射系数,由此获得了一定风速时的双站散射系数。仿真结果表明,计算值与文献数据非常吻合。由计算的不同风速下双站散射系数可知,风速对海洋粗糙面散射特性的影响较大。在一定的海拔高度上,散射角相同(除后向散射方向外)时,风速越大,散射就越强。     

碳纤维复合材料高压球形容器研制

采用变带距方法对球形容器进行优化设计，并研制了一批产品。试验结果表明，在纤维设计应力相同条件下，采用变带距缠绕的球形容器，其复合材料重量比等带距缠绕的轻２４．５６％，而其容器特性系数高出１０．４％，能同时满足设计提出的强度和重量两方面要求。     

三维热化学非平衡流动非结构网格DSMC方法及其应用

研究了过渡流域三维热化学非平衡流动DSMC方法实现的过程.以四面体非结构网格为基本单元,提出一种新型的高效搜索算法,该算法不仅可以快速跟踪模拟分子在网格之间的迁移,而且可以准确判别分子与物面是否相互作用,避免了原有算法中分子表面反射的非确定论判据.设计了适合三维DSMC方法的动态局部时间步长技术,节约了计算时间.将碰撞距离的思想引入到非结构网格上来,有效地消除了网格尺度小于三分之一平均自由程的限制.利用Foaran90的动态分配内存技术编制了适用于任意外形的通用计算程序.最后对全尺寸航天飞机高超声速绕流进行了数值试验,计算结果验证了该算法的可行性及高效性.     

激波在狭缝中绕射过程研究

针对固体火箭发动机药柱存在裂纹的情况，对运动激波在狭缝中绕射传播的非定常流场进行了计算，得到了清晰的流场变化图谱，从流场图中可分辨出激波在狭缝中的传播过程。对不同深宽比的狭缝进行研究，发现流场结构存在明显差别，在深宽比较小时狭缝内压力波振荡较小，当深宽比超过一定值时狭缝内的压力波产生剧烈振荡。研究结果表明，该方法可很好地描述激波在狭缝中的传播过程。     

基于RBF网络的惯导系统初始对准

建立了惯导系统（ＩＮＳ）初始对准的线性和非线性误差模型。分析了径向基函数（ＲＢＦ）网络的结构和工作原理。研究了ＲＢＦ网代替初始对准中的卡尔曼滤波器的实现方法。通过仿真表明，用神经网络进行初始对准，既可获得与卡尔曼滤波相同的对准精度，又提高了系统的实时性。     

VentureStar… reaping the benefits of the X-33 program

Major X-33 flight hardware has been delivered, and assembly of the vehicle is well underway in anticipation of its flight test program commencing in the summer of 1999. Attention has now turned to the operational VentureStar^TM, the first single-stage-to-orbit (SSTO) reusable launch vehicle. Activities are grouped under two broad categories: (1) vehicle development and (2) market/business planning, each of which is discussed. The mission concept is presented for direct payload delivery to the International Space Station and to low Earth orbit, as well as payload delivery with an upper stage to Geosynchronous Transfer Orbit (GTO) and other high energy orbits. System requirements include flight segment and ground segment. Vehicle system sizing and design status is provided including the application of X-33 traceability and lessons learned. Technology applications to the VentureStar^TM are described including the structure, propellant tanks, thermal protection system, aerodynamics, subsystems, payload bay and propulsion. Developing a market driven low cost launch services system for the 21st Century requires traditional and non-traditional ways of being able to forecast the evolution of the potential market. The challenge is balancing both the technical and financial assumptions of the market. This involves the need to provide a capability to meet market segments that in some cases are very speculative, while at the same time providing the financial community with a credible revenue stream. Furthermore, the market derived requirements need to be assessed so as not to impose unnecessary requirements on the vehicle design that add unreasonable cost to the development of the system, yet provides the right capabilities for new markets that could be triggered by dramatically lower space transportation prices.     

KuaFu Mission

The KuaFu mission-Space Storms, Aurora and Space Weather Explorer-is an "L1+Polar" triple satellite project composed of three spacecraft: KuaFu-A will be located at L1 and have instruments to observe solar EUV and FUV emissions, and white-light Coronal Mass Ejections (CMEs), and to measure radio waves, the local plasma and magnetic field,and high-energy particles. KuaFuB1 and KuaFu- B2 will bein polar orbits chosen to facilitate continuous 24 hours a day observation of the north polar Aurora Oval. The KuaFu mission is designed to observe the complete chain of disturbances from the solar atmosphere to geospace, including solar flares, CMEs, interplanetary clouds, shock waves, and their geo-effects, such as magnetospheric sub-storms and magnetic storms, and auroral activities. The mission may start at the next solar maximum (launch in about 2012), and with an initial mission lifetime of two to three years. KuaFu data will be used for the scientific study of space weather phenomena, and will be used for space weather monitoring and forecast purposes. The overall mission design, instrument complement, and incorporation of recent technologies will target new fundamental science, advance our understanding of the physical processes underlying space weather, and raise the standard of end-to-end monitoring of the Sun-Earth system.     

Progress on Space Solar Telescope in 2004 - 2006

The progress on Chinese Space Solar Telescope (SST) in 2004-2006 is introduced. The scientific objectives are further clarified and the ground operation system has been planned. The 7 key technical problems of SST satellite platform and payloads have been tackled, which lay solid scientific and technological foundations for engineering prototype phase of the SST project. At present the SST project undergoes evaluation by CNSA and CAS so as to enter the engineering prototype phase of the SST project if it is finally approved.     

捷联惯导系统计算机硬件检测原理与实现

介绍一种实用捷联惯导系统计算机结构。主模块与美国SESCO/TITAN公司的SECS86/20模块兼容,检测软件可以检测板上大中规模集成芯片,具有检测全面、准确的特点,从方法与原理上都具有通用性,可以方便地移植到其它类似的机器上。该软件已用于实际系统。     

一种新型的通用计数器的设计

介绍一种以大规模集成电路为核心组成的通用计数器的设计。该通用计数器具有输出标准信号、测量频率、测量周期、累加计数和自校等多种功能。