微小薄板类零件的装夹及毛刺转移方法研究

针对微小薄板类零件装夹定位困难、毛刺去除难度大的工艺特点,提出"压板压装坯料+微型夹具固定零件"的微型组合装夹方法,设计三件套微型组合夹具,并提出一种毛刺转移方法,有效解决了微小薄板类零件的装夹及去毛刺难题,提高了微小薄板类零件的加工质量。     

Increase in fish abundance during two typhoons in the South China Sea

A fish monitoring program was conducted in the northern region of the South China Sea from March 2009 to December 2010. During this period, two typhoons, GONI and Koppu, hit this region consecutively in August and September 2009. The fish and satellite data were analyzed to understand the influence of the typhoons on fish activities. The results showed that the fish species number (FSN) increased by approximately 14.29% and 14.81% after the two typhoons, GONI and Koppu, respectively. The five increased fish species included three estuarine species and two shallow sea species. However, one shallow sea species was also absent. In the nearshore (near the Pearl River Estuary) and offshore (along the typhoon’s track) regions after GONI, the FSN increased by approximately 24% (nearshore) and 52.63% (offshore), with estuarine species accounting for 42.86% (nearshore) and 33.33% (offshore) of the fish species; after Koppu, the FSN increased by approximately 15.38% (nearshore) and 163.64% (offshore), with estuarine species accounting for 60% (nearshore) and 26.32% (offshore) of the fish species. In the increased records, small and medium-sized fish species were dominant nearshore, and small fish species were dominant offshore. The FSN increased to a maximum value between the 5th and the 10th days after the typhoon nearshore and between the 3rd and 8th days after the typhoon offshore. The results indicated that river discharge, triggered by the typhoon’s nearshore rainfall, as well as offshore upwelling nutrients, also triggered by the typhoons, and may have played important roles in the variability of fish species. This research found that the increase in the FSN was associated with the typhoons in the northern South China Sea.     

多雷达跟踪处理在空中交通管制领域的应用

多雷达跟踪处理系统是目前国际上最先进的空中交通管制（ＡＴＣ）系统,广州空中交通管制中心是国内第一家使用融合式多雷达处理方式的管制中心。描述了目前国际上实现多雷达跟踪的几种方法,并结合广州空中交通管制中心多雷达跟踪处理系统的建设,指出我雷达跟踪处理系统建设过程中需要解决的几个问题及解决方法。     

镁合金焊接的研究与发展

综述了三种典型的镁合金焊接技术的研究现状，分别为钨极氩弧焊、激光焊和搅拌摩擦焊，分析了镁合金焊接的研究和应用现状，讨论了这些焊接方法的优缺点，并指出镁合金焊接研究中存在的问题和今后的发展方向。     

京津奥运智能型多式联运发展模式

以北京和天津之间的多种城际交通方式为研究实例,从多式联运的角度分析了北京和天津奥运交通联合运作模式,并重点研究了奥运期间京津两地之间空铁联运和陆空联运的具体运作设想,提出在京津间建立高速铁路与航空联运的新型城际交通运输模式。     

网络环境下的知识产权保护

网络的发展推进了人类信息化进程。但网络也给知识产权的保护带来了难题。文章通过对网络环境下知识产权保护的诸多问题的讨论及其所使用法律法规的分析 ,从而提出了对其进行保护的措施。     

发动机安装面振动分析

在某民用涡轮风扇发动机的持久试车过程中 ,出现了发动机后安装面振动异常的现象。针对这一故障现象进行了模拟计算分析 ,找出了故障的原因 ,提出了改进措施 ,部分措施得以应用 ,其效果良好。     

爱尔朗排队模型在旅客候机楼中的应用

利用随机过程和排队论的基础知识,对爱尔朗排队模型进行性能分析和参数求解,给出其在机场旅客航站楼中的应用范围。通过实例计算,研究单路排队和多路排队方式的区别,为航站楼值机大厅的旅客组织和面积设计提供理论依据,推广排队论在航站楼设计中的应用。     

航空发动机离合器试验台扭矩测控系统的实现

提出了一种由异步电动机实现扭矩加载和控制的新方法，不需扭矩传感器和专门的加载装置实现了扭矩的测量和控制。采用Fuzzy-PID控制算法代替常规PID算法，能较好地模拟离合器的磨合、接合和超越等性能试验。     

推力室槽道式冷却通道尺寸优化设计方法

新一代液氧 /烃类推进剂液体火箭发动机将采用高燃烧室压力方案 ,这时推力室冷却成为一项关键技术问题。本文构造了一个槽道式再生冷却通道几何尺寸的优化设计方法 ,其优化目标是使通过冷却通道的冷却剂的压力损失最小。典型的计算、实验表明 ,采用优化设计方法可使冷却压力损失减少 50 % ,即采用优化设计有利于高室压推力室冷却问题的解决。