基于RBF网络的惯导系统初始对准

建立了惯导系统（ＩＮＳ）初始对准的线性和非线性误差模型。分析了径向基函数（ＲＢＦ）网络的结构和工作原理。研究了ＲＢＦ网代替初始对准中的卡尔曼滤波器的实现方法。通过仿真表明，用神经网络进行初始对准，既可获得与卡尔曼滤波相同的对准精度，又提高了系统的实时性。     

VentureStar… reaping the benefits of the X-33 program

Major X-33 flight hardware has been delivered, and assembly of the vehicle is well underway in anticipation of its flight test program commencing in the summer of 1999. Attention has now turned to the operational VentureStar^TM, the first single-stage-to-orbit (SSTO) reusable launch vehicle. Activities are grouped under two broad categories: (1) vehicle development and (2) market/business planning, each of which is discussed. The mission concept is presented for direct payload delivery to the International Space Station and to low Earth orbit, as well as payload delivery with an upper stage to Geosynchronous Transfer Orbit (GTO) and other high energy orbits. System requirements include flight segment and ground segment. Vehicle system sizing and design status is provided including the application of X-33 traceability and lessons learned. Technology applications to the VentureStar^TM are described including the structure, propellant tanks, thermal protection system, aerodynamics, subsystems, payload bay and propulsion. Developing a market driven low cost launch services system for the 21st Century requires traditional and non-traditional ways of being able to forecast the evolution of the potential market. The challenge is balancing both the technical and financial assumptions of the market. This involves the need to provide a capability to meet market segments that in some cases are very speculative, while at the same time providing the financial community with a credible revenue stream. Furthermore, the market derived requirements need to be assessed so as not to impose unnecessary requirements on the vehicle design that add unreasonable cost to the development of the system, yet provides the right capabilities for new markets that could be triggered by dramatically lower space transportation prices.     

Progress on Space Solar Telescope in 2004 - 2006

The progress on Chinese Space Solar Telescope (SST) in 2004-2006 is introduced. The scientific objectives are further clarified and the ground operation system has been planned. The 7 key technical problems of SST satellite platform and payloads have been tackled, which lay solid scientific and technological foundations for engineering prototype phase of the SST project. At present the SST project undergoes evaluation by CNSA and CAS so as to enter the engineering prototype phase of the SST project if it is finally approved.     

一种新型的通用计数器的设计

介绍一种以大规模集成电路为核心组成的通用计数器的设计。该通用计数器具有输出标准信号、测量频率、测量周期、累加计数和自校等多种功能。     

星光对机动弹道导弹主动段的修正

 <正> 以惯性技术为主,并以星光、无线电等其它技术为辅的组合导航及制导技术是70年代以来发展较为迅速,并被认为是行之有效的技术手段。特别是对于大型航空航天飞行器。例如航天飞机、远程导弹等,只有采用精密的组合导航技术才能保证这类飞行任务的完成。任何单一的导航及制导技术都有其长处及弱点,将这些单一的技术手段组合起来扬长避短、相互补偿,毫无疑问是一种可行的途径。星光的引进将会使对     

无人机航路规划技术研究进展

无人机航路规划问题本质是多约束条件下,多目标函数求极值的优化问题.规划出满足任务要求、导航、安全性等约束的较优航路,对提高无人机的武器系统性能有重要意义.通过对无人机航路规划的研究,对无人机航路规划问题进行了概括和总结,阐述了无人机航路规划的框架结构以及静态全局规划和动态局部规划方法的研究现状.分析了近年来常用的几种规划算法,着重分析了启发式算法以及遗传算法.在此基础上,对今后的研究方向进行了展望.     

基于冗余伪观测的自适应滤波算法

现有的二阶互差分(SOMD)算法能够给出与状态估计误差解耦的观测噪声协方差估计，但是需要满足冗余测量的条件，但这一条件往往难以满足。 针对这一问题，提出了一种利用状态预测值构造相邻2个时刻伪观测的方法，将原SOMD算法扩展到具有单测量的系统中。使用目标跟踪问题对该算法的有效性进行验证。仿真结果表明，当采样周期较小时，该算法能够忽略状态估计误差的影响并给出较准确的观测噪声方差，在精度和鲁棒性方面优于其他参考算法。     

GH169合金细晶锻造工艺研究

为了提高涡轮盘的强度和低周疲劳性能,要求锻件具有ASTM10级以上的细晶组织国外在大型压力机上采用低温大变形锻造和直接时效热处理以获得性能良好的细晶锻件,而我国则试图采用锻锤生产GH169合金涡轮盘锻件,因此,需要探索适合国情的GH169合金细晶锻造工艺。根据以往的研究,δ相对GH169合金的显微组织有明显影响,因而可     

相似理论在层板式喷注器试验研究中的应用

将相似理论应用于层板式喷注器的试验研究，利用自行设计的溅板式喷嘴进行了冷流试验，通过试验证明该喷嘴的原形件与模型件在满足几何相似且进入第二自模区的条件下，流动特性相似。最后阐述了此结论的重要意义。     

气膜冷却技术在火炮射击中的应用

炮管烧蚀一直是火炮性能提高所面临的一重大障碍，分析了火炮烧蚀的机理，提出了一种将冷却剂直接加于可燃药筒中的新型气膜冷却技术，从而在火炮内弹道性能有所提高的情况下提高了身管的使用寿命。