碳纤维复合材料高压球形容器研制

采用变带距方法对球形容器进行优化设计，并研制了一批产品。试验结果表明，在纤维设计应力相同条件下，采用变带距缠绕的球形容器，其复合材料重量比等带距缠绕的轻２４．５６％，而其容器特性系数高出１０．４％，能同时满足设计提出的强度和重量两方面要求。     

基于PCI总线的PC机再入遥测站设计

根据再入遥测的特点 ,提出基于 PCI总线和 Windows平台的 PC机再入遥测站的体系结构 ,重点对其关键技术即多通道高速数据的实时传输与存储技术进行研究     

基于FPGA的数据接口电路设计

鉴于FPGA设计数字电路的多种优势,针对星上相机输出数据格式和地面采集系统接收数据格式不一致性,改变传统的设计方式,进行了基于FPGA的数据接口电路设计。文章描述了电路设计的基本原理、实现方案、时序仿真,并对电路设计中遇到的关键问题的解决进行了阐述。其中实现方案包括FPGA外围电路硬件设计和FPGA芯片内软件时序设计。     

冲击响应谱计算相关参数选择的研究

国军标GJB2238A-2004《遥测数据处理》的附录K对冲击响应谱的计算方法和阻尼系数做了明确规定, 但未明确其它参数如何选择。文中以半正弦波的冲击响应谱为例,导出了冲击响应谱分析时选择其它相关参数的原则。     

激波在狭缝中绕射过程研究

针对固体火箭发动机药柱存在裂纹的情况，对运动激波在狭缝中绕射传播的非定常流场进行了计算，得到了清晰的流场变化图谱，从流场图中可分辨出激波在狭缝中的传播过程。对不同深宽比的狭缝进行研究，发现流场结构存在明显差别，在深宽比较小时狭缝内压力波振荡较小，当深宽比超过一定值时狭缝内的压力波产生剧烈振荡。研究结果表明，该方法可很好地描述激波在狭缝中的传播过程。     

基于RBF网络的惯导系统初始对准

建立了惯导系统（ＩＮＳ）初始对准的线性和非线性误差模型。分析了径向基函数（ＲＢＦ）网络的结构和工作原理。研究了ＲＢＦ网代替初始对准中的卡尔曼滤波器的实现方法。通过仿真表明，用神经网络进行初始对准，既可获得与卡尔曼滤波相同的对准精度，又提高了系统的实时性。     

VentureStar… reaping the benefits of the X-33 program

Major X-33 flight hardware has been delivered, and assembly of the vehicle is well underway in anticipation of its flight test program commencing in the summer of 1999. Attention has now turned to the operational VentureStar^TM, the first single-stage-to-orbit (SSTO) reusable launch vehicle. Activities are grouped under two broad categories: (1) vehicle development and (2) market/business planning, each of which is discussed. The mission concept is presented for direct payload delivery to the International Space Station and to low Earth orbit, as well as payload delivery with an upper stage to Geosynchronous Transfer Orbit (GTO) and other high energy orbits. System requirements include flight segment and ground segment. Vehicle system sizing and design status is provided including the application of X-33 traceability and lessons learned. Technology applications to the VentureStar^TM are described including the structure, propellant tanks, thermal protection system, aerodynamics, subsystems, payload bay and propulsion. Developing a market driven low cost launch services system for the 21st Century requires traditional and non-traditional ways of being able to forecast the evolution of the potential market. The challenge is balancing both the technical and financial assumptions of the market. This involves the need to provide a capability to meet market segments that in some cases are very speculative, while at the same time providing the financial community with a credible revenue stream. Furthermore, the market derived requirements need to be assessed so as not to impose unnecessary requirements on the vehicle design that add unreasonable cost to the development of the system, yet provides the right capabilities for new markets that could be triggered by dramatically lower space transportation prices.     

混合与扩散同时进行的环形引射系统引射性能实验研究

本文设计了“混合与扩散同时进行”的环形引射系统,并结合其驱动引射式风洞,实验探讨了该系统的参数影响规律及混合特性,结果表明,引射器系统采取“同时混合扩散”方式可达到与传统的“等截面混合后再扩散”的方式相当的性能,但新方式下则大大缩短了系统结构尺寸,因而具有重要的实用意义。实验表明“同时混合扩散”方式只宜于应用在具有周向喷流特点的系统中,同时混合扩散角应与常规扩散角相当(β=6°)。研究表明,讨论喷流马赫数Ma_j对性能的影响应与面积比A_2/A_*的变化独立开来,Mα_j变化对性能的影响不超过10％,而面积比变化对性能的影响十分显著,在面积比与膨胀比适当的配合下,可获得较高的系统效率。     

Progress on Space Solar Telescope in 2004 - 2006

The progress on Chinese Space Solar Telescope (SST) in 2004-2006 is introduced. The scientific objectives are further clarified and the ground operation system has been planned. The 7 key technical problems of SST satellite platform and payloads have been tackled, which lay solid scientific and technological foundations for engineering prototype phase of the SST project. At present the SST project undergoes evaluation by CNSA and CAS so as to enter the engineering prototype phase of the SST project if it is finally approved.     

一种新型的通用计数器的设计

介绍一种以大规模集成电路为核心组成的通用计数器的设计。该通用计数器具有输出标准信号、测量频率、测量周期、累加计数和自校等多种功能。