PVC糊树脂对交联PVC泡沫塑料的影响

通过水煮发泡制备交联聚氯乙烯泡沫塑料,讨论了聚氯乙烯(PVC)糊树脂对泡沫制备过程中经制糊、模压和发泡工艺得到的产物的影响,研究了PVC糊树脂对制备的交联PVC泡沫压缩性能的影响.结果表明:制备交联聚氯乙烯泡沫塑料适宜的糊黏度是4～9 Pa·s;PVC糊树脂的K值较大或水萃取液pH值呈碱性可有效防止模压过程中PVC的降解;PVC糊树脂的水萃取液pH值呈碱性可催化发泡反应,有利于得到低密度泡沫且缩短发泡时间;随着其K值增加,制备的泡沫压缩强度增大,但是K值过大时,制备的泡沫泡孔较大,压缩强度反而降低,适宜的K值为70～80.     

高分辨率格式与钝舵绕流数值模拟

 采用Beam-Warming/TVD格式，Roe二阶、三阶以及四阶通量差分分裂格式数值计算雷诺平均Navier-Stokes方程，湍流附加粘性采用Baldwin-Lomax模型计算，针对超声速绕钝圆舵流动进行了数值模拟比较研究，计算给出了流场的详细结构，物面压力分布与实验值符合良好，尤其是Roe三阶格式给出了较好的计算结果，两个超声速回流区以及湍流边界层分离也得到了很好的数值模拟。     

不确定载荷下的桁架结构拓扑优化

对带有不确定扰动载荷的桁架结构拓扑优化问题进行了研究.将不确定载荷表示成有界凸集,从而把不确定性问题转化为一个确定性问题.构造了凸集载荷下以体积为约束的柔度最小化模型,该优化模型的实质是在高维椭球内计算最大柔度最小问题.由于采用传统优化模型存在计算上的困难,对凸集载荷进行了数学处理,并据此构造了半定规划形式的优化模型以便求解.优化结果相对于给定载荷的刚度虽然略低,但对不确定的扰动载荷却具有一定的承载能力.算例表明通过半定规划法构造的考虑扰动载荷作用下的优化结果鲁棒性较佳,结构形式更接近于实际工程结构.     

Autonomous navigation of formation flying spacecrafts in deep space exploration and communication by hybrid navigation utilizing neural network filter

Autonomous navigation of spacecrafts is a difficult task, however, which is a must in future deep space exploration. With multiple spacecrafts flying in space, this aim can be achieved by formation flying spacecraft (FFS) utilizing inverse time difference of arrival (ITDOA) and inverse difference Doppler (IDD) methods, which can locate the position of earth-station from one-way uplink signals in the FFS coordinate, and by way of conversion of coordinates, the position of FFS is achieved in earth-centered earth-fixed (ECEF) coordinate. The ability of neural network (NN) filter in navigation to extract position of spacecrafts from random measuring noise of signal arrival time and Doppler shift is studied with different radius of FFS and surveying parameters. The NN filter used by spacecraft group is new way of unidirectional autonomous navigation and is of high precision of hybrid navigation.     

The Magnetic Electron Ion Spectrometer (MagEIS) Instruments Aboard the Radiation Belt Storm Probes (RBSP) Spacecraft

This paper describes the Magnetic Electron Ion Spectrometer (MagEIS) instruments aboard the RBSP spacecraft from an instrumentation and engineering point of view. There are four magnetic spectrometers aboard each of the two spacecraft, one low-energy unit (20–240 keV), two medium-energy units (80–1200 keV), and a high-energy unit (800–4800 keV). The high unit also contains a proton telescope (55 keV–20 MeV). The magnetic spectrometers focus electrons within a selected energy pass band upon a focal plane of several silicon detectors where pulse-height analysis is used to determine if the energy of the incident electron is appropriate for the electron momentum selected by the magnet. Thus each event is a two-parameter analysis, an approach leading to a greatly reduced background. The physics of these instruments are described in detail followed by the engineering implementation. The data outputs are described, and examples of the calibration results and early flight data presented.     

中介机匣典型故障排除及深度修理

航空发动机中介机匣组件因各种故障而需修理或导致报废的现象时有发生。针对发动机中介机匣分流环裂纹掉块、上部衬套磨损松动、弹性环磨损、同心度检测不合格等故障进行分析研究,提出解决措施,制定满足发动机使用要求的合理技术标准和修理方法。在修理技术方法中,采用挖补补焊方法解决分流环裂纹掉块故障;采用极坐标定位与专用模板衬套相结合的方法提高新品衬套加工精度以解决上部衬套更换新品后装配准确性难题;采用装配过盈销钉和扩口工艺以保证零件的堵孔质量等。结果表明:这些修理措施提高了中介机匣零部件的利用率,延长了其使用寿命,降低了发动机修理成本。     

扩压器内的冷凝对流场的影响

扩压器处于超临界工作状态时,由于喉道后面的激波与附面层的相互作用,使出口流场发生畸变.本文探讨了扩压器内发生的冷凝对畸交流场的影响.结果表明,在实验范围内,由于冷凝使畸变流场的平均紊流度增加12～25%,稳态畸变指数DC_(60)可能增加、不变或减小.可见在研究发动机与进气道的相容性时,冷凝是不可忽视的影响因素之一.     

光纤陀螺用光收发组件的SLD准直系统设计

在光纤陀螺向高精度和小型化的方向发展的背景下,针对光纤陀螺用光收发组件对器件小型化、易集成的特殊要求和超辐射发光二极管SLD(Super-Luminescent Diode)出射光束的特点,提出利用双焦距双柱透镜准直整形系统对SLD光束进行准直、整形.根据椭圆高斯光束的特性,利用几何光学法和矩阵光学法,分别对该双柱透镜的重要结构参数(曲率、柱透镜厚度)进行了详细的计算及分析,并且利用矩阵光学法得出系统的光线传输矩阵,对该双柱透镜的结构参数进行优化设计.利用CODEⅤ光学仿真软件对优化后的系统进行仿真,得出准直整形后光束在xOz平面和yOz平面内的发散角仿真值均低于0.05 mrad,且光斑为圆形.     

三维编织复合材料及其RTM成型工艺

文章阐述了三维编织工艺,并将三维编织复合材料的性能与传统铺层复合材料的性能作了比较。同时,还介绍了其成型方法—RTM工艺的原理及特点,并提供了一种适于RTM工艺的树脂体系。     

Additive time synchronous system in existing SDH networks

A simplified SDW (synchronous digital hierarchy)-based time synchronous system that does not need modification of existing SDH transmission equipment (STE) and clock supply equipment (CSE) is proposed. The system has auxiliary time synchronizing equipment attached to existing STE and CSE, where frequency and time are separately synchronized, and which enables us to partially time-synchronize an SDH network or to introduce a time synchronous system locally. Experimental time synchronizing devices using a data communication channel (DCC) in the section overhead (SOH) showed potentially satisfactory performance; synchronization errors of a 4-link system are of the order of sub-microseconds