Distributed computation for a tree network with communicationdelays

Tree networks of communicating processors are examined with the objective of solving a computational problem in a minimal amount of time. The processors in the networks may be equipped either with or without front-end processors for communicating of loading. The determination of the optimal division of processing load is discussed for the network with and the network without front-end processors. The inclusion of solution time, the time taken for sensors to report the solution back to originator, is discussed     

Optimal speckle reduction in polarimetric SAR imagery

Speckle is a major cause of degradation in synthetic aperture radar (SAR) imagery. With the availability of fully polarimetric SAR data, it is possible to use the three complex elements (HH, HV, VV) of the polarimetric scattering matrix to reduce speckle. The optimal method for combining the elements of the scattering matrix to minimize image speckle is derived, and the solution is shown to be a polarimetric whitening filter (PWF). A simulation of spatially correlated, K-distributed, fully polarimetric clutter is then used to compare the PWF with other, suboptimal speckle-reduction methods. Target detection performance of the PWF, span, and single-channel |HH|² detectors is compared with that of the optimal polarimetric detector (OPD). A novel, constant-false-alarm-rate (CFAR) detector (the adaptive PWF) is as a simple alternative to the OPD for detecting targets in clutter. This algorithm estimates the polarization covariance of the clutter, uses the covariance to construct the minimum-speckle image, and then tests for the presence of a target. An exact theoretical analysis of the adaptive PWF is presented; the algorithm is shown to have detection performance comparable with that of the OPD     

The complex Hα profile of the hypergiant HR 8752 during 1970–1992

The profiles of H observed during the 1970–1992 period in the binary hypergiant HR 8752 (G0 Ia) are presented. We distinguish five typical H profiles designated as A, B, C, D and E types according to the number of emission and absorption features. The profiles of H are complex and contain several emission and absorption components, with: –130 km/s in emission or absorption, –84 km/s in absorption, –49 km/s in emission and about +6 km/s in emission. All of them are rather stable in radial velocities except of the main absorption component in the P Cygni profile with –84 km/s. The frequency of appearance and the periods of duration of the occurrence of the components is discussed. The duration times range between about 3 to 10 months for various components. The red emission component E₂ is particularly interesting. Possible explanations of its origin are discussed.A long-term acceleration of the absorption component in the P Cygni profile is found; it can be interpreted as monotonous acceleration of the stellar wind.     

AC/DC converter topologies for the Space Station

A new class of AC/DC converter topologies (Type-1 converters) is described, suitable for use in an advanced single-phase sine-wave voltage, high-frequency power distribution system, of the type that was proposed for a 20 kHz Space Station primary electrical power distribution system. The converter comprises a transformer, a resonant network, a current controller, a diode rectifier, and an output filter. The input AC voltage source is converted into a sinusoidal current source using the resonant network. The output of this current source is rectified by the diode rectifier and is controlled by the current controller. The controlled rectified current is then filtered by the output filter to obtain a constant voltage across the load. Three distinct converter topologies, Type-1A, Type-1B, and Type 1-C, are described, and their performance characteristics are presented. All three types have a close-to-unity rated power factor (greater than 0.98), low total harmonic distortion in input current (less than 5%), and high conversion efficiency (greater than 96%)     

Multiple target tracking using products of position measurements

The continued development of the symmetric measurement equation (SME) filter for track maintenance in multiple target tracking (MTT) is considered, focusing on the case in which the SMEs are generated by forming sums of products of the original position measurements. The SME filter is developed for the case of N targets whose motions consist of random perturbations about constant-velocity trajectories. It is assumed that measurements of x-coordinate positions are available, and that the number of measurements is equal to the number of targets. Various analytical properties of the SME filter are studied. It is shown that under a very weak condition, the estimation error equation is locally exponentially stable. The performance of the SME filter is investigated by comparing it with an optimal (minimum-variance) estimator and by generating a computer simulation in the six-target case     

Multitarget detection using Kalman-based average displacementestimator

The anomaly in the displacement estimates obtained from a low-level Kalman-based average displacement estimator is used to detect multiple targets in a forward-looking infrared (FLIR) scene. The displacement estimates originating from the targets could be associated with the detected multiple targets and an updated estimated position of the target could be obtained. This procedure could be repeated for all targets in the scene to obtain multitarget tracking. The behavior of the expected value of the displacement estimates as a function of the number of iterations is investigated. The behavior of the displacement error covariance matrix and the Kalman gain matrix are discussed as functions of the number of iterations     

Multiposition alignment of strapdown inertial navigation system

The authors demonstrate that the stationary alignment of strapdown inertial navigation system (SDINS) can be improved by employing the multiposition/technique. Using an observability analysis, it is shown that an optimal two-position alignment not only satisfies complete observability conditions but also minimizes alignment errors. This is done by analytic rank testing of the stripped observability matrix and numerical calculation of the error covariance. It is also shown that an optimal three-position alignment accelerates the convergence of the alignment error compared with two-position alignment     

Optical design and testing of a fast,large aperture,infrared space telescope

An optical design study for a next generation infrared space telescope has been performed. The concept is that of a passively cooled telescope of minium aperture 2.5 metre with an F/1.2 primary and wavelength coverage from = 2 to at least 40 m, and possibly to 100 m. Compactness, low thermal emission from the optics and structure, diffraction limited imaging at = 2 m, and sensitivity to misalignment aberrations and manufacturing errors were the main considerations for this study. Ray tracing results are presented showing the characteristics of the various designs considered. A preliminary investigation of stray light properties is also given. Special emphasis has been placed on the testing of such a fast primary, and optical systems using a lateral shearing interferometer are described for testing both the primary and the primary/secondary combination.     

The Galileo Probe Atmosphere Structure instrument

The Galileo Probe Atmosphere Structure Instrument will make in-situ measurements of the temperature and pressure profiles of the atmosphere of Jupiter, starting at about 10^-10 bar level, when the Probe enters the upper atmosphere at a velocity of 48 km s^-1, and continuing through its parachute descent to the 16 bar level. The data should make possible a number of inferences relative to atmospheric and cloud physical processes, cloud location and internal state, and dynamics of the atmosphere. For example, atmospheric stability should be defined, from which the convective or stratified nature of the atmosphere at levels surveyed should be determined and characterized, as well as the presence of turbulence and/or gravity waves. Because this is a rare opportunity, sensors have been selected and evaluated with great care, making use of prior experience at Mars and Venus, but with an eye to special problems which could arise in the Jupiter environment. The temperature sensors are similar to those used on Pioneer Venus; pressure sensors are similar to those used in the Atmosphere Structure Experiment during descent of the Viking Landers (and by the Meteorology Experiment after landing on the surface); the accelerometers are a miniaturized version of the Viking accelerometers. The microprocessor controlled experiment electronics serve multiple functions, including the sequencing of experiment operation in three modes and performing some on-board data processing and data compression.