A new static-launch method for plastic balloons

A new static-launch method that we have developed as an improvement of our former method is described. The key procedure is to extend a whole balloon vertically upon the launcher before release, with squeezing the top bubble of the balloon by a soft collar. The new method improved the capability for heavier payload significantly. In 1981, 15 balloons, ranging from 5,000 m³ to 50,000 m³ in volume with a total lift from 150 kg to 650 kg, were launched by this new method successfully.     

Flares of August 1972: Analysis of dynamics

The optical observations and analyses of the flares of August 1972 are reviewed with emphasis on their dynamics. In particular, various assessments are made of possible quantitative interpretation of observed data. Specific topics considered are the storage and release of magnetic energy, triggering mechanisms, particle acceleration and magnetic field reconnection, and coronal and solar wind responses. Supplemental discussions on possible future direction of research are presented, illustrating the need for examination of the storage and release of flare energy in the lower solar atmosphere.On leave from the High Altitude Observatory.The National Center for Atmospheric Research is sponsored by the National Science Foundation.     

Simulation of space cabin atmosphere

The Soyuz 22 space cabin atmosphere was studied for volatile organic trace contaminants. By gas chromatography the following constituents were identified: methane, ethane, heptane, methanol, ethanol, n-propanol, acetaldehyde, acetone, ethyl benzene. Except for acetone, concentrations of the above compounds were close to the values determined in the mock-up experiments.     

Formation of oligopeptides on the surface of small bodies in solar system by cosmic radiation.

The present experiment indicates that oligopeptides are easily produced in solid state from mixtures of simple amino acids by irradiating with high energy charged particles. We investigated such amino acids and their mixtures as tryptophan, tyrosine and glycine. The thin films was irradiated with protons (6.6 MeV). Such dipeptides as Trp-Trp, Gly-Tyr, Tyr-Gly, and Tyr-Tyr have been detected as products of irradiation. Cosmic rays might be an effective energy source for abiotic formation of bioorganic compounds on the surface of small bodies in the solar system on early stage of formation of planets as well as at present day.     

A challenge to the highest balloon altitude

Development of a balloon to fly at higher altitudes is one of the most attractive challenges for scientific balloon technologies. After reaching the highest balloon altitude of 53.0 km using the 3.4 μm film in 2002, a thinner balloon film with a thickness of 2.8 μm was developed. A 5000 m³ balloon made with this film was launched successfully in 2004. However, three 60,000 m³ balloons with the same film launched in 2005, 2006, and 2007, failed during ascent. The mechanical properties of the 2.8 μm film were investigated intensively to look for degradation of the ultimate strength and its elongation as compared to the other thicker balloon films. The requirement of the balloon film was also studied using an empirical and a physical model assuming an axis-symmetrical balloon shape and the static pressure. It was found that the film was strong enough. A stress due to the dynamic pressure by the wind shear is considered as the possible reason for the unsuccessful flights. A 80,000 m³ balloon with cap films covering 9 m from the balloon top will be launch in 2011 to test the appropriateness of this reinforcement.     

Decentralized formation pose estimation for spacecraft swarms

For spacecraft swarms, the multi-agent localization algorithm must scale well with the number of spacecraft and adapt to time-varying communication and relative sensing networks. In this paper, we present a decentralized, scalable algorithm for swarm localization, called the Decentralized Pose Estimation (DPE) algorithm. The DPE considers both communication and relative sensing graphs and defines an observable local formation. Each spacecraft jointly localizes its local subset of spacecraft using direct and communicated measurements. Since the algorithm is local, the algorithm complexity does not grow with the number of spacecraft in the swarm. As part of the DPE, we present the Swarm Reference Frame Estimation (SRFE) algorithm, a distributed consensus algorithm to co-estimate a common Local-Vertical, Local-Horizontal (LVLH) frame. The DPE combined with the SRFE provides a scalable, fully-decentralized navigation solution that can be used for swarm control and motion planning. Numerical simulations and experiments using Caltech’s robotic spacecraft simulators are presented to validate the effectiveness and scalability of the DPE algorithm.     

The WIND magnetic field investigation

The magnetic field experiment on WIND will provide data for studies of a broad range of scales of structures and fluctuation characteristics of the interplanetary magnetic field throughout the mission, and, where appropriate, relate them to the statics and dynamics of the magnetosphere. The basic instrument of the Magnetic Field Investigation (MFI) is a boom-mounted dual triaxial fluxgate magnetometer and associated electronics. The dual configuration provides redundancy and also permits accurate removal of the dipolar portion of the spacecraft magnetic field. The instrument provides (1) near real-time data at nominally one vector per 92 s as key parameter data for broad dissemination, (2) rapid data at 10.9 vectors s^–1 for standard analysis, and (3) occasionally, snapshot (SS) memory data and Fast Fourier Transform data (FFT), both based on 44 vectors s^–1. These measurements will be precise (0.025%), accurate, ultra-sensitive (0.008 nT/step quantization), and where the sensor noise level is <0.006 nT r.m.s. for 0–10 Hz. The digital processing unit utilizes a 12-bit microprocessor controlled analogue-to-digital converter. The instrument features a very wide dynamic range of measurement capability, from ±4 nT up to ±65 536 nT per axis in eight discrete ranges. (The upper range permits complete testing in the Earth's field.) In the FTT mode power spectral density elements are transmitted to the ground as fast as once every 23 s (high rate), and 2.7 min of SS memory time series data, triggered automatically by pre-set command, requires typically about 5.1 hours for transmission. Standard data products are expected to be the following vector field averages: 0.0227-s (detail data from SS), 0.092 s (detail in standard mode), 3 s, 1 min, and 1 hour, in both GSE and GSM coordinates, as well as the FFT spectral elements. As has been our team's tradition, high instrument reliability is obtained by the use of fully redundant systems and extremely conservative designs. We plan studies of the solar wind: (1) as a collisionless plasma laboratory, at all time scales, macro, meso and micro, but concentrating on the kinetic scale, the highest time resolution of the instrument (=0.022 s), (2) as a consequence of solar energy and mass output, (3) as an external source of plasma that can couple mass, momentum, and energy to the Earth's magnetosphere, and (4) as it is modified as a consequence of its imbedded field interacting with the moon. Since the GEOTAIL Inboard Magnetometer (GIM), which is similar to the MFI instrument, was developed by members of our team, we provide a brief discussion of GIM related science objectives, along with MFI related science goals.     

Thermal and nonthermal flare emission observed with the Nobeyama Radio Heliograph

The early phases of three flares, observed by the Nobeyama Radio Heliograph, are studied. Nonthermal and thermal radio sources are identified by comparison with soft X-ray images taken by the Soft X-ray Telescope onboard the Yohkoh satellite. Two of the flares are mainly of nonthermal origin and their location coincides with one of the footpoints of soft X-ray loops. Another flare has both thermal and nonthermal components which start to brighten simultaneously. This suggests that particle acceleration and plasma compression develop simultaneously.     

Design of Switching Regulator with Combined FM and On-Off Control

The design and implementation of a switching regulator incorporating a high-frequency series-resonant converter and a combined FM and on-off feedback control is presented. The combined FM and on-off control results in a better conversion efficiency and a wider range of operational input voltage and output current. A 22.5 V, 50 W experimental regulator has been built to demonstrate the practicality of the circuit and its high efficiency, typically 92 to 96 percent, depending on the input and loading conditions.     

Analysis of Limit Cycles in a Two-Transistor Saturable-Core Parallel Inverter

A familiar two-transistor saturable-core parallel inverter is modeled as a nonlinear negative resistance in parallel with energy-storage elements. The techniques of singular-point analysis are combined with piecewise linear techniques to permit determination of solution trajectories on the phase plane. Clear insight is provided, not only into steady-state oscillation, but also into transient behavior of the circuit. Experimental results confirming the analytical model are included.