反坦克导弹飞行模拟训练成绩评定方法

以合理评价在反坦克导弹模拟训练器上受训射手的训练成绩为主要研究目的，通过对坦克外形的简化和坐标变换，建立了判断导弹命中坦克的数学模型；通过将理想瞄准点扩展成理想瞄准区域，建立了成绩评定的数学模型；在确保动画过程实时性的前提下，可全面合理地评价射击训练过程中射手的操作水平，为培训和选拔射手提供定量依据。     

A Concept of Position Fixing by a Passive Mode Navigation Satellite System

A position fix in a passive mode using satellites usually necessitates an expensive computer or lengthy hand calculation. This is the largest drawback of passive navigation and it would be more desirable if the user could find his position by a mere glance at a chart and table, as one uses Loran. The first step toward this goal is to use a synchronous satellite because it simplifies the problem. The next step is to find the position of the user by a Loran type of chart, which is universal, and correct this apparent position by looking at a special table which is made according to the amount of perturbation of both the satellite and the user's position. An example of the position fix along the route between Yokohama to Hawaii is shown. The concept can be extended to orbiting satellites due to the rules which govern the motion of satellites, if the fix accuracy is in the order of 2 to 5 miles. This method should be more accurate than the common sextant and more practical due to the fact that the satellite can be used at any time and in any weather. As a total system, it will be better than Omega because it could provide additional navigation information such as communication or traffic control by using satellites.     

A recursive multiple model approach to noise identification

Correct knowledge of noise statistics is essential for an estimator or controller to have reliable performance. In practice, however, the noise statistics are unknown or not known perfectly and thus need to be identified. Previous work on noise identification is limited to stationary noise and noise with slowly varying statistics only. An approach is presented here that is valid for nonstationary noise with rapidly or slowly varying statistics as well as stationary noise. This approach is based on the estimation with multiple hybrid system models. As one of the most cost-effective estimation schemes for hybrid system, the interacting multiple model (IMM) algorithm is used in this approach. The IMM algorithm has two desirable properties: it is recursive and has fixed computational requirements per cycle. The proposed approach is evaluated via a number of representative examples by both Monte Carlo simulations and a nonsimulation technique of performance prediction developed by the authors recently. The application of the proposed approach to failure detection is also illustrated     

涡轮叶片表面气膜冷却效率的实验研究

采用放大的叶片模型，利用大尺寸低速线性叶栅风洞进行实验，测量了涡轮导向叶片表面不同位置单排气膜孔的气膜冷却效率，研究了孔排位置、吹风比及来流雷诺数的影响。风洞实验段由3个叶片组成，其中中间的叶片为试验叶片，由优质木材制成。试验叶片表面上开有15排气膜孔，其中吸力面3排，前缘区6排，压力面6排。实验的参数变化范围是：基于叶片弦长的来流雷诺数250000-450000，吹风比0．5-2．5。结果表明，由于气膜孔排位置的不同，其下游冷却效率受来流雷诺数及吹风比影响的变化趋势也有所不同。     

The Plasma Environment of Comet 67P/Churyumov-Gerasimenko Throughout the Rosetta Main Mission

The plasma environment of comet 67P/Churyumov-Gerasimenko, the Rosetta mission target comet, is explored over a range of heliocentric distances throughout the mission: 3.25 AU (Rosetta instruments on), 2.7 AU (Lander down), 2.0 AU, and 1.3 AU (perihelion). Because of the large range of gas production rates, we have used both a fluid-based magnetohydrodynamic (MHD) model as well as a semi-kinetic hybrid particle model to study the plasma distribution. We describe the variation in plasma environs over the mission as well as the differences between the two modeling approaches under different conditions. In addition, we present results from a field aligned, two-stream transport electron model of the suprathermal electron flux when the comet is near perihelion.     

The Pre-CME Sun

The coronal mass ejection (CME) phenomenon occurs in closed magnetic field regions on the Sun such as active regions, filament regions, transequatorial interconnection regions, and complexes involving a combination of these. This chapter describes the current knowledge on these closed field structures and how they lead to CMEs. After describing the specific magnetic structures observed in the CME source region, we compare the substructures of CMEs to what is observed before eruption. Evolution of the closed magnetic structures in response to various photospheric motions over different time scales (convection, differential rotation, meridional circulation) somehow leads to the eruption. We describe this pre-eruption evolution and attempt to link them to the observed features of CMEs. Small-scale energetic signatures in the form of electron acceleration (signified by nonthermal radio bursts at metric wavelengths) and plasma heating (observed as compact soft X-ray brightening) may be indicative of impending CMEs. We survey these pre-eruptive energy releases using observations taken before and during the eruption of several CMEs. Finally, we discuss how the observations can be converted into useful inputs to numerical models that can describe the CME initiation.     

Tracking in clutter with nearest neighbor filters: analysis andperformance

The measurement that is “closest” to the predicted target measurement is known as the “nearest neighbor” (NN) measurement in tracking. A common method currently in wide use for tracking in clutter is the so-called NN filter, which uses only the NN measurement as if it were the true one. The purpose of this work is two fold. First, the following theoretical results are derived: the a priori probabilities of all three data association events (updates with correct measurement, with incorrect measurement, and no update), the probability density functions (pdfs) of the NN measurement conditioned on the association events, and the one-step-ahead prediction of the matrix mean square error (MSE) conditioned on the association events. Secondly, a technique for prediction without recourse to expensive Monte Carlo simulations of the performance of tracking in clutter with the NN filter is presented. It can quantify the dynamic process of tracking divergence as well as the steady-state performance. The technique is a new development along the line of the recently developed general approach to the performance prediction of algorithm with both continuous and discrete uncertainties     

密集根之特征向量导数的改进高精度动柔度法

作者曾为许多特征向量导数计算，提出过一种介于直接法（指直接求解线代方程组的，以Nelson为代表的一类方法）和模态法之间的高精度动柔度法。这种方法与作者建立的一般动柔度法一样，不能用于密集根之特征向量导数的计算。为使该方法扩展到密集根状态，本文将作者发展的混合移频技术应用于原高精度动柔度法，并重新推导了混合移频系统 的高精度动柔度式，从而形成能适用于许多密集根之特征向量导数计算的改进高精度动柔度法。     

铸造SiCp／ZL101复合材料的组织与性能

本文利用半固态搅拌铸造法制备了ＳｉＣｐ／ＺＬ１０１复合材料，对其组织和某些性能进行了研究，结果表明：ＳｉＣｐ在基体中分布均匀，无严重团聚现象，与基体结合良好，与基体合金相比，耐磨性，硬度有显著提高。     

一个柔性化MIS系统的设计与开发

本文针对传统ＭＩＳ系统的局限，提出了柔性化ＭＩＳ系统的概念和定义。着重介绍了一个柔性化ＭＩＳ系统ＮＭＳ开发实例，介绍其设计思想和实现该系统柔性化所具备的支撑模块及这些模块的设计要点和功能等，还介绍了该系统的体系结构。在该系统中用户可以灵活地定义或修改数据模式，而且输入、输出、查询、修改、删除和统计等模块均为通用的，不因数据模式或系统功能的修改而变动源程序。源程序的中用户库名和所有条件成分均以参数或