GPS sensing of precipitable water vapour during the March 2010 Melbourne storm

The March 2010 Melbourne storm is used as a case study to examine the potential of using Global Positioning System (GPS) observations for studying the precipitable water vapour (PWV) field. The Victorian statewide GPS infrastructure network, i.e. GPSnet, was used in this study. GPSnet is currently the only statewide and densest GPS infrastructure network in Australia, which provides an excellent opportunity to examine the distribution of water vapour as the severe weather system passed over the state. Data from 15 GPSnet stations were processed over a one-week period, i.e. a few days prior to and after the storm passage, during which the course of the storm extended from the west to the southeast corner of the state. In addition, data from two radiosonde sites of the Australian Bureau of Meteorology Upper Air Network were used to compare and validate the GPS derived PWV measurements. The findings demonstrate that there is strong spatial and temporal correlation between variations of the ground-based GPS-PWV estimates and the passage of the storm over the state. This is encouraging as the ground-based GPS water vapour sensing technique can be considered as a supplemental meteorological sensor in studying severe weather events. The advantage of using ground-based GPS-PWV technique is that it is capable of providing continuous observation of the storm passage with high temporal resolution. The spatial resolution of the distribution of water vapour is dependent on the geographical location and density of the GPS stations.     

Cosmic ray H/H ratio measured from BESS in 2000 during solar maximum

The Balloon-borne Experiment with a Superconducting Spectrometer (BESS) was flown from Lynn Lake, Manitoba, Canada in August, 2000, during the maximum solar modulation period, with an average residual atmospheric overburden of 4.3 g/cm². Precise spectral measurements of cosmic ray hydrogen isotopes from 0.178 GeV/n to 1.334 GeV/n were made during the 28.7 h of flight. This paper presents the measured energy spectra and their ratio, ²H/¹H. The results are also compared with previous measurements and theoretical predictions.     

Statistical study of electrostatic solitary waves associated with reconnection: Geotail observations

The role of waves in the dynamics of the magnetotail has long been a topic of interest in magnetospheric physics. The characteristics of Electrostatic Solitary Waves (ESWs) associated with reconnection have been studied statistically in the magnetotail by surveying the large amounts data obtained from Waveform Capture (WFC) which is an important component of Plasma Wave Instrument (PWI) on the Geotail spacecraft. About 150 reconnection events with WFC data available are selected, and approximately 10 thousands of ESW waveforms are picked up by hands for statistical study. The ESWs are observed near diffusion region and near the plasma sheet boundary layer (PSBL). Two kinds of waveforms of ESWs are observed: bi-polar and tri-polar pulses. It is found that the pulse width of the ESWs is in the order of 1–5 ms and the peak-to-peak amplitude is in the order of 0.1–5 mV/m. The amplitudes of ESWs are larger in the near-earth tail region than that in deep tail region. ESWs have been observed with or without guide magnetic field 〈By〉. The characteristics of ESWs in different reconnection region and under different strength of guild magnetic field, their possible generation mechanism will be discussed.     

A noise attenuation method for medium-energy electron measurements in the radiation belt

From the viewpoint of plasma particle measurements in the radiation belt, background noise is a serious problem. High-energy particles penetrating the sensor shielding generate spurious signals, and their count rate often can be comparable to the true signals. In order to attenuate such background noise during medium-energy (5–83 keV) electron measurements, we propose the double energy analyses (DEA) method. DEA is conducted by a combination of an electrostatic analyser (ESA) and avalanche photo-diodes (APDs); ESA and APD independently determine the energy of each incoming particle. By using the DEA method, therefore, the penetrating particles can be rejected when the two energy determinations are inconsistent; spurious noise are caused only when the deposited energy at an APD is by chance consistent with the measured energy by ESA. We formulate the noise count rate and show the advantage of DEA method quantitatively.     

Method of the HF wave absorption evaluation based on GIRO network data

High frequency (HF) communication is strongly dependent on the state of the ionosphere, which specifies the mode structure of the radio wave propagating in ionosphere. Another core factor defining the strength of the HF signal at the receiving site is the ionospheric absorption. Accurate modelling the effect of absorption is an essential part of many studies of the HF propagation in the ionosphere.This paper proposes a method for estimating the absorption. The method is based on analysis of vertical sounding ionograms. The main idea of the approach is to compare the main parameters retrieved from measured and simulated ionograms. The combination of Global Ionospheric Radio Observatory (GIRO, http://giro.uml.edu) data and ionograms modelling allows for developing the empiric absorption model available at near real-time. The ionogram simulation taking into account absorption utilizes the NIM-RT (North Ionospheric Model and Ray Tracing) software. As a result, the proposed technique provides more reliable and accurate evaluation of minimum frequency at which echoes are observed in vertical incidence ionosonde soundings. The values of these frequencies should be used in the following simulation to optimize parameters in the empirical formulae for defining absorption HF wave in ionosphere.The ultimate objective of this work is the designing the method, which allows the simulating of HF radio channel accounting for regular absorption due to UV radiation of the Sun. Eventually it could be considered as some kind of the HF propagation forecasting.     

Performance of GPS-based accelerometry: A simulation experiment

Recent studies have shown that with the availability of high-quality CHAMP and GRACE gravity field models, it is feasible to determine accurate non-gravitational accelerations for low Earth orbiting satellites indirectly from precise GPS satellite-to-satellite observations. Possible applications of this so-called GPS-based accelerometry approach consist of accelerometer calibration and atmospheric density and wind computations. With the growing number of high-quality space-borne GPS receivers, this method could be applied to a large range of satellites. In this paper an extensive simulation study has been carried out, based on real accelerometer data from the GRACE mission, in order to determine the optimal processing strategy and the resulting accuracy of the estimated non-gravitational accelerations. It is shown that the optimal processing strategy consists of a piecewise linear parameterization of the estimated empirical accelerations, together with short 6-h orbit arcs. The GPS-based accelerometry approach makes use of triple-differenced GPS observations and the impact of considering the correlated observation noise was found to be marginal in the presence of other error sources such as GPS ephemeris errors. Using a priori non-gravitational force models improves the recovery of low temporal resolution accelerations, except during huge geomagnetic storms. With this strategy, non-gravitational accelerations can be recovered during high solar activity with an accuracy of better than 10% of the total signal in along-track direction and around 25–40% in cross-track direction, at time resolutions of around 8–20 min. During solar minimum conditions, the relative recovery error will increase to approximately 50% in along-track direction and around 60–70% in cross-track direction, due to the reduced atmospheric drag signal. Unfortunately, GPS-based accelerometry is hardly sensitive in the radial direction.     

An update about recent developments of the PHITS code

PHITS (Particle and Heavy-Ion Transport code System) is a general-purpose three-dimensional Monte Carlo code, developed and maintained by RIST, JAEA and KEK in Japan together with Sihver et al. at Chalmers in Sweden. PHITS can deal with the transports of all varieties of hadrons and heavy ions with energies up to around 100 GeV/nucleon, and in this paper the current status of PHITS is presented. We introduce a relativistically covariant version of JQMD, called R-JQMD, that features an improved ground state initialization algorithm, and we will present the introduction of electron and photon transport in PHITS using EGS5, which have increased the energy region for the photon and energy transport from up to around 3 GeV to up to several hundred GeV depending on the atomic number of the target. We show how the accuracy in dose and fluence calculations can be improved by using tabulated cross sections. Benchmarking of shielding and irradiation effects of high energy protons in different materials relevant for shielding of accelerator facilities is also presented. In particular, we show that PHITS can be used for estimating the dose received by aircrews and personnel in space. In recent years, many countries have issued regulations or recommendations to set annual dose limitations for aircrews. Since estimation of cosmic-ray spectra in the atmosphere is an essential issue for the evaluation of aviation doses, we have calculated these spectra using PHITS. The accuracy of the atmospheric propagation simulation of cosmic-ray performed by PHITS has been well verified by experimental cosmic-ray spectra taken under various conditions. Based on a comprehensive analysis of the simulation results, an analytical model called “PARMA” has been proposed for instantaneously estimating the atmospheric cosmic-ray spectra below the altitude of 20 km. We have also performed preliminary simulations of long-term dose distribution measurements at the ISS performed with the joint ESA-FSA experiment MATROSHKA-R (MTR-R) led by the Russian Federation Institute of Biomedical Problems (IMBP) and the ESA supported experiment MATROSHKA (MTR), led by the German Aerospace Center (DLR). For the purpose of examining the applicability of PHITS to the shielding design in space, the absorbed doses in a tissue equivalent water phantom inside an imaginary space vessel has been estimated for different shielding materials of different thicknesses. The results confirm previous results which indicate that PHITS is a suitable tool when performing shielding design studies of spacecrafts.     

Fine Resolution Epithermal Neutron Detector (FREND) Onboard the ExoMars Trace Gas Orbiter

ExoMars is a two-launch mission undertaken by Roscosmos and European Space Agency. Trace Gas Orbiter, a satellite part of the 2016 launch carries the Fine Resolution Neutron Detector instrument as part of its payload. The instrument aims at mapping hydrogen content in the upper meter of Martian soil with spatial resolution between 60 and 200 km diameter spot. This resolution is achieved by a collimation module that limits the field of view of the instruments detectors. A dosimetry module that surveys the radiation environment in cruise to Mars and on orbit around it is another part of the instrument.This paper describes the mission and the instrument, its measurement principles and technical characteristics. We perform an initial assessment of our sensitivity and time required to achieve the mission goal. The Martian atmosphere is a parameter that needs to be considered in data analysis of a collimated neutron instrument. This factor is described in a section of this paper. Finally, the first data accumulated during cruise to Mars is presented.     

The OSIRIS-REx Visible and InfraRed Spectrometer (OVIRS): Spectral Maps of the Asteroid Bennu

The OSIRIS-REx Visible and Infrared Spectrometer (OVIRS) is a point spectrometer covering the spectral range of 0.4 to 4.3 microns (25,000–2300 cm^?1). Its primary purpose is to map the surface composition of the asteroid Bennu, the target asteroid of the OSIRIS-REx asteroid sample return mission. The information it returns will help guide the selection of the sample site. It will also provide global context for the sample and high spatial resolution spectra that can be related to spatially unresolved terrestrial observations of asteroids. It is a compact, low-mass (17.8 kg), power efficient (8.8 W average), and robust instrument with the sensitivity needed to detect a 5% spectral absorption feature on a very dark surface (3% reflectance) in the inner solar system (0.89–1.35 AU). It, in combination with the other instruments on the OSIRIS-REx Mission, will provide an unprecedented view of an asteroid’s surface.     

Detection of DNA damages and repair in human culture cells with simulated space radiation

DNA damages and its repair of cultured WI38 human fibroblast cells and T98G human glioblastoma cells were studied by exposing to carbon ion beams of HIMAC accelerator. The exposed cells were incubated at 37 °C for appropriate intervals and the damages were analyzed by alkaline comet assay and quantitative RT-PCR with p53 mRNA Highly inhomogeneous DNA damages were observed among the electrophoretic cell images of the comet assay. The degree of the damages was analyzed semi-quantitatively by using the Comet Index. The damaged fraction of WI38 cells was 85% immediately after 4 Gy (100 keV/μm) irradiation and decreased to 50% after 120 min. incubation indicating a repair of cell DNA. Time dependent p53 gene expression was also analyzed by the quantitative RT-PCR method.