一个飞机结构优化设计软件

本文根据有限元分析基础,研究薄壁结构在应力、位移、最小尺寸约束下结构最轻重量的优化设计问题。用Kuhn-Tucker(库恩-塔克)必要条件将多个位移约束简化为单一位移约束(称为最临界位移约束),建立位移约束下的优化设计准则.从而避免大批拉格朗日乘子的计算,并结合满应力优化设计准则,形成了在有效约束界面逐步逼近最优设计点的方法——包络法。用某型飞机后机身一段优化设计作为本文的实际应用,得到令人满意的结果。     

应用聚类分析对关联规则进行分组

关联规则是要从大量的数据中找到数据之间的规律，但有时所产生的规律十分繁多，从而形成新的知识管理问题。针对该问题本文提出了一个新的算法，该算法利用系统聚类分析方法对规则进行分组，从而可更好地帮助用户解所发现的规律，该方法的距离（RatioD）是基于关联规则本身，因此，可对规则进行高效地分组。实验结果表明，该算法是有效的。     

分集接收机鉴相算法研究与设计

从介绍分集接收机的基本工作原理入手,着重论述分集接收机中差模环的两种鉴相算法,并给出两种算法在使用FPGA实现时的资源占用情况,最后介绍了两种算法在实际工程中的应用。     

星光折射航天器自主定轨方案比较

当星光透射大气发生折射时 ,用星光折射角精确地反映星光在大气中离地球表面的高度 ,并建立高度、航天器与地球的几何关系。通过对折射角进行观测 ,间接测得地平 ,从而改善了用地平仪直接测地平所造成的航天器自主导航精度低的不足。本文提出了几种利用星光折射的航天器自主定轨方案 ,并作了细致的仿真实验 ,对直接和间接两种测量地平方法以及几种星光折射自主定轨方案进行了分析比较。     

Ariane transfer vehicle in service of man in orbit

The Ariane transfer vehicle (ATV), an Ariane 5 borne, unmanned propulsion vehicle, is designed to transport the logistics needed to resupply the International Space Station (ISS) and the man tended free flyer (MTFF) step 2 with pressurized and unpressurized cargo and to dispose the waste. The ATV is an expendable vehicle and is disposed of by a safe atmospheric burn up. In accordance with the AR5 schedule it should be operational in 1996 for missions toward ISS and beyond the year 2000 for MTFF 2 missions. The main constituents of the proposed ATV are the modified AR5 third stage L5, an upgraded VEB steering the launcher as well as the ATV and the P/L-adaptor providing mechanical and umbilical links to the payload. The mechanical part of the RVD-kit will be placed on the payload-module, the main RVD sensors are located on the adaptor and the needed computer intelligence will be integrated on the VEB. To minimize the development, and recurring costs, the ATV concept fully complies to the idea of maximum use of existing hardware and software, mainly from the AR5, Hermes and Columbus programs thus minimizing development and recurring costs. The ATV is compatible to ISS, MTFF and OMV and is able to transport logistic modules compatible with NSTS and U.S.-expendable launchers.     

雷达数据处理系统中网络安全与管理分析

一、引言 雷达数据处理系统（RDP）是航管雷达系统中最为重要的组成部分之一。它的主要功能包括：飞行目标点迹处理、跟踪功能；目标冲突告警处理（STCA）和低高度告警处理（MSAW）；结合飞行计划报（FPL）数据完成航班自动化处理功能；完成视频显示功能以及多雷达数据综合处理功能。现代工程中的自动化处理系统已将雷达数据处理系统与终端显示系统合成。     

四喷管射流流场的数值模拟及分析

本文分析了ENO格式的特点，并应用于全NS方程的迁移项和压力项，模拟了三维射流，首先计算了四喷管射流干扰流场，给出了相应的计算结果，指出了其四股射流外部有形成类似一股射流波系的趋势，而内部四股射流始终存在并相互作用，且伴随流对内部干扰流场有重要影响；然后计算了四股射流流入圆管内的流场，给出了壁面和截面物理量的分布，分析了其拓扑结构。     

航天飞行器防热部件烧蚀行为的数值模拟

对航天飞行器防热部件在氧－煤油发动机火焰喷吹下的烧蚀行为进行了有限元数值模拟。利用“杀死”单元的方法建立防热部件瞬态温度场的有限元模型，实现了烧蚀边界的退缩，从而完成了对烧蚀尺寸变化的定量描述。烧蚀开始于4．59s，到12s时线烧蚀量为1．47mm。计算结果与试验的实测结果一致。     

LISA — a study of the ESA cornerstone mission for observing gravitational waves

The primary objective of the Laser Interferometer Space Antenna (LISA) mission is to detect and observe gravitational waves from massive black holes and galactic binaries in the frequency range 10⁻⁴ to 10⁻¹ Hz. This low-frequency range is inaccessible to ground-based interferometers because of the unshieldable background of local gravitational noise and because ground-based interferometers are limited in length to a few km. LISA is an ESA cornerstone mission and recently had a system study (Ref. 1) carried out by a consortium led by Astrium, which confirmed the basic configuration for the payload with only minor changes, and provided detailed concepts for the spacecraft and mission design. The study confirmed the need for a drag-free technology demonstration mission to develop the inertial sensors for LISA, before embarking on the build of the flight sensors. With a technology demonstration flight in 2005, it would be possible to carry out LISA as a joint ESA-NASA mission with a launch by 2010 subject to the funding programmatics. The baseline for LISA is three disc-like spacecraft each of which consist of a science module which carries the laser interferometer payload (two in each science module) and a propulsion module containing an ion drive and the hydrazine thrusters of the AOCS. The propulsion module is used for the transfer from earth escape trajectory provided by the Delta II launch to the operational orbit. Once there the propulsion module is jettisoned to reduce disturbances on the payload. Detailed analysis of thermal and gravitational disturbances, a model of the drag-free control and of the interferometer operation confirm that the strain sensitivity of the interferometer will be achieved.     

固体发动机喷管烧蚀和温度场测量

介绍了含铝复合推进剂发动机试验时,对其喷管进行的烧蚀和温度场测量,获得了复合喷管结构中的烧蚀和瞬时温度分布.