低温泵常见故障分析及其解决措施

文章对低温泵运行过程中所发生的冷头及氦压缩机典型故障进行了原因分析,并提出了解决措施。最后提出了使低温泵可靠稳定运行的建议。     

Influence of lunar topography on simulated surface temperature

The surface temperature of the Moon is one of the essential parameters for the lunar exploration, especially to evaluate the Moon thermophysical features. The distribution of the temperature is heavily influenced by the Moon topography, which, however, is rarely studied in the state-of-art surface temperature models. Therefore, this paper takes the Moon topography into account to improve the surface temperature model, Racca model. The main parameters, such as slopes along the longitude and latitude directions, are estimated with the topography data from Chang’E-1 satellite and the Horn algorithm. Then the effective solar illumination model is then constructed with the slopes and the relative position to the subsolar point. Finally, the temperature distribution over the Moon surface is obtained with the effective illumination model and the improved Racca model. The results indicate that the distribution of the temperature is very sensitive to the fluctuation of the Moon surface. The change of the surface temperature is up to 150 K in some places compared to the result without considering the topography. In addition, the variation of the surface temperature increases with the distance from the subsolar point and the elevation, along both latitude and longitude directions. Furthermore, the simulated surface temperature coincides well with the brightness temperature in 37 GHz observed by the microwave sounder onboard Chang’E-2 satellite. The corresponded emissivity map not only eliminates the influence of the topography, but also hints the inherent properties of the lunar regolith just below the surface. Last but not the least, the distribution of the permanently shadowed regions (PSRs) in the lunar pole area is also evaluated with the simulated surface temperature result.     

150kV/30kW逆变式电子束焊接高压电源设计

针对150kV/30kW电子束焊接高压电源高电压、大功率输出的要求,低压电路采用IGBT (Insulated Gate Bipolar Transistor)逆变隔离直流电源与逆变全桥串联的主电路拓扑,高压电路由3组升压变压器与10倍压整流电路的串联结构并联组成;设计了高压采样电路、束流采样电路,以及双闭环控制电路.基于上述技术,实现了150kV/30kW高电压大功率输出.实验结果表明高压加速电源的输出线性度和束流输出线性度较好,同时高压稳定度和束流稳定度均在0.5%左右,能够满足电子束焊接的要求.     

摄影测量技术及其在航天器变形测量中的应用

文章介绍了摄影测量技术的测量原理,系统调研了近年来摄影测量技术在国内外航天器变形测量领域的发展概况,分析总结了该技术的发展趋势和关键技术,并结合我国的具体国情提出了当前变形测量技术发展的建议,为我国在航天器大型复杂部件微变形测量技术的发展提供借鉴和参考。     

弹道导弹突防中的电子防护效能研究

分析了弹道导弹突防中的电子战威胁环境。针对弹道导弹突防阶段可能遭受的电子攻击模式,提出了相应的电子防护措施,并对防护措施的可行性和有效性进行分析和讨论。提出了弹道导弹突防阶段电子防护效能的概念,建立了电子防护效能评估指标体系,在此基础上建立了一系列电子防护效能评估模型。     

Dynamics and control of spacecraft hovering using the geomagnetic Lorentz force

To achieve hovering, a spacecraft thrusts continuously to induce an equilibrium state at a desired position. Due to the constraints on the quantity of propellant onboard, long-time hovering around low-Earth orbits (LEO) is hardly achievable using traditional chemical propulsion. The Lorentz force, acting on an electrostatically charged spacecraft as it moves through a planetary magnetic field, provides a new propellantless method for orbital maneuvers. This paper investigates the feasibility of using the induced Lorentz force as an auxiliary means of propulsion for spacecraft hovering. Assuming that the Earth’s magnetic field is a dipole that rotates with the Earth, a dynamical model that characterizes the relative motion of Lorentz spacecraft is derived to analyze the required open-loop control acceleration for hovering. Based on this dynamical model, we first present the hovering configurations that could achieve propellantless hovering and the corresponding required specific charge of a Lorentz spacecraft. For other configurations, optimal open-loop control laws that minimize the control energy consumption are designed. Likewise, the optimal trajectories of required specific charge and control acceleration are both presented. The effect of orbital inclination on the expenditure of control energy is also analyzed. Further, we also develop a closed-loop control approach for propellantless hovering. Numerical results prove the validity of proposed control methods for hovering and show that hovering around low-Earth orbits would be achievable if the required specific charge of a Lorentz spacecraft becomes feasible in the future. Typically, hovering radially several kilometers above a target in LEO requires specific charges on the order of 0.1 C/kg.     

基于球几何特征的摄像机内参分步标定方法

在摄像机标定过程中,球形靶标对图像数量、拍摄角度要求小,能够适应遮挡环境,在使用中具有明显优势.在分析球投影模型几何性质的基础上,提出一种利用球靶标分步标定摄像机内部参数的方法.该方法通过拍摄一幅包含空间中2个不同位置球体的图像,得到图像中的2条投影二次曲线;利用2条投影二次曲线的对称轴和公切线计算球心投影点,通过投影二次曲线的对称轴确定图像主点坐标,根据球心投影点和图像主点的位置关系求解归一化焦距;利用整体优化算法得到内参标定结果.仿真数据实验分析了引入测量误差的主要因素,实物标定结果与平面方格靶标方法相比误差在5%之内,重复测量结果稳定.      

火箭发动机气体-颗粒两相流双流体模型研究

探讨了两相流双流体模型中颗粒相压强、两相界面压强以及两相界面速度等若干关键问题,从理论上推导了双流体模型的控制方程,并讨论了颗粒相控制方程的双曲性.把LU隐式时间格式和Van-Leer矢通量分裂格式应用到两相流双流体模型中,并对一维等截面传热摩擦管道和轴对称JPL喷管中气固两相流进行了计算,计算结果与文献结果吻合良好,所建数学模型正确,所用数值计算方法可靠.     

基于抗噪声ICA的高光谱数据特征提取方法

特征提取是高光谱数据应用的一个重要环节,用于将高光谱数据中具有特殊性质的地物分离出来并去除冗余信息.提出了一种使用独立成分分析(ICA,Independent Component Analysis)进行高光谱遥感地物特征提取的方法.为了解决ICA对噪声过分敏感的问题,采用最大噪声分量(MNF,Maximum Noise Fraction)算法替代传统的主成分分析对数据作降噪处理,由MNF引出的不完全独立成分分析(UICA,Undercomplete ICA)在不牺牲特征提取能力的情况下能够获得很高的运算效率.给出了HYDICE和PHI的数据试验结果,分别测试了算法在时间效率和特征提取能力方面的性能,证明了该算法具有预期的性能.     

五轴连续纤维3D打印机及其数控系统开发

为了解决传统三轴连续纤维3D打印复杂轨迹精确成型困难的问题,设计搭建了五轴连续纤维3D打印机,该3D打印机具有5个联动轴(XYZBC)以及1个树脂螺杆挤出装置辅助轴.针对典型的3D打印控制方案存在可联动轴数少、可扩展性差、实时性差等问题,对全软件型开放式数控系统进行了研究,并将其应用于连续纤维增材制造领域.基于开源数控...