空空导弹惯性开关中圆周磁场对导弹性能的影响

为了提高空空导弹的作战效能和可靠性,由弹载电源向开关电路进行大电流放电,可提高惯性开关中圆柱电极上周磁场的强度,增强抵抗磁钢对钢珠反向作用力的能力,当导弹撞击目标过载较小时,使惯性开关的导通时间也能够满足触发电路工作需要,因此,导弹遇目标不炸的故障概率可得到下降。     

电大目标等离子体隐身的矩量法优化设计

根据高频散射特征,提出典型几何散射中心替代法,用于解决矩量法（MOM）用于电大目标等离子体隐身时的优化设计问题。以某典型电大目标为例,通过仿真分析了该方法的可行性。结果显示,电大目标覆盖利用该方法得到最优参数的等离子体后,不仅目标整体的单站RCS平均缩减与典型几何散射体的单站RCS缩减相当,且任意方向上RCS基本都有10dB左右的缩减,表明用该方法得到用于电大目标隐身的等离子体参数是可行的。     

大直径铝合金铆钉以铆代螺可行性试验研究

针对双层铝合金板铆接结构,通过电磁铆接工艺试验,分析Φ10mm-2A10铝合金铆钉镦头的微观组织,与钢质螺栓连接接头对比评价了铆接接头的力学性能。研究发现,随放电电压的增加,铆钉镦头直径逐渐增加、高度逐渐降低。铆钉镦头以绝热剪切为主要变形模式。铆接接头的最大剪切和拉脱载荷分别为23.3k N和35.0k N,均高于钢质螺栓连接接头,并且相对于螺接接头可减重15.8%。     

Eliminating negative VTEC in global ionosphere maps using inequality-constrained least squares

Currently, ground-based Global Navigation Satellite System (GNSS) stations of the International GNSS Service (IGS) are distributed unevenly around the world. Most of them are located on the mainland, while only a small part of them are scattered on some islands in the oceans. As a consequence, many unreasonable zero values (in fact negative values) appear in Vertical Total Electron Content (VTEC) of European Space Agency (ESA) and Center for Orbit Determination in Europe (CODE) IONEX products, especially in 2008 and 2009 when the solar activities were rather quiet. To improve this situation, we directly implement non-negative physical constraints of ionosphere for global ionosphere maps (GIM) with spherical harmonic functions. Mathematically, we propose an inequality-constrained least squares method by imposing non-negative inequality constraints in the areas where negative VTEC values may occur to reconstruct GIM models. We then apply the new method to process the IGS data in 2008. The results have shown that the new algorithm efficiently eliminates the unwanted behavior of negative VTEC values, which could otherwise often be seen in the current CODE and ESA GIM products in both middle and high latitude areas of the Southern Hemisphere (45°S∼90°S) and the Northern Hemisphere (50°N∼90°N). About 64% of GPS receivers’ DCBs have been significantly improved. Finally, we compare the GIM results between with and without the inequality constraints, which has clearly shown that the GIM result with inequality constraints is significantly better than that without the inequality constraints. The inequality-constrained GIM result is also highly consistent with the final IGS products in terms of root mean squared (RMS) and mean VTEC.     

两种质量多元诊断理论(英文)

工厂中,多工序、多指标系统是常见的。在该系统中推行质量控制与诊断必须考虑下列两点：上工序对下工序的影响以及指标间的相关性。由于这两点是同时存在的,使得问题更加复杂。我们需要应用张公绪教授在１９９６年提出的两种质量多元诊断理论来解决此复杂问题。本文介绍了其基本原理和具体应用,实际应用结果与理论是一致的。     

GNSS Satellite Autonomous Integrity Monitoring (SAIM) using inter-satellite measurements

Integrity is the ability of Global Navigation Satellite Systems (GNSS) to detect faults in measurements and provide timely warnings to users and operators when the navigation system cannot meet the defined performance standards, which is of great importance for safety of life critical applications. Compared with both Receiver Autonomous Integrity Monitoring (RAIM) and ground based GNSS Integrity Channel (GIC) methods which are widely adopted nowadays, the Satellite Autonomous Integrity Monitoring (SAIM) method can be used to monitor orbit/ephemeris and clock errors, and has advantages in monitoring orbit and clock quality and providing instantaneous responses when faults happen.     

SGCMG框架伺服系统动力学建模与低速控制

单框架控制力矩陀螺(SGCMG)框架伺服系统内部存在的各种干扰会严重影响陀螺的力矩输出精度。为了实现力矩输出的高精度控制,需要对框架伺服系统进行精确动力学建模与控制。通过对作用于航天器上SGCMG的详细动力学分析,建立了框架伺服系统动力学模型,其中考虑了动静不平衡干扰力矩以及摩擦力矩。基于正弦永磁同步电机,利用自抗扰理论设计了框架伺服系统内外环控制器。仿真结果表明,在忽略转子不平衡所引起的高频干扰力矩的前提下,此控制器能对内外环存在的所有建模及未建模干扰进行准确估计和补偿,保证了框架的高精度控制。通过仿真还得到了转子不平衡对框架控制精度的影响量级,将为进一步研究如何抑制不平衡振动提供参考依据。     

从美军"PTN"项目看前沿技术在飞行员训练体系中的应用前景

美国空军教育和训练司令部"PTN"项目即"未来飞行员训练计划"已经完成两期验证,项目重点集成了虚拟现实、增强现实、先进生理传感器、人工智能和大数据分析技术,研究了新技术对飞行员训练的适用性.项目取得了良好的效果,美军计划将该项目作为未来飞行员训练体系的重要组成部分.本文分析了"PTN"项目的 组织实施过程和实施效果,阐述了人工智能、虚拟现实、大数据等前沿技术在飞行员培训体系中的应用前景.     

2024铝合金浸镍层的制备及生长过程

利用磷酸的全面腐蚀特性和氯离子的活化作用,设计了磷酸-氯化镍浸镍反应体系,通过表面电位监测及微观形貌表征对不同磷酸浓度与反应温度下的浸镍过程进行分析。结果表明:磷酸浓度是影响浸镍层表面电位及微观形貌的关键因素,当磷酸浓度为25%,反应温度为30℃时,可制得化学性质稳定、包覆性良好且晶粒尺寸均匀的浸镍层。在此反应体系下,浸镍层在形核后通过球状方式叠层生长,在反应进行600 s后得到厚度约1 μm的浸镍层,其表面电位可达到-0.51 V左右。