超声速气流中横向射流雾化实验和数值模拟

为了对超声速气流中的横向射流雾化过程进行研究,在直连式实验台上进行了超声速气流中的横向射流雾化实验,并对实验工况进行了数值模拟.超声速来流的马赫数为2,实验喷雾的动压比范围为1.～11.7,实验工质为水.采用纹影法对射流雾化过程进行了拍摄,得到了有雾化的超声速流场结构和穿透深度拟合公式.同时采用欧拉-拉格朗日两相流计算方法对实验工况进行了数值模拟,雾化模型采用了一种新型K-H(Kelvin-Helmholtz)和R-T(Rayleigh-Taylor)混合模型,数值模拟与实验结果符合较好.      

电动力缆绳离轨系统中绳索建模研究

 空间碎片对在轨运行航天器的安全构成重大威胁,使废弃卫星脱离原轨道进入大气层烧毁是减少空间碎片的有效途径。利用导电缆绳与地磁场相互作用产生的洛仑兹力使卫星特别是低地球轨道卫星的轨道高度快速衰减是一种很有应用前景的离轨方式。在研究电动力缆绳离轨的刚性杆模型基础上,建立了更符合电动力缆绳特性的柔索模型,并对刚性杆模型和柔索模型进行仿真。结果表明柔索模型能更精确地体现电动力缆绳的性质。     

小推力航天器的地月低能转移轨道

 在限制性四体模型下研究基于小推力方式的地月低能转移问题,通过借助于平动点轨道的相空间结构来揭示小推力转移的机理。重点研究了小推力转移自由飞行段的构造：经由LL₁点穿越获得最小能量的低能转移;而经由LL₁点Halo轨道穿越,得到(M,N)圈穿越轨道;由于Halo轨道相对于平动点增加了一维度的选择,根据(2,2)圈穿越轨道构造该转移的自由飞行段。在地球势阱逃逸和月球势阱捕获段,分别设计了合适的小推力的控制律及发动机开/关机时间,成功实施近地球段的小推力加速和近月球段的减速。尽管未对所得到的结果进行优化,所得转移轨道的燃料消耗也与类似边界条件的SMART-1轨道基本一致。     

Aviation-oriented Micromachining Technology-Micro-ECM in Pure Water

This article proposes a precise and ecofriendly micromachining technology for aerospace application called electrochemical machining in pure water （PW-ECM）. On the basis of the principles of water dissociation, a series of test setups and tests are devised and performed under different conditions. These tests explain the need for technological conditions realizing PW-ECM, and further explore the technological principles. The results from the tests demonstrate a successful removal of electrolytic slime by means of ultrasonic vibration of the workpiece. To ensure the stability and reliability of PW-ECM process, a new combined machining method of PW-ECM assisted with ultrasonic vibration （PW-ECM/USV） is devised. Trilateral and square cavities and holes as well as a group of English alphabets are worked out on a stainless steel plate. It is confirmed that PW-ECM will be probably an efficient new aviation precision machining method.     

Morphology and Frictional Characteristics Under Electrical Currents of Al203/Cu Composites Prepared by Internal Oxidation

Two AhO3/Cu composites containing 0.24 wt.% A1203 and 0.60 wt.% A1203 separately are prepared by internal oxidation.Effectsof sliding speed and pressure on the fi-ictional characteristics of the composites and copper against brass are investigated and compared.The changes in morphology of the sliding surface and subsurface are examined with scanning electron microscope (SEM) and energy dispersive X-ray spectrum (EDS).The results show that the wear resistance of the AI203/Cu composites is superior to that of copperunder the same conditions.Under a given electrical current,the wear rate of AI203/Cu composites decreases as the AleO3-content increases.However,the wear rates of the Al203/Cu composites and copper increase as the sliding speed and pressure increase under drysliding condition.The main wear mechanisms for AleO3/Cu composites are of abrasion and adhesion;for copper,it is adhesion,although wear by oxidation and electrical erosion can also be observed as the speed and pressure rise.     

硅橡胶基防热涂层动态烧蚀行为及机理研究

针对两种典型硅橡胶基防热涂层开展高温燃气流烧蚀实验，通过对烧蚀后涂层的宏观及微观形貌分析，探讨了其防隔热机理及烧蚀模型。研究结果表明：烧蚀后两种涂层均存在液态层、陶瓷层、热解层以及原始层；烧蚀过程中甲基苯基硅橡胶涂层主要发生主链“回咬”成环反应，导致树脂基体交联密度降低，力学性能下降，涂层外表面发生开裂，甲基乙烯基硅橡胶涂层则主要发生侧基交联反应，使树脂基体交联密度上升，促进涂层发生陶瓷化转变；热辐射、热容吸热、热解反应吸热以及热阻塞效应为四种主要的热耗散机制，质量损失产生的原因主要包括反应气体释放以及气动剪切力导致的机械剥蚀。     

对我公司开发民用产品的几点思考

分析了南飞公司民品开发中存在的问题及其产生原因；提出开发民品的对策和措施；探讨了开发民品的几种方法及应做好的几项基础工作。     

断裂韧性可靠性分析的相似计算法

根据断裂力学原理，动用相似理论求出断裂韧性ＫＩＣ〉ＧＩＣ，ＪＩＣ和δＣ之间的相似指标，然后利用正态函数的加法定理，对断裂韧性分散性进行相似计算，从而可以根据已知的断裂韧性随机信息，对难以求解或未知的其它断裂韧性参数进行可靠性分析和推断。计算介绍了一些实际应用。