直升机后缘襟翼驱动器迟滞现象仿真与抑制

直升机后缘襟翼多采用压电驱动器作为驱动元件，但是在使用过程中压电驱动器迟滞会对其振动控制性能产生不利影响，因此针对压电驱动器迟滞开展了迟滞建模与抑制研究。通过实验研究了压电驱动器在不同驱动频率下的迟滞特性，采用Bouc-Wen模型对驱动器迟滞现象进行了建模，并采用粒子群算法（PSO）辨识模型参数，与实际测量迟滞曲线进行了对比，在10~60 Hz范围内所建立的迟滞模型能够较为精确地描述压电驱动器迟滞现象。建立了基于Bouc-Wen逆模型的前馈补偿控制与PID反馈控制相结合的复合控制策略，实验结果显示该控制策略能够在10~60 Hz较宽的频率范围内有效抑制该压电驱动器迟滞现象。建立了考虑驱动器迟滞的主动控制后缘襟翼振动控制动力学模型，并对中等速度稳态前飞条件下后缘襟翼振动控制性能进行了仿真，仿真结果显示驱动器迟滞会在一定程度上削弱振动控制性能，而采用复合控制可以提高后缘襟翼旋翼振动控制性能。     

考虑输入饱和的固定翼无人机自适应增益滑模控制

针对复杂环境下的固定翼无人机飞行控制问题，考虑输入饱和以及复杂外界干扰的影响，提出一种基于自适应滑模控制方法的固定翼无人机飞行控制策略。首先，对固定翼无人机模型进行介绍，将模型分为姿态子系统和速度子系统；其次，针对姿态子系统和速度子系统的特点以及控制需求，分别采用自适应多变量螺旋滑模和自适应快速超螺旋滑模设计姿态控制器和速度控制器，该策略无需设计干扰观测器对外界干扰进行估计，仍然可以实现固定翼无人机对姿态参考指令和速度参考指令的有限时间精确跟踪，并基于Lyapunov的稳定性分析方法证明了闭环系统的稳定性。最后，对本文所提出的控制策略进行了仿真验证，结果表明该控制策略具有良好的控制性能。     

基于有限Fourier级数的航天器转移轨迹设计

针对航天器小推力转移轨迹的初始设计问题，利用基于三阶Fourier级数的设计方法实现了航天器小推力的多圈转移。同时，基于有限Fourier级数的形状法，对具有多个约束条件的小推力多圈转移轨迹进行了优化设计。选取了共面同轴同偏心率的初始和末端轨道位置，对所提出的方法进行了仿真验证。结果表明：与改进逆五阶多项式形状法相比，所提出的方法虽然增加了转移时间，但当转移圈数为5圈、有限Fourier级数的项数为10时，可减少将近75%的转移速度增量，同时大大减小了所需的最大推力加速度的值。     

A holistic approach to SIM platform and its application to early-warning satellite system

This study proposes a new simulation platform named Simulation Integrated Management (SIM) for the analysis of parallel and distributed systems. The platform eases the process of designing and testing both applications and architectures. The main characteristics of SIM are flexibility, scalability, and expandability. To improve the efficiency of project development, new models of early-warning satellite system were designed based on the SIM platform. Finally, through a series of experiments, the correctness of SIM platform and the aforementioned early-warning satellite models was validated, and the systematical analyses for the orbital determination precision of the ballistic missile during its entire flight process were presented, as well as the deviation of the launch/landing point. Furthermore, the causes of deviation and prevention methods will be fully explained. The simulation platform and the models will lay the foundations for further validations of autonomy technology in space attack-defense architecture research.     

航天器近距离交会的固定时间终端滑模控制

针对航天器近距离交会段的位置姿态耦合控制问题，假设航天器受外界干扰且目标航天器存在空间自由翻滚情形时，基于固定时间概念设计了一种六自由度位姿终端滑模自适应控制器，通过引入显含正弦函数的切换项来避免奇异问题。此外所设计的控制器含双幂次项，不仅能全局提高姿态和位置的跟踪速度及精度，还能估计系统稳定所需的时间上界，且该上界与状态初始值无关。基于Lyapunov方法分析了闭环系统的固定时间稳定性。仿真结果表明，该控制器能快速实现对航天器近距离交会时相对位置和姿态的控制，具有较高的精度和良好的干扰抑制能力。     

Stability of relative equilibria of the full spacecraft dynamics around an asteroid with orbit–attitude coupling

The full dynamics of spacecraft around an asteroid, in which the spacecraft is considered as a rigid body and the gravitational orbit–attitude coupling is taken into account, is of great value and interest in the precise theories of the motion. The spectral stability of the classical relative equilibria of the full spacecraft dynamics around an asteroid is studied with the method of geometric mechanics. The stability conditions are given explicitly based on the characteristic equation of the linear system matrix. It is found that the linearized system decouples into two entirely independent subsystems, which correspond to the motions within and outside the equatorial plane of the asteroid respectively. The system parameters are divided into three groups that describe the traditional stationary orbit stability, the significance of the orbit–attitude coupling and the mass distribution of the spacecraft respectively. The spectral stability of the relative equilibria is investigated numerically with respect to the three groups of system parameters. The relations between the full spacecraft dynamics and the traditional spacecraft dynamics, as well as the effect of the orbit–attitude coupling, are assessed. We find that when the orbit–attitude coupling is strong, the mass distribution of the spacecraft dominates the stability of the relative equilibria; whereas when the orbit–attitude coupling is weak, both the mass distribution and the traditional stationary orbit stability have significant effects on the stability. We also give a criterion to determine whether the orbit–attitude coupling needs to be considered.     

TEC differences for the mid-latitude ionosphere in both sides of the longitudes with zero declination

Based on measurements of ground-based GPS station network, differences of the mid-latitude ionospheric TEC in the east and west sides of North America, South America and Oceania have been analyzed in this paper. Results show that for nearly all seasons from 2001 to 2010 and in both sides of the longitudes with zero declination, there exist systematic differences for the mid-latitude ionospheric TEC in the regions mentioned above and the features of these differences markedly depend upon the local time but less depend upon seasons and the level of solar activity. Theory analysis shows that the longitude variations of both declination and zonal thermospheric winds are one of important factors to cause differences of the mid-latitude ionospheric TEC in both sides of the longitudes with zero declination.     

改革开放以来我国社会管理思想的发展脉络及评述

改革开放以来,市场经济使国家和社会的关系发生了深刻变化,中国共产党在治国理政的过程中,不断探索和调整适合我国国情和发展需要的社会管理理念、方式和决策机制。从十一届三中全会至今,历次党代会上中国共产党都对社会管理都有新的认识、新的提法和新的部署,反映了党在不断探索和调试的过程中,在理论和实践的互动中社会管理思想的逐步形成。     

海洋大气环境下微动开关触点回跳时间增大故障的试验复现与分析

结合某型微动开关触点回跳时间增大导致某系统故障问题,设计了由干湿交替酸性盐雾试验和湿热试验组成的海洋大气环境效应加速模拟试验剖面,选取与外场故障件型号一致的微动开关为研究对象,通过实验室加速模拟试验,成功复现了外场故障现象,并结合试验结果对腐蚀性环境、电烧蚀等因素对触点回跳时间增大的影响机制进行了分析。     

MR螺纹在修理过程及型号研制中的应用问题

读了《航空标准化与质量》１９９９年第１期胡富同志撰写的《ＭＲ螺纹在修理过程中的应用探讨》一文,笔者认为该文较全面分析了ＭＲ螺纹和ＭＪ螺纹之间的关系以及与普通螺纹之间的连带关系,同时还在综述中明确指出了：“ＭＲ螺纹和ＭＪ螺纹的大径和中径相同,小径和外螺纹牙底圆弧半径只有很小的差异,因此ＭＲ螺纹与ＭＪ螺纹可以互换,且不会产生干涉,也不会改变配合性质。因此ＭＲ螺纹的加工和检验可以使用与其公差带相同的ＭＪ螺纹的加工工具和检验工具”。但又提出：在修理过程中,ＭＲ螺纹不能用国军标ＭＪ螺纹替代,其理由是：“Ｍ…