Ionospheric F2-Layer critical frequency retrieved from COSMIC radio occultation: A statistical comparison with measurements from a meridional ionosonde chain over Southeast Asia

In this paper, we compared the F2-Layer critical frequency (foF2) derived from FORMOSAT-3/COSMIC radio occultation (RO) and ionosondes at Chiang Mai, Chumphon and Kototabang during the years 2008–2015 to evaluate the performance of COSMIC RO over Southeast Asia region. The results show that the time development of foF2 values derived from COSMIC RO generally agrees well with those from ionosonde measurements. However, the differences between the foF2 derived from COSMIC RO and that derived from ionosonde observations display latitudinal dependence. COSMIC RO tends to underestimate foF2 at Chiang Mai and Kototabang, which is near to the north EIA crest and the south one, respectively, while a little overestimate foF2 at Chumphon, which is close to the geomagnetic equator. COSMIC RO agrees best with ionosonde at Chumphon and worst at Chiang Mai. At each ionosonde station, the quality of COSMIC RO data degrades with the increase of solar activity. In addition, at the station Chiang Mai and Kototabang, COSMIC RO performs better in summer than in equinox and winter. Furthermore, the differences in foF2 derived from COSMIC RO and that from ionosonde measurements vary with local time, i.e., the differences in foF2 are generally smaller at night and larger in noontime when equatorial ionization anomaly (EIA) is well developed.     

任务型教学法的任务设计

任务型教学法是新兴的一种强调“在做中学”(learning by doing)的语言教学方法，是我国外语课程教学改革的一个走向，吸收了以往多种教学法的优点而形成。任务是任务型教学法中一个重要概念。要使任务型教学法更好地发挥作用，任务的设计就显得尤为重要。在任务设计中，要注意任务与人本主义、任务与文化性、任务与教师角色之...     

A regional tropospheric model for airborne GPS applications

A regional tropospheric model can be constructed using surveys from GPS ground networks. Using this model the tropospheric delays of a kinematic station within the region can be interpolated. However, such a model is generally not suitable for an airborne platform high above the ground networks. In this paper, a method of constructing a regional tropospheric model for airborne GPS applications is described. First, the kinematic station in the air is projected onto the ground. Then the tropospheric delays at projected point are interpolated from those of the ground networks. Finally, the tropospheric delays at projected point are extended upward to the airborne platform using pressure and temperature gradients and humidity exponential function. For validation of this method, the data of airborne campaign carried out by BKG in cooperation with GFZ and BGR 2008 in the northern Alps are used. The results show that GPS kinematic positioning precision in height component can be improved using this method.     

考虑轴向变形的锥形轮盘低循环疲劳试验研究

某型发动机高压压气机Ⅰ级盘采用锥形结构,在装配预紧力和离心载荷的作用下产生轴向变形。为了考核该轮盘的低 循环疲劳寿命,在传统轮盘低循环疲劳试验技术的基础上,提出了1 种考虑轴向变形条件的锥形轮盘低循环疲劳寿命试验方法。 针对轮盘结构与装配要求,计算分析工作状态下的轴向变形,优化设计了能够有效考核轮盘关键部位寿命的试验件、陪试件及试验 工装,对比试验件在整机与试验器状态的应力水平,并在卧式旋转试验器上完成了试验件的低循环疲劳试验。试验结果表明：采用 该方法可对高压Ⅰ级盘安全循环寿命进行有效考核。     

轴对称双喉道流体控制矢量喷管三维数值模拟

对轴对称双喉道流体控制矢量喷管的流场进行了数值模拟,研究了喷管气动参数(主、次流落压比)对其内特性(流量系数、推力系数、推力矢量角和推力矢量效率)的影响,并与试验数据进行了对比.研究结果表明,在计算工况下,当喷管次流流量比恒定时,喷管推力矢量角随主流落压比的升高而降低,喷管流量系数和推力系数先是随主流落压比的升高而升高,在某-主流落压比时达到最大值,而后喷管推力系数随主流落压比的升高逐渐降低,流量系数则基本维持不变.当喷管主流落压比固定时,随着次流落压比的升高,推力矢量角也随之增加,推力系数无明显变化,而流量系数则呈下降趋势.     

基于瞬态液晶测量技术的收缩-扩张形孔

采用一种进行全表面测量的瞬态液晶测量技术测量了新型气膜孔(收缩-扩张形孔)的气膜冷却特性,研究了动量比对冷却效率和换热系数的影响,并与传统的圆柱形孔气膜冷却特性进行了对比,结果表明:收缩-扩张形孔中心线附近区域的冷却效率相对较低,而两孔之间区域的冷却效率相对较高,与圆形孔分布规律相反;在上游区域,两孔中间区域的换热系数比相对孔中心线附近区域较高,而在下游区域,两孔中间区域的换热系数比相对孔中心线附近又较低,与圆形孔相比也有较大不同。相对于圆柱形孔,收缩缝形孔的平均换热系数比在上游较高,在下游较低;收缩-扩张形孔喷出气膜对下游壁面区域的有效覆盖率远大于圆柱形孔,其展向平均冷却效率明显高于圆柱形孔;收缩-扩张形孔在动量比为2时的平均冷却效率最高。     

旋转对曲率表面气膜冷却效率影响的数值研究

通过对旋转状态下曲率通道的气膜冷却现象的流动和换热进行数值模拟,得到了不同旋转数下凸表面和凹表面的冷却效率分布。计算选用剪切应力输运(SST)湍流模型,主流雷诺数ReD=4 797,吹风比M=0.4,旋转数Rt=0~0.023 9。研究结果表明,旋转数对冷却效率的影响明显：旋转数的增大使得气膜的轨迹偏转越明显,并且凸表面上气膜轨迹的偏转程度高于凹表面的。凸表面的冷却效率随着旋转数的增加而逐渐减小,而凹表面的冷却效率随着旋转数的增加而递增,并且旋转数的增加会弱化凸表面和凹表面上冷却效率的差别。