Estimation of GPS instrumental biases from small scale network

With 4 GPS receivers located in the equatorial anomaly region in southeast China, this paper proposes a grid-based algorithm to determine the GPS satellites and receivers biases, and at the same time to derive the total electron content (TEC) with time resolution of 15 min and spatial resolution of 1° by 3.5° in latitude and longitude. By assuming that the TEC is identical at any point within a given grid block and the biases do not vary within a day, the algorithm arranges unknown biases and TECs with slant path TEC from the 4 receivers’ observations into a set of equations. Then the instrumental biases and the TECs are determined by using the least squares fitting technique. The performance of the method is examined by applying it to the GPS receiver chain observations selected from 16 geomagnetically quiet days in four seasons of 2006. It is found that the fitting agrees with the data very well, with goodness of fit ranging from 0.452 TECU to 1.914 TECU. Having a mean of 0.9 ns, the standard deviations for most of the GPS satellite biases are less than 1.0 ns for the 16 days. The GPS receiver biases are more stable than that of the GPS satellites. The standard deviation in the 4 receiver bias is from 0.370 ns to 0.855 ns, with a mean of 0.5 ns. Moreover, the instrumental biases are highly correlated with those derived from CODE and JPL with independent methods. The typical precision of the derived TEC is 5 TECU by a conservative estimation. These results indicate that the proposed algorithm is valid and qualified for small scale GPS network.     

A comprehensive numerical model investigating the thermal-dynamic performance of scientific balloon

The increase of balloon applications makes it necessary for a comprehensive understanding of the thermal and dynamic performance of scientific balloons. This paper proposed a novel numerical model to investigate the thermal and dynamic characteristics of scientific balloon in both ascending and floating conditions. The novel model consists of a dynamic model and thermal model, the dynamic model was solved numerically by a computer program developed with Matlab/Simulink to calculate the velocity and trajectory, the thermal model was solved by the Fluent program to find out the balloon film temperature distribution and inner Helium gas velocity and temperature field. These models were verified by comparing the numerical results with experimental data. Then the thermal and dynamic behavior of a scientific balloon in a real environment were simulated and discussed in details.     

基于边频相对能量和的柱塞泵磨损状态识别

摩擦磨损是飞机柱塞泵典型的渐进性故障,因磨损量难以直接测量,通常采用振动信号进行间接测量.磨损引起的振动信号故障特征微弱,对磨损状态进行准确地识别比较困难.针对上述问题,提出了基于谐波分量边频相对能量和的磨损状态识别方法,该方法对壳体振动信号进行Hilbert包络解调消除高频周期干扰,得到清晰的谐波分量,在各谐波分量的特定边频区间内计算最大能量与平均能量的比值并求和,将该值作为新的特征量来表征柱塞泵的不同磨损状态,利用网格法对边频区间范围寻优.结果表明,边频相对能量和相比传统的特征频率能量对磨损状态的区分度更高,适于磨损状态识别.      

端柱面组合密封气膜稳态特性数值仿真分析

针对航空发动机等高速流体机械中流体动密封部位的工况特点,提出一种新型的端柱面组合气膜密封形式.根据气膜密封的结构特点,建立了端柱面螺旋槽组合式密封气膜的数学分析模型.采用CFD分析软件Fluent对气膜三维流场模型以湍流流动形式进行数值模拟计算.研究了密封气膜几何结构参数变化对密封稳态特性（端面承载力F_d 、柱面承载力F_c 、泄漏量Q、摩擦转矩M）的影响.几何结构参数包括端面平均膜厚、端面槽深比、柱面平均膜厚、柱面偏心率、柱面槽深比、柱面槽宽比.      

网络分区中混合消息集传输模式的精确配置

针对分布式综合模块化航空电子网络分区方法,指出其对消息传输模式配置存在不确定性;通过形式化描述将问题转化为包括实时性约束、带宽约束、缓存约束的最优化问题;提出了基于遗传模拟退火的传输模式配置算法,以系统的消息端到端延迟均衡为优化目标.通过给出两个具体算例对算法有效性进行了验证,同时比较了本算法与传统遗传算法的性能.对比结果表明,本算法能够解决传输模式的配置问题,尽管计算时间较传统遗传算法高出18.1%,但所得到的适应度值高出28.7%.本算法为网络分区在实际航电系统中的应用提供了参考.     

基于分段化结构重建的2D/3D视频转换方法

为了缓解3D片源的不足,设计了一种分段化结构重建方法为视频2D/3D转换提供深度线索.采用分层提取的方式,将视频基于内容分解为子序列,在每个子序列中建立优化准则选择出处于非退化状态的关键帧,并以此为基础提出了分段化结构重建框架,利用改进的耦合自标定算法重构出每个子序列对应的离散3D结构信息,从而获取视频的深度线索.实验结果表明,该方法通过分段化后的局部优化,不仅使结构化重建能够有效处理多场景下的连续镜头,还加快了转换的效率,能够稳定、高效地获取深度信息,适用于视频2D/3D转换.      

分离式机械压汽蒸馏系统的实验

针对传统机械压汽蒸馏的不足,提出分离式机械压汽蒸馏系统.建立了一套容量为1.5 m3/d的单效分离式机械压汽蒸馏系统并对其进行实验研究.实验系统主要由两套旋转蒸发器、冷凝器以及压缩机组成.通过改变压缩机转速和蒸发温度来研究系统的性能.结果表明在蒸馏水产量一定的前提下压缩机进口压力和冷凝器进口压力随着压缩机转速的增加而逐渐下降,换热温差随着压缩机转速的增加而增加,最高温差稳定在8.5℃左右.通过改变系统的真空度获得不同的蒸发温度,蒸发温度越高,蒸馏产量越高,系统性能也越好.