关于Salomon假设的研究综述

高速切削技术在航空航天工业中应用广泛,取得了巨大的经济效益.Salomon假设作为金属切削领域一个著名的科学猜想,被认为是高速切削技术的发端.本文讨论了Salomon假设的起源,从理论研究、仿真分析和实验验证等方面总结了历史上学者对Salomon假设的研究成果,论述了Salomon假设的工程实践意义.结论认为Salomon假设实际上并未证实,其关于温度变化的假设成立与否应该取决于对切削温度的确切定义,而关于刀具磨损的假设已基本可以否定.最后展望了Salomon假设的未来研究趋势.     

滚珠丝杠螺距误差补偿法提高数控机床定位精度的研究

在详细论述、对比了实现数控机床滚珠丝杠螺距误差补偿的硬件、软件方法的原理基础上,对滚珠丝杠螺距误差软件补偿法可有效提高数控机床的定位精度进行了试验验证。     

H∞控制及其应用

本文叙述了Ｈ∞控制器设计的频域法和代数法，在频哉法中介绍了标准问题的模型匹配解法和丁谱分解法；在代数法中介绍了多项式法，直接状态空间法，最后简述了几个实际应用的例子。     

区域极点及方差约束下的航天器拦截控制：静态输出反馈情形

本文提出并讨论了具有选通窗约束的航天器拦截控制问题，指出航天器拦截控制的稳暂态性能指标可表现为系统稳态状态方差及闭环区域极点的形式。然后，基于配置控制的思想，本文完整地给出了期望静态反馈控制器的存在条件及其解析表达式，并举例说明所提设计方法的直接性与有效性     

如何为《飞机工程》撰写符合规范又有创新的论文

介绍了科技论文规范表达对收集、储存、处理、加工、检索、利用、交流和传播的作用，结合《飞机工程》投稿的实际，指出了作者在文字、标点、符号、图表、公式、量和单位表达中容易忽视和写错的一些技术细节，给出了科技论文规范表达的撰写格式，以及为《飞机工程》投稿时应注意的事项。     

碧水青山映古城——雨城雅安

雅安市坐落在四川省中部，位于四川盆地与青藏高原交接带。古为青衣羌国领地，汉代称雅州，名闻遐迩的川藏茶马古道以此为起点翻越莽莽群山逶迤西去，城边的蒙顶山是中国茶化的发祥地，憨态可掬的大熊猫也是从雅安山野里走向世界……此地自古就是多元化的交汇之所，也是地理意义上汉区与藏区和彝区的分水岭，高耸入云的大山将这里切割为迥然而异的化区和自然带，川流不息的青衣江荡涤着这座古风习习的昔日边城。     

无铅焊接在电路板接线柱的应用

利用无铅焊料具有较高熔点的温度特性,选用无铅焊料对电路板接线柱焊接,避免在接线柱上焊接导线时电路板焊点易受热熔化,接线柱产生下陷、歪斜等问题。通过可焊性、绝缘电阻测试、氯离子浓度检测、高低温实验、焊点拉脱力测试、振动试验等,介绍了无铅焊接在这种电路板接线柱应用中的各项工艺参数、手工焊接工具及无铅焊料的选择。     

Reconstructed 3-d magnetic field structure and hard X-ray two ribbons for 2000 Bastille-day event

The Bastille-day event in 2000 produced energetic 3B/X5.6 flare with a halo CME, which had great geo-effects consequently. This event has been studied extensively and it is considered that it follows the two-ribbon flare model. The flare/CME event was triggered by an erupting filament and TRACE observations showed formation of giant arcade structures during the flare process. Hard X-ray (HXR) two ribbons revealed for the first time in this flare event (Masuda et al., 2001). The reconstruction of 3-D coronal magnetic fields revealed a magnetic flux rope structure, for the first time, from extrapolation of observed photospheric vector magnetogram data and the flux rope structure was co-spatial with portion of the filament and a UV bright lane (Yan et al., 2001a, 2001b). Here we review some recent work related to the flux rope structure and the HXR two ribbons by comparing their locations and the flux temporal profiles during the flare process so as to understand the energy release and particle accelerations. It is proposed that the rope instability may have triggered the flare event, and reconnection may occur during this process. The drifting pulsation structure in the decimetric frequency range is considered to manifest the rope ejection, or the initial phase of the coronal mass ejection. The HXR two ribbons were distributed along the flux rope and the rope foot points coincide with HXR sources. The energy dissipation from IPS observations occurred within about 100 R _⋅ is consistent with the estimate for the flux rope system. This revised version was published online in August 2006 with corrections to the Cover Date.     

离心铸造Al—20wt%Si合金自生表面复合材料的组织与性能

采用热模金属型离心铸造Al－20wt％Si合金，获得了外层聚集粗大初晶Si、中层为共晶组织、内层聚集细小初晶Si的自生三层表面复合材料。考察了复合材料的组织形貌，检测了复合材料的硬度和耐性，分析了复合材料的断裂模式。     

卫星交会的自主导航技术

论述卫星交会自主导航的飞行任务背景和概念 ,综述国内外学者正在进行探索研究的思路 ,以期引起国内学者的的注意、探讨和深入研究。