非谐振单元加载的宽带超表面透镜天线设计

传统标准增益喇叭天线测试系统在测试物体的电磁特性时,由于要满足入射波为平面波的要求,通常要满足天线的远场条件,这样在测试过程中会产生绕射等现象,影响测试结果.通过在天线波导口处加载相位补偿的非谐振超表面单元可以改变电磁波的传播方向,使其在近场处也可以产生近似平面波的效果,可解决在测试过程中绕射等现象导致的测试结果不准确...     

燃烧室壁面鳞片型气膜孔流动与冷却机理分析

为了研究某型发动机燃烧室内的鳞片型气膜冷却孔流动及冷却机理,采用平板模型及燃烧室模型进行数值模拟研究,揭示鳞片型气膜冷却孔对燃烧室壁面冷却特性及燃烧特性的影响。结果表明:鳞片型气膜孔的鳞片结构有利于消除外卷对涡,增强气膜展向动量,具有较好的气膜冷却效率和展向覆盖特性;鳞片型气膜孔结构能有效降低冷气流量,提升冷却性能,应用鳞片气膜冷却孔的燃烧室壁面气膜冷却效果更优于应用平圆孔的;应用鳞片气膜冷却孔的燃烧室出口温度分布系数(Out let Temperat ure Di st r i but i on Fact or,OTDF)较低。     

基于小生境遗传自适应RBFN的歼击机故障认定方法

在模式识别领域中,如何实现更高精度的分类一直是个核心问题。本文提出了将自适应RBF神经网络与小生境遗传算法相结合的方法,其中自适应RBF神经网络通过对样本判断,自动实现对RBF网络添加新的隐层节点或者将样本归于已存在的隐层节点所属的类;小生境遗传算法用于寻找最优的网络宽度值。两者相结合最后确定一个隐层节点数与类别数相同的俭省的网络。用歼击机故障数据进行仿真,比较结果表明此方法能实现更高精度的故障认定。     

三维动态非结构重叠网格Navier-Stokes方程并行算法

 提出了一种三维动态非结构重叠网格Navier-Stokes(N-S)方程的并行计算方法。N-S方程的空间离散采用格点有限体积方法,时间离散采用隐式的双时间步长方法。应用一方程Spalart-Allmaras(S-A)模型来计算湍流黏性。并行计算采用动态的区域分裂方法,在每一物理时间步利用METIS网格分区系统对网格进行分区。为了实现各CPU之间的负载均衡,每块网格都按CPU个数进行分区并对活动节点和非活动节点进行了加权处理。最后,通过对外挂物投放无黏流动的数值模拟和内埋武器弹舱开启黏性流动的数值模拟,验证了该并行程序的准确性、高性能并行计算以及处理复杂几何外形的能力。     

Exploration and analysis of the factors influencing GNSS PWV for nowcasting applications

Precipitable water vapor (PWV) can be assimilated into a numerical weather model (NWM) to improve the prediction accuracy of numerical weather prediction. In this study, taking GNSS data for the Beijing Fangshan station (BJFS) as an example, based on the method of Pearson correlation coefficient combined with quantitative analysis, GNSS datasets are used to study the relationships between GNSS-derived PWV (GNSS PWV__Met) and its influencing factors, including the internal influencing factors zenith troposphere delay (ZTD), zenith hydrostatic delay (ZHD), zenith wet delay (ZWD), and surface temperature (T_s), and the external influencing factor haze (mainly PM_2.5). Firstly, based on the strong correlation between PWV__Met and ZTD hourly sequences from the International GNSS Service Network’s BJFS station for DOYS 182–212, 2015, the results of experiment prove that the reliability of GNSS ZTD is used to forecast PWV_Met in short-term forecasting. Secondly, based on hourly data of BJFS in 2016, the correlation between PWV__Met and ZTD, ZWD, ZHD, pressure (P) and T_s is analyzed, and then, with the rate of ZTD variation as the main factor, ZTD variation as auxiliary factor, the prediction success rate is 88.24% from hourly data of precipitation event for DOYs 183–213 in Beijing. The experiment indicates that ZTD can help forecast short-term precipitation. Thirdly, based on data from three hazy periods with relatively stable weather conditions, no heavy rainfall, and relatively continuous data in the past three years, the correlation between GNSS PWV_Met/ZTD and PM_2.5 hourly series is analyzed. The results of the experiments suggests that GNSS ZTD should be considered to assist in haze monitoring. So in the absence of radiosonde stations and meteorological elements, ZTDs on retrieval of GNSS stations have more application value in short-term forecast.     

Comparison of RO tropopause height based on different tropopause determination methods

The tropopause is an important boundary in the Earth’s atmosphere, and has been the subject of close attention from atmosphere and climate researchers. To monitor the global tropopause using radio occultation (RO) data, there are two primary methods, one is the widely used temperature lapse rate method, and the other is the bending angle covariance transform method which is unique to RO data. We use FengYun3-C (FY3C) and Meteorological Operational Satellite Program (MetOp) RO data and European Centre for Medium-Range Weather Forecasts (ECMWF) operational analysis data to determine differences in RO tropopause height calculated by these two methods. We compute biases of the RO lapse rate tropopause height (LRTH) and the RO bending angle tropopause height (BATH) relative to the ECMWF LRTH. The dependences of the tropopause height biases on tropopause height (TPH) retrieval method, latitude, season and RO mission are investigated. The results indicate that BATH show a consistent 0.8–1.2 km positive bias over the tropics and high latitude regions compared with LRTH, however, over 25° to 40° latitude in both hemisphere, BATH results are less stable. Furthermore, the mean bias between BATH and LRTH displayed a different symmetrical characteristic from 2017.12 to 2018.2 (DJF) compared to 2018.6–2018.8 (JJA). However, except for some bias over Antarctica, the mean value of both LRTH and BATH show a similar tropopause variation, indicating the consistency of both methods.     

柔性自适应桁架及其振动最优控制实验

基于dSPACE系统和所研制的锆钛酸铅(PZT)压电作动器,建立了第一阶频率低达5Hz的三棱柱自适应桁架实验平台,通过有限元建模和实验参数修正,利用异位加速度反馈信号进行了线性二次型Gauss(LQG)最优反馈控制实验和仿真.结果表明:对比无控状态,采用最优控制只需很小控制电压,可使桁架在低阶典型频率激励下的振幅降低90%以上;而当桁架受扰动后,振动衰减时间减少超过80%;验证了实验平台配置的合理性和所研制的PZT压电作动器、控制模型的有效性;控制数值仿真与实验在加控前后振幅抑制程度相同,控制仿真与实验中振幅衰减过程的差别通过激振过程仿真与实验的对比得到了阐明.     

微重力落塔试验技术及其应用（Ⅰ）

落塔试验是开展微重力研究的有效手段之一。本文研究落塔试验技术中最关键的问题之一：微重力水平的控制问题。     

High-temperature tribological behaviors of a Cr-Si co-alloyed layer on TA15 alloy

A Cr-Si co-alloyed layer was successfully deposited on TA15 alloy by the double glow plasma surface technology to improve its poor wear resistance at elevated temperature.The microstructure,composition,and phase structure of the layer were investigated by SEM,EDS,and XRD.The tribological behaviors of the Cr-Si co-alloyed layer at 20 ℃ and 500 ℃ were analyzed in details.The results indicated that the friction coefficient and wear rate of the Cr-Si coalloyed layer at 20 ℃ and 500 ℃ were much lower than those of the substrate,which was due to higher hardness and superior elastic modulus.This layer may become an approach to effectively improving the wear resistance of TA15 alloy at elevated temperature.