基于价值链的企业竞争优势构建

首先提出了衡量企业竞争优势有两大指标:"市场占有率"、"净资产收益率",指出获取企业竞争优势的工具是以作业为基础的"价值链";然后分别对"市场占有率"为基点的经营活动价值链和以"净资产收益率"为基点的财务活动价值链进行了分析,最后提出通过全面预算管理与平衡计分卡两项工具来执行与落实上述价值链,构建企业的竞争优势。     

航空电子系统FC交换式网络的可靠性研究

 对于采用光纤通道(FC)互连的航空电子系统,从FC的基本模型出发,给出了由多个FC交换机组成的FC交换式网络的通信模型;采用基于任务的可靠性建模方法,给出了FC交换式网络的可靠性计算公式,并提出了任务基本路径的概念。根据航空电子系统提高可靠性的需要,提出了FC交换式网络的2种冗余拓扑结构：基本路径冗余和全网络冗余;最后通过实例分析了端口单元、交换要素单元和链路单元对FC交换式网络及2种冗余拓扑结构可靠性的影响;FC交换式网络可靠性的研究对于航空电子系统设计阶段的容错设计和拓扑选择都将起到指导作用。     

Effects of Mo on the Microstructure and Hydrogen Sorption Properties of Ti-Mo Getters

The effects of Mo on the microstructure evolution, porosity and hydrogen sorption properties of Ti-Mo getters are investigated in this work. The results show that the addition of Mo prolongs the densification process of Ti-Mo getters and results in a significant amount of sintered pores. With the Mo content increasing, the porosity of getters firstly increases reaching the maximum value as it at- tains about 7.5wt.%, and then drops. At the room temperature, the hydrogen sorption property of getters increases progressively with the Mo content increasing, but the tendency is not very clear before its content lies below 2.5wt.%. When the Mo content achieves about 7.5wt.%, the hydrogen sorption property proves to be the best. The discussion is made about the above mentioned phenomena inclusive of hydrogen sorption properties of getters under different activation conditions (from 500-750 ℃).     

阳极化对航空铝合金疲劳性能的影响

采用S-N曲线研究硫酸阳极化、铬酸阳极化和硼酸硫酸阳极化对航空铝合金疲劳极限的影响.结果表明,对包铝的铝合金,不同阳极化试样的疲劳极限差别很小,对于铝合金基材,硫酸阳极化明显降低材料的疲劳极限,铬酸阳极化使材料的疲劳极限下降,而硼酸-硫酸阳极化不降低材料的疲劳极限.并对造成上述现象的原因进行了讨论.     

航空电子接口控制文件的数据库管理

介绍了航空电子接口控制文件的特点和传统管理方法的弊端 ,阐述了将航空电子接口控制文件进行数据库化管理的思想 ,并给出一个实例说明了运用这种思想实现航空电子接口控制文件的数据库管理 ,最后给出了实例中使用ADO进行数据操作的关键代码     

飞机机轮摆振的数字仿真

采用液压减摆器的流体力学模型代替摆振分析中常用的线性或二次阻尼系数,模型中考虑了油液压缩性的影响,采用变化的油液体积弹性模量。采用仿真方法研究飞机机轮的摆振问题。应用快速富氏变换从时域响应获取摆振频率信息。仿真结果与0批K8飞机的滑行实测结果进行了考核对比,仿真所得摆振幅度、频率和含气率等因素对摆振的影响均与实测吻合。     

静止环形扩压叶栅激励下的耦合流动分析

针对某静止环形叶栅的激励实验工作,相应的对扩压叶栅进行了不同气流攻角和激励频率的非定常粘性计算与流场分析。计算中,结合实验结果分析了在不同气流攻角下,激励频率对损失系数、负荷系数、功损比等性能的影响。计算结果揭示了在激励流动下流场的时空结构的变化是流场性能得到提升的根本原因。      

机载总线网络及其发展

从当今机载电子系统对信息传递的需求出发,纵观航空电子综合化系统的发展阶段,说明为了适应新一代航空电子系统的大容量、深层次的信号与信息综合的要求,机载互连手段从较低速率的总线向宽带网络发展成为必然的趋势。介绍了光纤通道(FiberChannel,FC)、可扩展性一致性接口(ScalableCoherentInterface,SCI)以及波分复用光网络等宽带互连方案,给出它们的研究动向,说明它们作为先进综合式航空电子系统统一网络(UniversalAvionicsNetwork,UAN)的候选所具有的特点。     

Preparation and Mechanical Properties of Glass Coats with High Temperature Radar Absorber

BaO-La2O3-B2O3 (BLB) glass, suitable to be used as a sealing between metals, was chosen to be the binder in preparing glass coats on the Ti-alloy substrate. The SiCN nano-powder was introduced as the filler for the absorbing coat because it is considered to be a good high temperature absorber. The effect of the coating temperature and coating time on the tensile strength of the glass coat was investigated and the proper coating parameters to get good mechanical properties were determined. In addition, the effects of the SiCN content on the tensile strength of the absorbing coat were also discussed. Results show that it is possible to prepare the glass coat using the BLB glass as a binder. That the coat formed at 730 ℃ for 30 min has the best tensile strength witnesses 730 ℃, 30 min to be the proper parameter to prepare the glass coat. The BLB glass coat without SiCN powder possesses good tensile strength and the introduc-tion of the SiCN absorber into the glass coat will lower the tensile strength. As the SiCN content increases, the tensile strength of the absorbing coat decreases, which could be attributed to the aggregation of SiCN in the coats.     

一种吸气式结构脉冲爆震发动机调节特性分析

1引言脉冲爆震发动机(PDE)作为一种新概念发动机,是利用间隙式脉冲爆震波产生的高温、高压燃气作用在推力壁上来产生推力的,其产生推力的方式和工作特点决定了它的调节方式与一般的涡喷发动机不同,例如涡喷发动机,可以采用调节供油量的方式改变发动机转速,调节喷管面积改变涡轮