Effect of errors on a contention-based TDMA protocol

A hybrid contention-based time-division multiple access (TDMA) protocol was previously proposed for data transmission (D. Tsai et al., IEEE Trans. on Communications, COM-36, Feb. 1988, p.225-8). It provides satisfactory performance for an error-free channel. The effect of channel errors on the performance of this protocol is studied. To remain operational the protocol must be modified, and the modified protocol is then analyzed. Results derived include the average of frame length, the number of slots wasted, the number of residual packets, and delay. Numerical examples show that channel errors can sometime be damaging but can be recovered by proper error control codes     

超声-回弹综合法对服役钢筋混凝土结构的健康诊测

基于超声-回弹综合法检测混凝土强度技术规程,论述了超声-回弹综合法测强原理、影响因素和测试方法,对服役结构混凝土检测时采用钻芯法进行校准,同时对修正用芯样数量和测试精度进行了理论分析。以廊坊市某工程为例,采用钻芯-超声-回弹综合法推定结构混凝土抗压强度,并对检测数据进行分析,供钢筋混凝土结构检测鉴定参考。     

模拟JJ—7飞机纵向摆动试飞研究

本文论述了BW-1变稳机空中飞行模拟H-7飞机发生两次纵向摆动时飞行状态特性,通过试飞研究其飞行品质,校核驾驶员诱发振荡(PIO)发生的可能性;并对解决PIO的方案进行了验证试飞研究,提出了排除PIO较适宜的参数值.试飞证明,空中飞行模拟试验是研究PIO的有效方法之一.     

H2O2-PE固液火箭发动机低频不稳定燃烧研究

介绍了85％H2O2-PE固液火箭发动机的低频不稳定燃烧特征;应用发动机质量守恒方程对发动机低频耦合振荡燃烧现象进行了一维模拟,分析了氧化剂喷射压降对低频不稳定燃烧的影响。利用扰动分析确立了固液火箭发动机的稳定工作限。提出了抑制低频耦合振荡燃烧的方法。     

反向交叉眼对单脉冲雷达干扰效果分析及仿真验证

交叉眼干扰被认为是对单脉冲雷达干扰最有效的方式之一。基于雷达方程建立了隔离平台回波下的两点源反向交叉眼干扰模型，推导了交叉眼干扰欺骗角一般性公式，研究了干扰机发射天线间距、干扰平台旋转角和干扰机相对雷达之间距离等参数变化对角度欺骗效果的影响，并依据单脉冲雷达接收机获取角度的信息处理流程，建立了单脉冲雷达接收机仿真模型，对交叉眼数学模型的正确性和局限性进行了分析。研究结果表明：单脉冲雷达越靠近两点源交叉眼干扰机中心线、干扰机两发射天线间距越大、与干扰机距离越近时，角度欺骗效果越好；单脉冲雷达的欺骗角度随着与干扰机距离的接近呈指数式增大；数学模型和仿真模型计算的单脉冲雷达角度误差最大值随干扰机天线与雷达天线中心连线的夹角的增大呈指数化增长。研究可为交叉眼干扰工程设计作参考。     

Inverse identification of constitutive parameters of Ti2AlNb intermetallic alloys based on cooperative particle swarm optimization

Ti₂AlNb intermetallic alloy is a relatively newly developed high-temperature-resistant structural material, which is expected to replace nickel-based super alloys for thermally and mechanically stressed components in aeronautic and automotive engines due to its excellent mechanical properties and high strength retention at elevated temperature. The aim of this work is to present a fast and reliable methodology of inverse identification of constitutive model parameters directly from cutting experiments. FE-machining simulations implemented with a modified Johnson-Cook (TANH) constitutive model are performed to establish the robust link between observables and constitutive parameters. A series of orthogonal cutting experiments with varied cutting parameters is carried out to allow an exact comparison to the 2D FE-simulations. A cooperative particle swarm optimization algorithm is developed and implemented into the Matlab programs to identify the enormous constitutive parameters. Results show that the simulation observables (i.e., cutting forces, chip morphologies, cutting temperature) implemented with the identified optimal material constants have high consistency with those obtained from experiments, which illustrates that the FE-machining models using the identified parameters obtained from the proposed methodology could be predicted in a close agreement to the experiments. Considering the wide range of the applied unknown parameters number, the proposed inverse methodology of identifying constitutive equations shows excellent prospect, and it can be used for other newly developed metal materials.     

夜气辉对天基光学碎片探测的影响分析

设计并完成了夜气辉背景下的天基碎片观测试验，获取了综合谱段的观测数据。基于观测数据进行夜气辉的辐射特性及其对天基碎片探测的影响分析。结果表明，夜气辉辐射随纬度和高度呈现一定的分布特点，这些特点均符合夜气辉的理论分布规律。在约90 km处辐射最强，亮度可达到单位积分时间每平方角秒近15星等，这对恒星及碎片提取概率影响较大，其中，13等星的提取概率仅为40.5%。     

Multiscale eigenelement method for periodical composites: A review

Based on the eigenvector expansion idea, the Multiscale Eigenelement Method (MEM) was proposed by the author and co-workers. MEM satisfies two equivalent conditions, one condition is the equivalence of strain energy, and the other is the deformation similarity. These two equivalent conditions character the structure-preserving property of a multiscale analysis method. The equivalence of strain energy is necessary for achieving accurate macro behaviors such as lower order frequencies, while the deformation similarity is essential for predicting accurate micro behaviors such as stresses. The MEM has become a powerful multiscale method for the analysis of composite structures because of its high accuracy and efficiency. In this paper, the research advances of MEM are reviewed and all types of eigenelement methods are compared, focusing on superiorities and deficiencies from practical viewpoint. It is concluded that the eigenelement methods with smooth shape functions are more suitable for the analysis of macro behaviors such as lower order frequencies, and the eigenelement methods with piecewise shape functions are suitable for the analysis of both macro and micro behaviors.     

Orbit determination and prediction of GEO satellite of BeiDou during repositioning maneuver

In order to establish a continuous GEO satellite orbit during repositioning maneuvers, a suitable maneuver force model has been established associated with an optimal orbit determination method and strategy. A continuous increasing acceleration is established by constructing a constant force that is equivalent to the pulse force, with the mass of the satellite decreasing throughout maneuver. This acceleration can be added to other accelerations, such as solar radiation, to obtain the continuous acceleration of the satellite. The orbit determination method and strategy are illuminated, with subsequent assessment of the orbit being determined and predicted accordingly. The orbit of the GEO satellite during repositioning maneuver can be determined and predicted by using C-Band pseudo-range observations of the BeiDou GEO satellite with COSPAR ID 2010-001A in 2011 and 2012. The results indicate that observations before maneuver do affect orbit determination and prediction, and should therefore be selected appropriately. A more precise orbit and prediction can be obtained compared to common short arc methods when observations starting 1 day prior the maneuver and 2 h after the maneuver are adopted in POD (Precise Orbit Determination). The achieved URE (User Range Error) under non-consideration of satellite clock errors is better than 2 m within the first 2 h after maneuver, and less than 3 m for further 2 h of orbit prediction.